ACos, ACosH, ASin, ASinH, ATan, ATanH,
Cos, CosH, Sin, SinH, Tan, TanH Tools
ArcMap
ArcGIS
How to use Tools Trigonometric
Toolset in Arc Toolbox??
كيفية استخدام أدوات مجموعة أدوات حساب المثلثات ؟؟
Path to access the Toolsمسار الوصول الى الأدوات
:
Trigonometric Toolset, Math Toolset,
Spatial Analyst Tools Toolbox
شرح واجهات مجموعة من أدوات حساب
المثلثات (Trigonometric Tools):
ACos
Calculates the inverse cosine of cells in a raster.
لحساب جيب التمام العكسي
للخلايا في خطوط المسح.
ACosH
Calculates the inverse
hyperbolic cosine of cells in a raster.Input raster or constant value
لحساب جيب التمام العكسي للقطع الزائد للخلايا في
خط نقطي.
ASin
Calculates the inverse
sine of cells in a raster.
لحساب الجيب العكسي للخلايا في خطوط المسح.
Input raster or constant value
The input for which to calculate the inverse sine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the inverse sine of the input values.
ASinH
Calculates the inverse
hyperbolic sine of cells in a raster.
لحساب الجيب الزائدي العكسي للخلايا في خط نقطي.
Input raster or constant value
The input for which to calculate the inverse hyperbolic sine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the inverse hyperbolic sine of the input values.
ATan
Calculates the inverse
tangent of cells in a raster.
تحسب الظل المعكوس للخلايا في خطوط المسح.
ATanH
Calculates the inverse
hyperbolic tangent of cells in a raster.
لحساب الظل العكسي للقطع الزائد للخلايا في خط
نقطي.
Cos
Calculates the cosine of
cells in a raster.
لحساب جيب التمام للخلايا في خطوط نقطية.
CosH
Calculates the
hyperbolic cosine of cells in a raster.
لحساب جيب التمام الزائدي للخلايا في خطوط نقطية.
Sin
Calculates the sine of
cells in a raster.
تحسب جيب الزاوية للخلايا في خطوط المسح.
SinH
Calculates the
hyperbolic sine of cells in a raster.
لحساب الجيب الزائدي للخلايا في خطوط المسح.
Tan
Calculates the tangent
of cells in a raster.
تحسب ظل الخلايا في خطوط المسح.
TanH
Calculates the
hyperbolic tangent of cells in a raster.Input raster or constant value
تحسب الظل الزائدي للخلايا في خط نقطي.
The input to calculate the hyperbolic tangent values for.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the hyperbolic tangent of the input values.
Input raster or constant value
The input for which to calculate the tangent values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the tangent of the input values.
Input raster or constant value
The input for which to calculate the hyperbolic sine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the hyperbolic sine of the input values.
Input raster or constant value
The input for which to calculate the sine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the sine of the input values.
Input raster or constant value
The input for which to calculate the hyperbolic cosine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the hyperbolic cosine of the input values.
Input raster or constant value
The input for which to calculate the cosine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the cosine of the input values.
Input raster or constant value
The input for which to calculate the inverse hyperbolic tangent values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the inverse hyperbolic tangent of the input values.
Input raster or constant value
The input for which to calculate the inverse tangent values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the inverse tangent of the input values.
The input for which to calculate the inverse hyperbolic cosine values.
In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
Output raster
The output raster.
The values are the inverse hyperbolic cosine of the input values.
1. Input
raster or constant value
2. The input for which to calculate the inverse cosine values.
3. In order to use a number as an input for this parameter, the cell size and
extent must first be set in the environment.
4. Output
raster
5. The output raster.
6. The values are the inverse cosine of the input values.
1. Input raster or constant value أدخل
البيانات النقطية او قيمة ثابتة
The first input to use
in this operation.
A number can be used as
an input for this parameter, provided a raster is specified for the other
parameter. To be able to specify a number for both inputs, the cell size and
extent must first be set in the environment.
الإدخال الأول المطلوب استخدامه في هذه العملية .
يمكن استخدام رقم كمدخل لهذه المعلمة ، بشرط تحديد
نقطية للمعلمة الأخرى. لتتمكن من تحديد رقم لكل من المدخلات ، يجب أولاً تعيين حجم
الخلية ومداها في البيئة.
Input raster or constant value 2
The second input to use in this bitwise operation.
A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
Output raster
The output raster.
The cell values are the result of a Bitwise eXclusive Or operation on the
two inputs.
2.
Output raster البيانات النقطية
المخرجة
The output raster.
The cell values are the
result of two inputs.
النقطية المخرجة.
قيم الخلية هي نتيجة عملية أو عملية حصرية على المدخلين.
شرح واجهة الأداة ATan2
ATan2
Calculates the inverse tangent (based on x,y) of cells in a
raster.
لحساب المماس العكسي
(بناءً على س ، ص) للخلايا في البيانات النقطية.
1.
Input raster or constant value 1 أدخل
البيانات النقطية او القيمة الثابتة 1
The input that specifies the numerator, or y value, to use when calculating
the inverse tangent.
A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
Input raster or constant
value 2
The input that specifies the denominator, or x value, to use when calculating
the inverse tangent.
A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
Output raster
The output raster.
الإدخال الذي يحدد البسط ، أو قيمة y ،
لاستخدامه عند حساب المماس المعكوس.
يمكن استخدام رقم كمدخل لهذه المعلمة ، بشرط تحديد
نقطية للمعلمة الأخرى. لتتمكن من تحديد رقم لكل من المدخلات ، يجب أولاً تعيين حجم
الخلية ومداها في البيئة.
Input raster or constant value 2
The input that specifies the denominator, or x value, to use when
calculating the inverse tangent.
A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
Output raster
The output raster.
The values are the inverse tangent angle of the input values.
2.
Input raster or constant value 2 أدخل
البيانات النقطية او القيمة الثابتة 2
The input that specifies
the denominator, or x value, to use when calculating the inverse tangent.
A number can be used as
an input for this parameter, provided a raster is specified for the other
parameter. To be able to specify a number for both inputs, the cell size and
extent must first be set in the environment.Output raster
الإدخال الذي يحدد المقام ، أو قيمة x ،
لاستخدامها عند حساب المماس العكسي.
يمكن استخدام رقم كمدخل لهذه المعلمة ، بشرط تحديد
نقطية للمعلمة الأخرى. لتتمكن من تحديد رقم لكل من المدخلات ، يجب أولاً تعيين حجم
الخلية ومداها في البيئة.The output raster.The values are the
inverse tangent angle of the input values.
2. Input
raster or constant value 1
3. The input that specifies the numerator, or y value, to use when calculating
the inverse tangent.
4. A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
5. Input
raster or constant value 2
6. The input that specifies the denominator, or x value, to use when
calculating the inverse tangent.
7. A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
8. Output
raster
9. The output raster.
10. The values are the inverse tangent angle of the input values.
11. Input
raster or constant value 1
12. The input that specifies the numerator, or y value, to use when
calculating the inverse tangent.
13. A number can be used as an input for this parameter, provided a raster is
specified for the other parameter. To be able to specify a number for both
inputs, the cell size and extent must first be set in the environment.
14. Input
raster or constant value 2
15. The input that specifies the denominator, or x value, to use when
calculating the inverse tangent.
16. A number can be used as an input for this parameter, provided a raster is specified
for the other parameter. To be able to specify a number for both inputs, the
cell size and extent must first be set in the environment.
17. Output
raster
18. The output raster.
19. The values are the inverse tangent angle of the input values.
Output raster
The output raster.
The cell values are the result of a Bitwise Not operation on the input.
3.
Output raster البيانات النقطية
المخرجة
The output raster.
The cell values are the
result of the input.
النقطية المخرجة.
قيم الخلية هي نتيجة عملية الإدخال.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق