نفخة مسامية Porous Puff

القائمة الرئيسية

الصفحات

نفخة مسامية Porous Puff

لمتابعة موقعنا ليصلك كل جديد إضغط هنا


Porous Puff Tool

أداة نفخة مسامية

ArcMap ArcGIS

How to use Porous Puff Tool in Arc Toolbox??

كيفية استخدام أداة نفخة مسامية ؟؟

كيفية استخدام أداة نفخة مسامية ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Porous Puff Tool, Groundwater Toolset, Spatial Analyst Tools Toolbox

Porous Puff Tool 

Porous Puff

Calculates the time-dependent, two-dimensional concentration distribution in mass per volume of a solute introduced instantaneously and at a discrete point into a vertically mixed aquifer.

لحساب توزيع التركيز ثنائي الأبعاد المعتمد على الوقت بالكتلة لكل حجم لمذاب يتم إدخاله على الفور وعند نقطة منفصلة في خزان جوفي مختلط رأسياً.

1.    Input particle track file إدخال ملف مسار الجسيمات

The input particle track path file.

This is an ASCII text file containing information about the position, the local velocity vector, and the cumulative length and time of travel along the path.

This file is generated using the Particle Track tool.

ملف مسار مسار الإدخال.

هذا ملف نصي ASCII يحتوي على معلومات حول الموقع ومتجه السرعة المحلي والطول التراكمي ووقت السفر على طول المسار.

يتم إنشاء هذا الملف باستخدام أداة Particle Track.

Input effective formation porosity raster

The input raster where each cell value represents the effective formation porosity at that location.

Input saturated thickness raster

The input raster where each cell value represents the saturated thickness at that location.

The value for the thickness is interpreted from geological properties of the aquifer.

Output raster

The output raster of the concentration distribution.

Each cell value represents the concentration at that location.

Mass

A value for the amount of mass released instantaneously at the source point, in units of mass.

Dispersion time (optional)

A value representing the time horizon for dispersion of the solute, in units of time.

The time must be less than or equal to the maximum time in the track file. If the requested time exceeds the available time from the track file, the tool is aborted. The default time is the latest time (corresponding to the terminal point) in the track file.

Longitudinal dispersivity (optional)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

2.    Input effective formation porosity raster المدخلات النقطية لتشكيل المسامية الفعالة

The input raster where each cell value represents the effective formation porosity at that location.

البيانات النقطية المدخلة حيث تمثل كل قيمة خلية المسامية الفعالة للتكوين في هذا الموقع.

Input saturated thickness raster

The input raster where each cell value represents the saturated thickness at that location.

The value for the thickness is interpreted from geological properties of the aquifer.

Output raster

The output raster of the concentration distribution.

Each cell value represents the concentration at that location.

Mass

A value for the amount of mass released instantaneously at the source point, in units of mass.

Dispersion time (optional)

A value representing the time horizon for dispersion of the solute, in units of time.

The time must be less than or equal to the maximum time in the track file. If the requested time exceeds the available time from the track file, the tool is aborted. The default time is the latest time (corresponding to the terminal point) in the track file.

Longitudinal dispersivity (optional)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

3.    Input saturated thickness raster إدخال سمك البيانات النقطية

The input raster where each cell value represents the saturated thickness at that location.

The value for the thickness is interpreted from geological properties of the aquifer.

البيانات النقطية المدخلة حيث تمثل كل قيمة خلية السُمك المشبع في ذلك الموقع.

يتم تفسير قيمة السماكة من الخصائص الجيولوجية لطبقة المياه الجوفية.

Output raster

The output raster of the concentration distribution.

Each cell value represents the concentration at that location.

Mass

A value for the amount of mass released instantaneously at the source point, in units of mass.

Dispersion time (optional)

A value representing the time horizon for dispersion of the solute, in units of time.

The time must be less than or equal to the maximum time in the track file. If the requested time exceeds the available time from the track file, the tool is aborted. The default time is the latest time (corresponding to the terminal point) in the track file.

Longitudinal dispersivity (optional)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

4.    Output raster البيانات النقطية المخرجة

The output raster of the concentration distribution.

Each cell value represents the concentration at that location.

النقطية الناتجة لتوزيع التركيز.

تمثل كل قيمة خلية التركيز في ذلك الموقع.

Mass

A value for the amount of mass released instantaneously at the source point, in units of mass.

Dispersion time (optional)

A value representing the time horizon for dispersion of the solute, in units of time.

The time must be less than or equal to the maximum time in the track file. If the requested time exceeds the available time from the track file, the tool is aborted. The default time is the latest time (corresponding to the terminal point) in the track file.

Longitudinal dispersivity (optional)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

5.    Mass الكتلة

A value for the amount of mass released instantaneously at the source point, in units of mass.

قيمة مقدار الكتلة التي يتم إطلاقها على الفور عند نقطة المصدر ، بوحدات الكتلة.

Dispersion time (optional)

A value representing the time horizon for dispersion of the solute, in units of time.

The time must be less than or equal to the maximum time in the track file. If the requested time exceeds the available time from the track file, the tool is aborted. The default time is the latest time (corresponding to the terminal point) in the track file.

Longitudinal dispersivity (optional)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

6.    Dispersion time (optional) وقت التشتت (اختياري)

A value representing the time horizon for dispersion of the solute, in units of time.

The time must be less than or equal to the maximum time in the track file. If the requested time exceeds the available time from the track file, the tool is aborted. The default time is the latest time (corresponding to the terminal point) in the track file.

قيمة تمثل الأفق الزمني لتشتت المادة المذابة بوحدات زمنية.

يجب أن يكون الوقت أقل من أو يساوي الحد الأقصى للوقت في ملف المسار. إذا تجاوز الوقت المطلوب الوقت المتاح من ملف المسار ، يتم إحباط الأداة. الوقت الافتراضي هو آخر مرة (المقابلة للنقطة النهائية) في ملف المسار.

Longitudinal dispersivity (optional)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

7.    Longitudinal dispersivity (optional) التشتت الطولي (اختياري)

A value representing the dispersivity parallel to the flow direction.

For details on how the default value is determined, and how it relates to the scale of the study, see the How Porous Puff works section in the documentation.

قيمة تمثل التشتت الموازي لاتجاه التدفق.

للحصول على تفاصيل حول كيفية تحديد القيمة الافتراضية ، ومدى ارتباطها بمقياس الدراسة ، راجع قسم كيفية عمل المسامات المسامية في الوثائق.

Dispersivity ratio (optional)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

8.    Dispersivity ratio (optional) نسبة التشتت (اختياري)

A value representing the ratio of longitudinal dispersivity over transverse dispersivity.

Transverse dispersivity is perpendicular to the flow direction in the same horizontal plane. The default value is three.

قيمة تمثل نسبة التشتت الطولي على التشتت العرضي.

التشتت المستعرض عمودي على اتجاه التدفق في نفس المستوى الأفقي. القيمة الافتراضية هي ثلاثة.

Retardation factor (optional)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

9.    Retardation factor (optional) عامل التخلف (اختياري)

A dimensionless value representing the retardation of the solute in the aquifer.

Retardation varies between one and infinity, with one corresponding to no retardation. The default value is one.

قيمة بلا أبعاد تمثل تأخر المذاب في طبقة المياه الجوفية.

يختلف التخلف بين واحد وما لا نهاية ، مع واحد يقابل عدم وجود تخلف. القيمة الافتراضية هي واحدة.

Decay coefficient (optional)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

10. Decay coefficient (optional) معامل الاضمحلال (اختياري)

Decay coefficient for solutes undergoing first-order exponential decay (for example, radionuclides) in units of inverse time.

The default is zero, corresponding to no decay.

معامل الانحلال للمواد المذابة التي تخضع للانحلال الأسي من الدرجة الأولى (على سبيل المثال ، النويدات المشعة) بوحدات الزمن العكسي.

القيمة الافتراضية هي صفر ، والتي تقابل عدم حدوث تدهور.

 اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:


مجموعة على الفيس بوك ArcGIS Pro من هنا.
مجموعة على الفيس بوك GIS for WE - ArcGIS Pro من هنا.
صفحة الفيس بوك GIS for WE من هنا.

 

GIS for WE

تعليقات

التنقل السريع
    >