Append Control Points Tool
أداة إلحاق نقاط
التحكم
ArcMap ArcGIS
How to Append Control
Points Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة إلحاق نقاط التحكم ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Append
Control Points Tool, Ortho Mapping Toolset, Raster
Box, Data Management Tools Toolbox
Append Control Points
Combines control points
to an existing control point table.
The points to be
appended are the results from either the Compute Tie Points tool or the Compute
Control Points tool, or a point feature class.
يجمع نقاط التحكم في جدول نقاط التحكم الموجود.
النقاط المراد إلحاقها هي النتائج من أداة Compute Tie Points أو أداة Compute Control Points أو من
فئة معلم النقاط.
1.
Target Control Points نقاط التحكم
الهدف
The input control point
table. This is usually the output from the Compute Tie Points tool.
جدول نقطة التحكم في الإدخال. عادة ما يكون هذا هو
الناتج من أداة Compute Tie Points.
Input
Control Points
A point feature class that stores control points. It could be the control
point table created from the Compute Control Points tool, the Compute Tie
Points tool, or a point feature class that has ground control points.
Z Value
Field Name (optional)
The field that stores the control point z-values.
If both the Z Value Field Name and the Input DEM parameters are set, the Z
value field is used. If neither the Z Value Field Name nor the Input DEM
parameter is set, the z-value is set to 0 for all ground control points and
check points.
Tag Field
Name (optional)
A field in the input control point table that has a unique value. This
field will be added to the target control point table, where the tag field can
be used to bring in identifiers associated with ground control points.
Input DEM
(optional)
A DEM to use to obtain the z-value for the control points in the input
control point table.
If both the Z Value Field Name and Input DEM parameters are set, the Z
value field is used. If neither the Z Value Field Name nor the Input DEM
parameter is set, the z-value is set to 0 for all ground control points and
check points.
XY
Accuracy (optional)
The input accuracy for the X and Y coordinates. The accuracy is in the
same units as the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Z Accuracy
(optional)
The input accuracy for the vertical coordinates. The accuracy is in the
units of the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
2.
Input Control Points نقاط التحكم
المدخلة
A point feature class
that stores control points. It could be the control point table created from
the Compute Control Points tool, the Compute Tie Points tool, or a point
feature class that has ground control points.
فئة ميزة النقطة التي تخزن نقاط التحكم. يمكن أن
يكون جدول نقطة التحكم الذي تم إنشاؤه من أداة حساب نقاط التحكم ، أو أداة حساب
نقاط التعادل ، أو فئة معلم النقطة التي تحتوي على نقاط تحكم أرضية.
Z Value
Field Name (optional)
The field that stores the control point z-values.
If both the Z Value Field Name and the Input DEM parameters are set, the Z
value field is used. If neither the Z Value Field Name nor the Input DEM
parameter is set, the z-value is set to 0 for all ground control points and
check points.
Tag Field
Name (optional)
A field in the input control point table that has a unique value. This
field will be added to the target control point table, where the tag field can
be used to bring in identifiers associated with ground control points.
Input DEM
(optional)
A DEM to use to obtain the z-value for the control points in the input
control point table.
If both the Z Value Field Name and Input DEM parameters are set, the Z
value field is used. If neither the Z Value Field Name nor the Input DEM
parameter is set, the z-value is set to 0 for all ground control points and
check points.
XY
Accuracy (optional)
The input accuracy for the X and Y coordinates. The accuracy is in the
same units as the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Z Accuracy
(optional)
The input accuracy for the vertical coordinates. The accuracy is in the
units of the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
3.
Z Value Field Name (optional) اسم
حقل قيمة الارتفاع (اختياري)
The field that stores
the control point z-values.
If both the Z Value
Field Name and the Input DEM parameters are set, the Z value field is used. If
neither the Z Value Field Name nor the Input DEM parameter is set, the z-value
is set to 0 for all ground control points and check points.
الحقل الذي يخزن قيم z لنقطة
التحكم.
إذا تم تعيين كل من اسم حقل القيمة Z
ومعلمات إدخال DEM ، فسيتم استخدام حقل القيمة Z. إذا
لم يتم تعيين اسم حقل القيمة Z أو
معلمة الإدخال DEM ، فسيتم تعيين القيمة z على 0
لجميع نقاط التحكم الأرضية ونقاط الفحص.
Tag Field
Name (optional)
A field in the input control point table that has a unique value. This
field will be added to the target control point table, where the tag field can
be used to bring in identifiers associated with ground control points.
Input DEM
(optional)
A DEM to use to obtain the z-value for the control points in the input
control point table.
If both the Z Value Field Name and Input DEM parameters are set, the Z
value field is used. If neither the Z Value Field Name nor the Input DEM
parameter is set, the z-value is set to 0 for all ground control points and
check points.
XY
Accuracy (optional)
The input accuracy for the X and Y coordinates. The accuracy is in the
same units as the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Z Accuracy
(optional)
The input accuracy for the vertical coordinates. The accuracy is in the
units of the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
4.
Tag Field Name (optional) اسم حقل
العلامة (اختياري)
A field in the input
control point table that has a unique value. This field will be added to the
target control point table, where the tag field can be used to bring in
identifiers associated with ground control points.
حقل في جدول نقاط التحكم في الإدخال له قيمة فريدة.
ستتم إضافة هذا الحقل إلى جدول نقطة التحكم الهدف ، حيث يمكن استخدام حقل العلامة
لإحضار المعرفات المرتبطة بنقاط التحكم الأرضية.
Input DEM
(optional)
A DEM to use to obtain the z-value for the control points in the input
control point table.
If both the Z Value Field Name and Input DEM parameters are set, the Z
value field is used. If neither the Z Value Field Name nor the Input DEM
parameter is set, the z-value is set to 0 for all ground control points and
check points.
XY
Accuracy (optional)
The input accuracy for the X and Y coordinates. The accuracy is in the
same units as the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Z Accuracy
(optional)
The input accuracy for the vertical coordinates. The accuracy is in the
units of the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
5.
Input DEM (optional) نموذج الارتفاع الرقمي المدخل (اختياري)
A DEM to use to obtain
the z-value for the control points in the input control point table.
If both the Z Value
Field Name and Input DEM parameters are set, the Z value field is used. If
neither the Z Value Field Name nor the Input DEM parameter is set, the z-value
is set to 0 for all ground control points and check points.
DEM
لاستخدامه للحصول على قيمة z لنقاط
التحكم في جدول نقطة التحكم في الإدخال.
إذا تم تعيين كل من معلمات اسم حقل القيمة Z
ومعلمات إدخال DEM ، فسيتم استخدام حقل القيمة Z. إذا
لم يتم تعيين اسم حقل القيمة Z أو
معلمة الإدخال DEM ، فسيتم تعيين القيمة z على 0
لجميع نقاط التحكم الأرضية ونقاط الفحص.
XY
Accuracy (optional)
The input accuracy for the X and Y coordinates. The accuracy is in the
same units as the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Z Accuracy
(optional)
The input accuracy for the vertical coordinates. The accuracy is in the
units of the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
6.
XY Accuracy (optional) دقة
الإحداثيات (اختياري)
The input accuracy for
the X and Y coordinates. The accuracy is in the same units as the Input Control
Points.
This information should
be provided by the data provider. If the accuracy information is not available,
leave this optional parameter blank.
دقة الإدخال للإحداثيات X و Y.
الدقة في نفس وحدات نقاط التحكم في الإدخال.
يجب توفير هذه المعلومات من قبل مزود البيانات.
إذا كانت معلومات الدقة غير متوفرة ، فاترك هذه المعلمة الاختيارية فارغة.
Z Accuracy
(optional)
The input accuracy for the vertical coordinates. The accuracy is in the
units of the Input Control Points.
This information should be provided by the data provider. If the accuracy
information is not available, leave this optional parameter blank.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
7.
Z Accuracy (optional) دقة الارتفاع (اختياري)
The input accuracy for
the vertical coordinates. The accuracy is in the units of the Input Control
Points.
This information should
be provided by the data provider. If the accuracy information is not available,
leave this optional parameter blank.
دقة الإدخال للإحداثيات العمودية. الدقة في وحدات
نقاط التحكم في الإدخال.
يجب توفير هذه المعلومات من قبل مزود البيانات.
إذا كانت معلومات الدقة غير متوفرة ، فاترك هذه المعلمة الاختيارية فارغة.
Geoid
(optional)
The geoid correction is required by rational polynomial coefficients (RPC)
that reference ellipsoidal heights. Most elevation datasets are referenced to
sea level orthometric heights, so this correction would be required in these
cases to convert to ellipsoidal heights.
· Unchecked—No geoid correction is made. Use this option only if your DEM is
already expressed in ellipsoidal heights. This is the default.
· Checked—A geoid correction will be made to convert orthometric heights to
ellipsoidal heights (based on EGM96 geoid).
8.
Geoid (optional) جيويد (اختياري)
The geoid correction is
required by rational polynomial coefficients (RPC) that reference ellipsoidal
heights. Most elevation datasets are referenced to sea level orthometric
heights, so this correction would be required in these cases to convert to
ellipsoidal heights.
·
Unchecked—No geoid correction is made. Use this option only if
your DEM is already expressed in ellipsoidal heights. This is the default.
·
Checked—A geoid correction will be made to convert orthometric
heights to ellipsoidal heights (based on EGM96 geoid).
تصحيح الجيود مطلوب من خلال معاملات كثيرة الحدود
المنطقية (RPC) التي تشير إلى ارتفاعات بيضاوية الشكل. تتم الإشارة إلى معظم
مجموعات بيانات الارتفاع إلى ارتفاعات قياس مستوى سطح البحر ، لذلك سيكون هذا
التصحيح مطلوبًا في هذه الحالات للتحويل إلى ارتفاعات بيضاوية الشكل.
• لم يتم التحقق منه - لم
يتم إجراء تصحيح للجيود. استخدم هذا الخيار فقط إذا تم التعبير عن DEM
بالفعل في ارتفاعات بيضاوية. هذا هو الافتراضي.
• تم الفحص - سيتم إجراء
تصحيح جيود لتحويل الارتفاعات التقويمية إلى ارتفاعات بيضاوية الشكل (بناءً على
الجيود EGM96).
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق