Apply Block Adjustment Tool
أداة تطبيق ضبط
الكتلة
ArcMap ArcGIS
How to Apply Block
Adjustment Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة تطبيق ضبط الكتلة ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Apply
Block Adjustment Tool, Ortho Mapping Toolset, Raster
Box, Data Management Tools Toolbox
Apply Block Adjustment
Applies the geographic
adjustments to the mosaic dataset items. This tool uses the solution table from
the Compute Block Adjustments tool.
This tool can also reset
the geographic adjustments back to the original location.
يطبق التعديلات الجغرافية على عناصر مجموعة بيانات
دمج الصور. تستخدم هذه الأداة جدول الحلول من أداة Compute Block Adjustments.
يمكن لهذه الأداة أيضًا إعادة تعيين التعديلات الجغرافية
إلى الموقع الأصلي.
Input
Mosaic Dataset
The input mosaic dataset to adjust.
Adjustment
Operation
Choose whether you want to adjust the mosaic dataset using the solution
table or if you want to reset the mosaic dataset so there are no adjustments
applied.
· ADJUST—Adjust the mosaic dataset using the input solution table.
· RESET—Reset the mosaic dataset so there are no adjustments applied to it.
Input
Solution Table (optional)
Specify a solution table to use when adjusting your mosaic dataset. This
is the output from the Compute Block Adjustments tool.
Pan-To-MS
Scaling Factor (optional)
If your mosaic dataset contains pan-sharpened rasters, specify the scaling
factor between the pan-sharpened resolution and the multispectral resolution.
Input DEM
(optional)
A DEM to use within the application of the block adjustment. This DEM will
only be used if it is a higher resolution than any DEM that may already exist
within the mosaic dataset.
If this input DEM is used, the geometric function of the mosaic dataset
will be updated using this input.
Z offset
(optional)
The vertical offset used to adjust the elevation layer within the mosaic
dataset's Geometric function.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
1.
Input Mosaic Dataset أدخل مجموعة
بيانات دمج الصور
The input mosaic dataset
to adjust.
مجموعة بيانات إدخال دمج الصور المراد ضبطها.
Adjustment
Operation
Choose whether you want to adjust the mosaic dataset using the solution
table or if you want to reset the mosaic dataset so there are no adjustments
applied.
· ADJUST—Adjust the mosaic dataset using the input solution table.
· RESET—Reset the mosaic dataset so there are no adjustments applied to it.
Input
Solution Table (optional)
Specify a solution table to use when adjusting your mosaic dataset. This
is the output from the Compute Block Adjustments tool.
Pan-To-MS
Scaling Factor (optional)
If your mosaic dataset contains pan-sharpened rasters, specify the scaling
factor between the pan-sharpened resolution and the multispectral resolution.
Input DEM
(optional)
A DEM to use within the application of the block adjustment. This DEM will
only be used if it is a higher resolution than any DEM that may already exist
within the mosaic dataset.
If this input DEM is used, the geometric function of the mosaic dataset
will be updated using this input.
Z offset
(optional)
The vertical offset used to adjust the elevation layer within the mosaic
dataset's Geometric function.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
2.
Adjustment Operation عملية الضبط
Choose whether you want
to adjust the mosaic dataset using the solution table or if you want to reset
the mosaic dataset so there are no adjustments applied.
·
ADJUST—Adjust the mosaic dataset using the input solution table.
·
RESET—Reset the mosaic dataset so there are no adjustments applied
to it.
اختر ما إذا كنت تريد ضبط مجموعة بيانات الفسيفساء
باستخدام جدول الحلول أو إذا كنت تريد إعادة تعيين مجموعة بيانات دمج الصور بحيث
لا يتم تطبيق أي تعديلات.
• ADJUST -
اضبط مجموعة بيانات دمج الصور باستخدام جدول حلول الإدخال.
• إعادة تعيين - إعادة
تعيين مجموعة بيانات دمج الصور بحيث لا يتم تطبيق أي تعديلات عليها.
Input
Solution Table (optional)
Specify a solution table to use when adjusting your mosaic dataset. This
is the output from the Compute Block Adjustments tool.
Pan-To-MS
Scaling Factor (optional)
If your mosaic dataset contains pan-sharpened rasters, specify the scaling
factor between the pan-sharpened resolution and the multispectral resolution.
Input DEM
(optional)
A DEM to use within the application of the block adjustment. This DEM will
only be used if it is a higher resolution than any DEM that may already exist
within the mosaic dataset.
If this input DEM is used, the geometric function of the mosaic dataset
will be updated using this input.
Z offset
(optional)
The vertical offset used to adjust the elevation layer within the mosaic
dataset's Geometric function.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
3.
Input Solution Table (optional) جدول
حل الإدخال (اختياري)
Specify a solution table
to use when adjusting your mosaic dataset. This is the output from the Compute
Block Adjustments tool.
حدد جدول حل لاستخدامه عند ضبط مجموعة بيانات دمج
الصور. هذا هو الناتج من أداة Compute Block Adjustments.
Pan-To-MS
Scaling Factor (optional)
If your mosaic dataset contains pan-sharpened rasters, specify the scaling
factor between the pan-sharpened resolution and the multispectral resolution.
Input DEM
(optional)
A DEM to use within the application of the block adjustment. This DEM will
only be used if it is a higher resolution than any DEM that may already exist
within the mosaic dataset.
If this input DEM is used, the geometric function of the mosaic dataset
will be updated using this input.
Z offset
(optional)
The vertical offset used to adjust the elevation layer within the mosaic
dataset's Geometric function.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
4.
Pan-To-MS Scaling Factor (optional) مُعامل التحجيم (اختياري)
If your mosaic dataset
contains pan-sharpened rasters, specify the scaling factor between the
pan-sharpened resolution and the multispectral resolution.
إذا كانت مجموعة بيانات دمج الصور الخاصة بك تحتوي
على نقطية حادة بشكل شامل ، فحدد عامل التحجيم بين دقة الوضوح الشاملة والدقة
متعددة الأطياف.
Input DEM
(optional)
A DEM to use within the application of the block adjustment. This DEM will
only be used if it is a higher resolution than any DEM that may already exist
within the mosaic dataset.
If this input DEM is used, the geometric function of the mosaic dataset
will be updated using this input.
Z offset
(optional)
The vertical offset used to adjust the elevation layer within the mosaic
dataset's Geometric function.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
5.
Input DEM (optional) نموذج الارتفاع الرقمي المدخل (اختياري)
A DEM to use within the
application of the block adjustment. This DEM will only be used if it is a
higher resolution than any DEM that may already exist within the mosaic
dataset.
If this input DEM is
used, the geometric function of the mosaic dataset will be updated using this
input.
DEM
لاستخدامه في تطبيق تعديل الكتلة. سيتم استخدام DEM فقط
إذا كانت دقة أعلى من أي DEM قد
تكون موجودة بالفعل ضمن مجموعة بيانات دمج الصور.
إذا تم استخدام هذا الإدخال DEM ،
فسيتم تحديث الوظيفة الهندسية لمجموعة بيانات دمج الصور باستخدام هذا الإدخال.
Z offset
(optional)
The vertical offset used to adjust the elevation layer within the mosaic
dataset's Geometric function.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
6.
Z offset (optional) إزاحة الارتفاع (اختياري)
The vertical offset used
to adjust the elevation layer within the mosaic dataset's Geometric function.
تُستخدم الإزاحة الرأسية لضبط طبقة الارتفاع ضمن
الوظيفة الهندسية لمجموعة بيانات دمج الصور.
Control
Point Table (optional)
The input control point table will have the same adjustments applied as
the solution table adjustments.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
7.
Control Point Table (optional) جدول
نقطة التحكم (اختياري)
The input control point
table will have the same adjustments applied as the solution table adjustments.
سيكون لجدول نقطة التحكم في الإدخال نفس التعديلات
المطبقة مثل تعديلات جدول الحل.
Adjust
Footprints (optional)
Choose whether to update the footprint geometry using the same
transformation that was applied to the image.
· Unchecked—Do not update the footprint geometry. This is the default.
· Checked—Update the footprint geometry to the image geometry. The control
point table will also be transformed, if one is provided.
8.
Adjust Footprints (optional) ضبط
آثار الأقدام (اختياري)
Choose whether to update
the footprint geometry using the same transformation that was applied to the
image.
·
Unchecked—Do not update the footprint geometry. This is the
default.
·
Checked—Update the footprint geometry to the image geometry. The
control point table will also be transformed, if one is provided.
اختر ما إذا كنت تريد تحديث هندسة المساحة
باستخدام نفس التحويل الذي تم تطبيقه على الصورة.
• غير محدد - لا تقم
بتحديث هندسة البصمة. هذا هو الافتراضي.
• تم التحديد - قم بتحديث
هندسة البصمة إلى هندسة الصورة. سيتم أيضًا تحويل جدول نقطة التحكم ، إذا تم
توفيره.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق