Overlay
Route Events Tool
أداة
تراكب أحداث الطريق
ArcMap ArcGIS
How to use Overlay Route
Events Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة تراكب أحداث الطريق ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Overlay
Route Events Tool, Linear Referencing Tools Toolbox
Overlay Route Events
Overlays two event
tables to create an output event table that represents the union or
intersection of the input.
يتراكب جدولي أحداث لإنشاء جدول حدث مخرجات يمثل
اتحاد أو تقاطع الإدخال.
1.
Input Event Table أدخل جدول الحدث
The input event table.
جدول حدث الإدخال.
Input
Event Table Properties
Parameter consisting of the route location fields and the type of events
in the input event table.
· Route Identifier Field—The field containing values that indicate the route
on which each event is located. This field can be numeric or character.
· Event Type—The type of events in the input event table (POINT or LINE).
o POINT—Point events occur at a precise location along a route. Only a
from-measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is POINT or LINE. Note when the
Event Type is POINT, the label for this parameter becomes Measure Field.
· To-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is LINE.
Overlay
Event Table
The overlay event table.
Overlay
Event Table Properties
Parameter consisting of the route location fields and the type of events
in the overlay event table.
Route Identifier Field—The field containing values that indicate which
route each event is along. This field can be numeric or character.
Event Type—The type of events in the overlay event table (POINT or LINE).
· POINT—Point events occur at a precise location along a route. Only a
from-measure field must be specified.
· LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
From-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is POINT or LINE. Note when the
Event Type is POINT the label for this parameter becomes "Measure
Field".
To-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is LINE.
Type of
Overlay
The type of overlay to be performed.
· INTERSECT—Writes only overlapping events to the output event table. This
is the default.
· UNION—Writes all events to the output table. Linear events are split at
their intersections.
Output
Event Table
The table to be created.
Output
Event Table Properties
Parameter consisting of the route location fields and the type of events
that will be written to the output event table.
· Route Identifier Field—The field that will contain values that indicate
the route on which each event is located.
· Event Type—The type of events the output event table will contain (POINT
or LINE).
o POINT—Point events occur at a precise location along a route. Only a
single measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field that will contain measure values. Required when
the event type is POINT or LINE. Note when the Event Type is POINT, the label
for this parameter becomes Measure Field.
· To-Measure Field—A field that will contain measure values. Required when
the event type is LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
2.
Input Event Table Properties خصائص
جدول حدث الإدخال
Parameter consisting of
the route location fields and the type of events in the input event table.
·
Route Identifier Field—The field containing values that indicate
the route on which each event is located. This field can be numeric or
character.
·
Event Type—The type of events in the input event table (POINT or
LINE).
oPOINT—Point events occur at a precise location
along a route. Only a from-measure field must be specified.
oLINE—Line events define a portion of a route.
Both from- and to-measure fields must be specified.
·
From-Measure Field—A field containing measure values. This field
must be numeric and is required when the event type is POINT or LINE. Note when
the Event Type is POINT, the label for this parameter becomes Measure Field.
·
To-Measure Field—A field containing measure values. This field
must be numeric and is required when the event type is LINE.
تتكون المعلمة من حقول موقع الطريق ونوع الأحداث
في جدول حدث الإدخال.
• حقل معرف المسار -
الحقل الذي يحتوي على القيم التي تشير إلى المسار الذي يقع عليه كل حدث. يمكن أن
يكون هذا الحقل رقميًا أو محرفًا.
• نوع الحدث - نوع
الأحداث في جدول حدث الإدخال (POINT أو LINE).
POINT -
تحدث أحداث النقطة في موقع محدد على طول الطريق. يجب تحديد حقل من مقياس فقط.
LINE -
تحدد أحداث الخط جزءًا من المسار. يجب تحديد حقلي "من" و
"إلى" قياس.
• From-Measure Field - حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل رقميًا ويكون
مطلوبًا عندما يكون نوع الحدث هو POINT أو LINE.
ملاحظة عندما يكون "نوع الحدث" هو POINT ، فإن
تسمية هذه المعلمة تصبح "حقل قياس".
• حقل القياس - حقل يحتوي
على قيم القياس. يجب أن يكون هذا الحقل رقميًا ويكون مطلوبًا عندما يكون نوع الحدث
LINE.
Overlay
Event Table
The overlay event table.
Overlay
Event Table Properties
Parameter consisting of the route location fields and the type of events
in the overlay event table.
Route Identifier Field—The field containing values that indicate which
route each event is along. This field can be numeric or character.
Event Type—The type of events in the overlay event table (POINT or LINE).
· POINT—Point events occur at a precise location along a route. Only a
from-measure field must be specified.
· LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
From-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is POINT or LINE. Note when the
Event Type is POINT the label for this parameter becomes "Measure
Field".
To-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is LINE.
Type of
Overlay
The type of overlay to be performed.
· INTERSECT—Writes only overlapping events to the output event table. This
is the default.
· UNION—Writes all events to the output table. Linear events are split at
their intersections.
Output
Event Table
The table to be created.
Output
Event Table Properties
Parameter consisting of the route location fields and the type of events
that will be written to the output event table.
· Route Identifier Field—The field that will contain values that indicate
the route on which each event is located.
· Event Type—The type of events the output event table will contain (POINT
or LINE).
o POINT—Point events occur at a precise location along a route. Only a
single measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field that will contain measure values. Required when
the event type is POINT or LINE. Note when the Event Type is POINT, the label
for this parameter becomes Measure Field.
· To-Measure Field—A field that will contain measure values. Required when
the event type is LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
3.
Overlay Event Table تراكب جدول
الحدث
The overlay event table.
جدول حدث التراكب.
Overlay
Event Table Properties
Parameter consisting of the route location fields and the type of events
in the overlay event table.
Route Identifier Field—The field containing values that indicate which
route each event is along. This field can be numeric or character.
Event Type—The type of events in the overlay event table (POINT or LINE).
· POINT—Point events occur at a precise location along a route. Only a
from-measure field must be specified.
· LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
From-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is POINT or LINE. Note when the
Event Type is POINT the label for this parameter becomes "Measure
Field".
To-Measure Field—A field containing measure values. This field must be
numeric and is required when the event type is LINE.
Type of
Overlay
The type of overlay to be performed.
· INTERSECT—Writes only overlapping events to the output event table. This
is the default.
· UNION—Writes all events to the output table. Linear events are split at
their intersections.
Output
Event Table
The table to be created.
Output
Event Table Properties
Parameter consisting of the route location fields and the type of events
that will be written to the output event table.
· Route Identifier Field—The field that will contain values that indicate
the route on which each event is located.
· Event Type—The type of events the output event table will contain (POINT
or LINE).
o POINT—Point events occur at a precise location along a route. Only a
single measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field that will contain measure values. Required when
the event type is POINT or LINE. Note when the Event Type is POINT, the label
for this parameter becomes Measure Field.
· To-Measure Field—A field that will contain measure values. Required when
the event type is LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build index
(optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
4.
Overlay Event Table Properties تراكب
خصائص جدول الأحداث
Parameter consisting of
the route location fields and the type of events in the overlay event table.
Route Identifier
Field—The field containing values that indicate which route each event is
along. This field can be numeric or character.
Event Type—The type of
events in the overlay event table (POINT or LINE).
·
POINT—Point events occur at a precise location along a route. Only
a from-measure field must be specified.
·
LINE—Line events define a portion of a route. Both from- and
to-measure fields must be specified.
From-Measure Field—A
field containing measure values. This field must be numeric and is required
when the event type is POINT or LINE. Note when the Event Type is POINT the
label for this parameter becomes "Measure Field".
To-Measure Field—A field
containing measure values. This field must be numeric and is required when the
event type is LINE.
تتكون المعلمة من حقول موقع المسار ونوع الأحداث
في جدول أحداث التراكب.
حقل معرف المسار — الحقل الذي يحتوي على القيم
التي تشير إلى المسار الذي يمر به كل حدث. يمكن أن يكون هذا الحقل رقميًا أو
محرفًا.
نوع الحدث — نوع الأحداث في جدول حدث التراكب (POINT أو LINE).
• POINT -
تحدث أحداث النقطة في موقع محدد على طول الطريق. يجب تحديد حقل من مقياس فقط.
• LINE - تحدد أحداث الخط جزءًا من المسار. يجب تحديد حقلي "من" و
"إلى" قياس.
From-Measure Field - حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل رقميًا ويكون
مطلوبًا عندما يكون نوع الحدث هو POINT أو LINE. لاحظ
عندما يكون "نوع الحدث" هو POINT ، فإن
تسمية هذه المعلمة تصبح "حقل القياس".
To-Measure Field - حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل رقميًا ويكون
مطلوبًا عندما يكون نوع الحدث LINE.
Type of
Overlay
The type of overlay to be performed.
· INTERSECT—Writes only overlapping events to the output event table. This
is the default.
· UNION—Writes all events to the output table. Linear events are split at
their intersections.
Output
Event Table
The table to be created.
Output
Event Table Properties
Parameter consisting of the route location fields and the type of events
that will be written to the output event table.
· Route Identifier Field—The field that will contain values that indicate
the route on which each event is located.
· Event Type—The type of events the output event table will contain (POINT
or LINE).
o POINT—Point events occur at a precise location along a route. Only a
single measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field that will contain measure values. Required when
the event type is POINT or LINE. Note when the Event Type is POINT, the label
for this parameter becomes Measure Field.
· To-Measure Field—A field that will contain measure values. Required when
the event type is LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build
index (optional)
Specifies whether an attribute index will be created for the route identifier
field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
5.
Type of Overlay نوع التراكب
The type of overlay to
be performed.
·
INTERSECT—Writes only overlapping events to the output event
table. This is the default.
·
UNION—Writes all events to the output table. Linear events are
split at their intersections.
نوع التراكب الذي سيتم تنفيذه.
• INTERSECT - يكتب الأحداث المتداخلة فقط في جدول حدث الإخراج. هذا هو
الافتراضي.
• UNION -
يكتب جميع الأحداث إلى جدول الإخراج. يتم تقسيم الأحداث الخطية عند تقاطعاتها.
Output
Event Table
The table to be created.
Output
Event Table Properties
Parameter consisting of the route location fields and the type of events
that will be written to the output event table.
· Route Identifier Field—The field that will contain values that indicate
the route on which each event is located.
· Event Type—The type of events the output event table will contain (POINT
or LINE).
o POINT—Point events occur at a precise location along a route. Only a
single measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field that will contain measure values. Required when
the event type is POINT or LINE. Note when the Event Type is POINT, the label
for this parameter becomes Measure Field.
· To-Measure Field—A field that will contain measure values. Required when
the event type is LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build index
(optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
6.
Output Event Table مخرج جدول الحدث
The table to be created.
الجدول المراد إنشاؤه.
Output
Event Table Properties
Parameter consisting of the route location fields and the type of events
that will be written to the output event table.
· Route Identifier Field—The field that will contain values that indicate
the route on which each event is located.
· Event Type—The type of events the output event table will contain (POINT
or LINE).
o POINT—Point events occur at a precise location along a route. Only a
single measure field must be specified.
o LINE—Line events define a portion of a route. Both from- and to-measure
fields must be specified.
· From-Measure Field—A field that will contain measure values. Required when
the event type is POINT or LINE. Note when the Event Type is POINT, the label
for this parameter becomes Measure Field.
· To-Measure Field—A field that will contain measure values. Required when
the event type is LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
7.
Output Event Table Properties خصائص
جدول حدث الإخراج
Parameter consisting of
the route location fields and the type of events that will be written to the
output event table.
·
Route Identifier Field—The field that will contain values that
indicate the route on which each event is located.
·
Event Type—The type of events the output event table will contain
(POINT or LINE).
oPOINT—Point events occur at a precise location
along a route. Only a single measure field must be specified.
oLINE—Line events define a portion of a route.
Both from- and to-measure fields must be specified.
·
From-Measure Field—A field that will contain measure values.
Required when the event type is POINT or LINE. Note when the Event Type is
POINT, the label for this parameter becomes Measure Field.
·
To-Measure Field—A field that will contain measure values.
Required when the event type is LINE.
تتكون المعلمة من حقول موقع الطريق ونوع الأحداث
التي ستتم كتابتها في جدول حدث الإخراج.
• حقل معرّف المسار -
الحقل الذي سيحتوي على القيم التي تشير إلى المسار الذي يقع عليه كل حدث.
• نوع الحدث - نوع
الأحداث التي سيحتويها جدول الحدث الناتج (POINT أو LINE).
o POINT - تحدث أحداث النقطة في موقع محدد على طول الطريق. يجب تحديد حقل
قياس واحد فقط.
o LINE -
تحدد أحداث الخط جزءًا من المسار. يجب تحديد حقلي "من" و
"إلى" قياس.
• From-Measure Field - حقل يحتوي على قيم القياس. مطلوبة عندما يكون نوع الحدث هو POINT أو LINE.
ملاحظة عندما يكون "نوع الحدث" هو POINT ، فإن
تسمية هذه المعلمة تصبح "حقل قياس".
• حقل القياس - حقل يحتوي
على قيم القياس. مطلوبة عندما يكون نوع الحدث هو LINE.
Keep zero
length line events (optional)
Specifies whether to keep zero length line events in the output table.
This parameter is only valid when the output event type is LINE.
· Checked—Keep zero length line events. This is the default.
· Unchecked—Do not keep zero length line events.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
8.
Keep zero length line events (optional) الاحتفاظ بأحداث خط الطول الصفري (اختياري)
Specifies whether to
keep zero length line events in the output table. This parameter is only valid
when the output event type is LINE.
·
Checked—Keep zero length line events. This is the default.
·
Unchecked—Do not keep zero length line events.
يحدد ما إذا كان سيتم الاحتفاظ بأحداث السطر
الصفرية في جدول الإخراج أم لا. هذه المعلمة صالحة فقط عندما يكون نوع حدث الإخراج
هو LINE.
• تم التحديد - احتفظ
بأحداث السطر الصفرية. هذا هو الافتراضي.
• لم يتم التحقق منه — لا
تحتفظ بأحداث السطر الصفري.
Include
all fields from input (optional)
Specifies whether all the fields from the input and overlay event tables
will be written to the output event table.
· Checked—Includes all the fields from the input tables in the output table.
This is the default.
· Unchecked—Does not include all the fields from the input tables in the
output table. Only the ObjectID and the route location fields are kept.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
9.
Include all fields from input (optional) قم بتضمين جميع الحقول من الإدخال (اختياري)
Specifies whether all
the fields from the input and overlay event tables will be written to the
output event table.
·
Checked—Includes all the fields from the input tables in the
output table. This is the default.
·
Unchecked—Does not include all the fields from the input tables in
the output table. Only the ObjectID and the route location fields are kept.
يحدد ما إذا كانت كافة الحقول من جداول أحداث
الإدخال والتراكب ستتم كتابتها في جدول حدث الإخراج.
• تم التحديد - يشمل جميع
الحقول من جداول الإدخال في جدول الإخراج. هذا هو الافتراضي.
• غير محدد - لا يشمل
جميع الحقول من جداول الإدخال في جدول الإخراج. يتم الاحتفاظ فقط بمعرف الكائن
وحقول موقع الطريق.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output event table.
· Checked—Creates an attribute index. This is the default.
· Unchecked—Does not create an attribute index.
10.
Build index (optional) بناء الفهرس
(اختياري)
Specifies whether an
attribute index will be created for the route identifier field that is written
to the output event table.
·
Checked—Creates an attribute index. This is the default.
·
Unchecked—Does not create an attribute index.
يحدد ما إذا كان سيتم إنشاء فهرس السمات لحقل معرف
الطريق الذي تتم كتابته في جدول حدث الإخراج.
• تم التحديد - يقوم
بإنشاء فهرس سمة. هذا هو الافتراضي.
• لم يتم تحديده - لا
يُنشئ فهرس سمة.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق