Euclidean Allocation Tool
أداة التخصيص
الإقليدي
ArcMap
ArcGIS
How to use Euclidean
Allocation Tool in Arc Toolbox??
كيفية استخدام أداة التخصيص الإقليدي ؟؟
Path to access the toolمسار الوصول الى الأداة
:
Euclidean Allocation Tool, Distance Toolset, Spatial Analyst Tools Toolbox
Euclidean Allocation
Calculates, for each
cell, the nearest source based on Euclidean distance.
تحسب أقرب مصدر لكل خلية بناءً على المسافة
الإقليدية.
1.
Input raster or feature source data أدخل البيانات النقطية او مصدر بيانات المعلم
The input source
locations.
This is a raster or
feature dataset that identifies the cells or locations to which the Euclidean
distance for every output cell location is calculated.
For rasters, the input
type can be integer or floating point.
If the input source
raster is floating point, the Input value raster parameter must be set, and it
must be integer. The value raster will take precedence over the Source field
parameter setting.
مواقع مصدر الإدخال.
هذه مجموعة بيانات نقطية أو ميزة تحدد الخلايا أو
المواقع التي يتم فيها حساب المسافة الإقليدية لكل موقع خلية إخراج.
بالنسبة إلى البيانات النقطية ، يمكن أن يكون نوع
الإدخال عددًا صحيحًا أو نقطة عائمة.
إذا كانت البيانات النقطية لمصدر الإدخال هي
النقطة العائمة ، فيجب تعيين معلمة البيانات النقطية لقيمة الإدخال ، ويجب أن تكون
عددًا صحيحًا. ستأخذ القيمة النقطية الأسبقية على إعداد معلمة الحقل المصدر.
Source field (optional)
The field used to assign values to the source locations. It must be of
integer type.
If the Input value raster parameter has been set, the values in that input
will have precedence over the Source field parameter setting.
Output allocation raster
The output Euclidean allocation raster.
The cell values (zones) identify the nearest source location.
The output raster is of integer type.
Input barrier raster or feature
class (optional)
The dataset that defines the barriers.
The barriers can be defined by an integer or a floating-point raster, or
by a feature layer.
Input value raster (optional)
The input integer raster that identifies the zone values that will be used
for each input source location.
For each source location (cell or feature), the Input value raster value
will be assigned to all cells allocated to the source location for the
computation. The value raster will take precedence over the Source field
parameter setting.
Maximum distance (optional)
The threshold that the accumulative distance values cannot exceed.
If an accumulative Euclidean distance value exceeds this value, the output
value for the cell location will be NoData.
The default distance is to the edge of the output raster.
Output cell size (optional)
The cell size of the output raster that will be created.
This parameter can be defined by a numeric value or obtained from an
existing raster dataset. If the cell size hasn't been explicitly specified as
the parameter value, the environment cell size value will be used if specified;
otherwise, additional rules will be used to calculate it from the other inputs.
See the usage for more detail.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
2.
Source field (optional) حقل المصدر
(اختياري)
The field used to assign
values to the source locations. It must be of integer type.
If the Input value
raster parameter has been set, the values in that input will have precedence
over the Source field parameter setting.
الحقل المستخدم لتعيين قيم لمواقع المصدر. يجب أن
يكون من نوع عدد صحيح.
إذا تم تعيين معلمة البيانات النقطية لقيمة
الإدخال ، فستكون للقيم الموجودة في هذا الإدخال الأسبقية على إعداد معلمة حقل
المصدر.
Output allocation raster
The output Euclidean allocation raster.
The cell values (zones) identify the nearest source location.
The output raster is of integer type.
Input barrier raster or feature
class (optional)
The dataset that defines the barriers.
The barriers can be defined by an integer or a floating-point raster, or
by a feature layer.
Input value raster (optional)
The input integer raster that identifies the zone values that will be used
for each input source location.
For each source location (cell or feature), the Input value raster value
will be assigned to all cells allocated to the source location for the
computation. The value raster will take precedence over the Source field parameter
setting.
Maximum distance (optional)
The threshold that the accumulative distance values cannot exceed.
If an accumulative Euclidean distance value exceeds this value, the output
value for the cell location will be NoData.
The default distance is to the edge of the output raster.
Output cell size (optional)
The cell size of the output raster that will be created.
This parameter can be defined by a numeric value or obtained from an
existing raster dataset. If the cell size hasn't been explicitly specified as
the parameter value, the environment cell size value will be used if specified;
otherwise, additional rules will be used to calculate it from the other inputs.
See the usage for more detail.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster (optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
3.
Output allocation raster تخصيص
البيانات النقطية المخرجة
The output Euclidean
allocation raster.
The cell values (zones)
identify the nearest source location.
The output raster is of
integer type.
الناتج النقطي الإقليدي للتخصيص.
تحدد قيم الخلية (المناطق) أقرب موقع مصدر.
الناتج النقطي من نوع عدد صحيح.
Input barrier raster or feature
class (optional)
The dataset that defines the barriers.
The barriers can be defined by an integer or a floating-point raster, or
by a feature layer.
Input value raster (optional)
The input integer raster that identifies the zone values that will be used
for each input source location.
For each source location (cell or feature), the Input value raster value
will be assigned to all cells allocated to the source location for the
computation. The value raster will take precedence over the Source field
parameter setting.
Maximum distance (optional)
The threshold that the accumulative distance values cannot exceed.
If an accumulative Euclidean distance value exceeds this value, the output
value for the cell location will be NoData.
The default distance is to the edge of the output raster.
Output cell size (optional)
The cell size of the output raster that will be created.
This parameter can be defined by a numeric value or obtained from an
existing raster dataset. If the cell size hasn't been explicitly specified as
the parameter value, the environment cell size value will be used if specified;
otherwise, additional rules will be used to calculate it from the other inputs.
See the usage for more detail.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
4.
Input barrier raster or feature class (optional) حاجز الإدخال النقطي أو فئة الميزة (اختياري)
The dataset that defines
the barriers.
The barriers can be defined
by an integer or a floating-point raster, or by a feature layer.
مجموعة البيانات التي تحدد الحواجز.
يمكن تعريف الحواجز بواسطة عدد صحيح أو نقطية
فاصلة عائمة ، أو بواسطة طبقة معالم.
Input value raster (optional)
The input integer raster that identifies the zone values that will be used
for each input source location.
For each source location (cell or feature), the Input value raster value
will be assigned to all cells allocated to the source location for the
computation. The value raster will take precedence over the Source field
parameter setting.
Maximum distance (optional)
The threshold that the accumulative distance values cannot exceed.
If an accumulative Euclidean distance value exceeds this value, the output
value for the cell location will be NoData.
The default distance is to the edge of the output raster.
Output cell size (optional)
The cell size of the output raster that will be created.
This parameter can be defined by a numeric value or obtained from an
existing raster dataset. If the cell size hasn't been explicitly specified as
the parameter value, the environment cell size value will be used if specified;
otherwise, additional rules will be used to calculate it from the other inputs.
See the usage for more detail.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
5.
Input value raster (optional) قيمة
الإدخال النقطية (اختياري)
The input integer raster
that identifies the zone values that will be used for each input source location.
For each source location
(cell or feature), the Input value raster value will be assigned to all cells
allocated to the source location for the computation. The value raster will
take precedence over the Source field parameter setting.
الرقم النقطي للإدخال الصحيح الذي يحدد قيم
المنطقة التي سيتم استخدامها لكل موقع مصدر إدخال.
لكل موقع مصدر (خلية أو ميزة) ، سيتم تعيين قيمة
البيانات النقطية لقيمة الإدخال لجميع الخلايا المخصصة لموقع المصدر من أجل
الحساب. ستأخذ القيمة النقطية الأسبقية على إعداد معلمة الحقل المصدر.
Maximum distance (optional)
The threshold that the accumulative distance values cannot exceed.
If an accumulative Euclidean distance value exceeds this value, the output
value for the cell location will be NoData.
The default distance is to the edge of the output raster.
Output cell size (optional)
The cell size of the output raster that will be created.
This parameter can be defined by a numeric value or obtained from an
existing raster dataset. If the cell size hasn't been explicitly specified as
the parameter value, the environment cell size value will be used if specified;
otherwise, additional rules will be used to calculate it from the other inputs.
See the usage for more detail.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to the
closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
6.
Maximum distance (optional) أقصى
مسافة (اختياري)
The threshold that the
accumulative distance values cannot exceed.
If an accumulative
Euclidean distance value exceeds this value, the output value for the cell
location will be NoData.
The default distance is
to the edge of the output raster.
العتبة التي لا يمكن لقيم المسافة التراكمية
تجاوزها.
إذا تجاوزت قيمة المسافة الإقليدية التراكمية هذه
القيمة ، فإن قيمة الإخراج لموقع الخلية ستكون NoData.
المسافة الافتراضية إلى حافة البيانات النقطية
الناتجة.
Output cell size (optional)
The cell size of the output raster that will be created.
This parameter can be defined by a numeric value or obtained from an
existing raster dataset. If the cell size hasn't been explicitly specified as
the parameter value, the environment cell size value will be used if specified;
otherwise, additional rules will be used to calculate it from the other inputs.
See the usage for more detail.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
7.
Output cell size (optional) حجم
الخلية المخرج (اختياري)
The cell size of the
output raster that will be created.
This parameter can be
defined by a numeric value or obtained from an existing raster dataset. If the
cell size hasn't been explicitly specified as the parameter value, the
environment cell size value will be used if specified; otherwise, additional
rules will be used to calculate it from the other inputs. See the usage for
more detail.
حجم خلية البيانات النقطية الناتجة التي سيتم
إنشاؤها.
يمكن تحديد هذه المعلمة بقيمة عددية أو الحصول
عليها من مجموعة بيانات نقطية موجودة. إذا لم يتم تحديد حجم الخلية بشكل صريح
كقيمة المعلمة ، فسيتم استخدام قيمة حجم خلية البيئة إذا تم تحديدها ؛ خلاف ذلك ،
سيتم استخدام قواعد إضافية لحسابها من المدخلات الأخرى. انظر الاستخدام لمزيد من
التفاصيل.
Distance method (optional)
Specifies whether to calculate the distance using a planar (flat earth) or
a geodesic (ellipsoid) method.
· PLANAR—The distance calculation will be performed on a projected flat
plane using a 2D Cartesian coordinate system. This is the default.
· GEODESIC—The distance calculation will be performed on the ellipsoid.
Therefore, regardless of input or output projection, the results do not change.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
8.
Distance method (optional) طريقة
المسافة (اختياري)
Specifies whether to
calculate the distance using a planar (flat earth) or a geodesic (ellipsoid)
method.
·
PLANAR—The distance calculation will be performed on a projected
flat plane using a 2D Cartesian coordinate system. This is the default.
·
GEODESIC—The distance calculation will be performed on the
ellipsoid. Therefore, regardless of input or output projection, the results do
not change.
يحدد ما إذا كان سيتم حساب المسافة باستخدام طريقة
مستوية (أرض مسطحة) أو طريقة جيوديسية (بيضاوية).
• PLANAR -
سيتم إجراء حساب المسافة على مستوى مسطح مُسقط باستخدام نظام إحداثيات ديكارت
ثنائي الأبعاد. هذا هو الافتراضي.
• الجيوديسي - سيتم إجراء
حساب المسافة على الشكل البيضاوي. لذلك ، بغض النظر عن إسقاط المدخلات أو المخرجات
، فإن النتائج لا تتغير.
Output distance raster (optional)
The output Euclidean distance raster.
The distance raster identifies, for each cell, the Euclidean distance to
the closest source cell, set of source cells, or source location.
The output raster is of floating-point type.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
9.
Output distance raster (optional) مخرج
مسافة البيانات النقطية (اختياري)
The output Euclidean
distance raster.
The distance raster
identifies, for each cell, the Euclidean distance to the closest source cell,
set of source cells, or source location.
The output raster is of
floating-point type.
الناتج المسافة الإقليدية النقطية.
تحدد المسافة النقطية ، لكل خلية ، المسافة
الإقليدية لأقرب خلية مصدر ، أو مجموعة من الخلايا المصدر ، أو موقع المصدر.
النقطية الناتجة هي من نوع النقطة العائمة.
Output direction raster (optional)
The output Euclidean direction raster.
The direction raster contains the calculated direction, in degrees, that
each cell center is from the closest source cell center.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of integer type.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
10.
Output direction raster (optional) مخرج
اتجاه البيانات النقطية (اختياري)
The output Euclidean
direction raster.
The direction raster
contains the calculated direction, in degrees, that each cell center is from
the closest source cell center.
The range of values is
from 0 degrees to 360 degrees, with 0 reserved for the source cells. Due east
(right) is 90, and the values increase clockwise (180 is south, 270 is west,
and 360 is north).
The output raster is of
integer type.
الناتج الاتجاه الإقليدي النقطي.
يحتوي الاتجاه النقطي على الاتجاه المحسوب
بالدرجات ، حيث يكون كل مركز خلية من أقرب مركز خلية مصدر.
نطاق القيم من 0 درجة إلى 360 درجة ، مع 0 محجوز
للخلايا المصدر. شرق (يمين) يساوي 90 ، والقيم تزيد في اتجاه عقارب الساعة (180
جنوبًا ، 270 غربًا ، 360 شمالًا).
الناتج النقطي من نوع عدد صحيح.
Output back direction raster
(optional)
The output Euclidean back direction raster.
The back direction raster contains the calculated direction in degrees.
The direction identifies the next cell along the shortest path back to the
closest source while avoiding barriers.
The range of values is from 0 degrees to 360 degrees, with 0 reserved for
the source cells. Due east (right) is 90, and the values increase clockwise
(180 is south, 270 is west, and 360 is north).
The output raster is of type float.
11.
Output back direction raster (optional) مخرج الاتجاه الخلفي للبيانات النقطية (اختياري)
The output Euclidean
back direction raster.
The back direction
raster contains the calculated direction in degrees. The direction identifies
the next cell along the shortest path back to the closest source while avoiding
barriers.
The range of values is
from 0 degrees to 360 degrees, with 0 reserved for the source cells. Due east
(right) is 90, and the values increase clockwise (180 is south, 270 is west,
and 360 is north).
The output raster is of
type float.
الإخراج الإقليدي الخلفي الاتجاه النقطي.
يحتوي خط الاتجاه الخلفي النقطي على الاتجاه
المحسوب بالدرجات. يحدد الاتجاه الخلية التالية على طول أقصر مسار للعودة إلى أقرب
مصدر مع تجنب الحواجز.
نطاق القيم من 0 درجة إلى 360 درجة ، مع 0 محجوز
للخلايا المصدر. شرق (يمين) يساوي 90 ، والقيم تزيد في اتجاه عقارب الساعة (180
جنوبًا ، 270 غربًا ، 360 شمالًا).
الناتج النقطي هو نوع تعويم.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق