موقع GIS for WE نظم المعلومات الجغرافية (GIS) وبرامج ArcGIS

Make Route Event Layer Tool

أداة إنشاء طبقة حدث الطرق

ArcMap ArcGIS

How to use Make Route Event Layer Tool in Arc Toolbox ArcMap ArcGIS??

كيفية استخدام أداة إنشاء طبقة حدث الطرق ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Make Route Event Layer Tool, Linear Referencing Tools Toolbox

 

Make Route Event Layer

Creates a temporary feature layer using routes and route events.

When the temporary layer is used (displayed on a map, or used by another geoprocessing tool), dynamic segmentation is performed.

يُنشئ طبقة معالم مؤقتة باستخدام أحداث الطرق والمسارات.

عند استخدام الطبقة المؤقتة (المعروضة على الخريطة ، أو استخدامها بواسطة أداة معالجة جغرافية أخرى) ، يتم تنفيذ التجزئة الديناميكية.

Input Route Features

The route features upon which events will be located.

Route Identifier Field

The field containing values that uniquely identify each route.

Input Event Table

The table whose rows will be located along routes.

Event Table Properties

Parameter consisting of the route location fields and the type of events in the input event table.

·      Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character.

·      Event Type—The type of events in the input event table (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.

Layer Name or Table View

The layer to be created. This layer is stored in memory, so a path is not necessary.

Offset Field (optional)

The field containing values used to offset events from their underlying route. This field must be numeric.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

1.    Input Route Features أدخل معالم الطرق

The route features upon which events will be located.

ملامح الطرق التي سيتم تحديد الأحداث عليها.

Route Identifier Field

The field containing values that uniquely identify each route.

Input Event Table

The table whose rows will be located along routes.

Event Table Properties

Parameter consisting of the route location fields and the type of events in the input event table.

·      Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character.

·      Event Type—The type of events in the input event table (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.

Layer Name or Table View

The layer to be created. This layer is stored in memory, so a path is not necessary.

Offset Field (optional)

The field containing values used to offset events from their underlying route. This field must be numeric.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

2.    Route Identifier Field حقل معرف الطريق

The field containing values that uniquely identify each route.

الحقل الذي يحتوي على القيم التي تحدد كل طريق بشكل فريد.

Input Event Table

The table whose rows will be located along routes.

Event Table Properties

Parameter consisting of the route location fields and the type of events in the input event table.

·      Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character.

·      Event Type—The type of events in the input event table (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.

Layer Name or Table View

The layer to be created. This layer is stored in memory, so a path is not necessary.

Offset Field (optional)

The field containing values used to offset events from their underlying route. This field must be numeric.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

3.    Input Event Table أدخل جدول الحدث

The table whose rows will be located along routes.

الجدول الذي سيتم وضع صفوفه على طول الطرق.

Event Table Properties

Parameter consisting of the route location fields and the type of events in the input event table.

·      Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character.

·      Event Type—The type of events in the input event table (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.

Layer Name or Table View

The layer to be created. This layer is stored in memory, so a path is not necessary.

Offset Field (optional)

The field containing values used to offset events from their underlying route. This field must be numeric.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

4.    Event Table Properties خصائص جدول الأحداث

Parameter consisting of the route location fields and the type of events in the input event table.

· Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character.

· Event Type—The type of events in the input event table (POINT or LINE).

oPOINT—Point events occur at a precise location along a route. Only a from-measure field must be specified.

oLINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

· From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

· To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.

تتكون المعلمة من حقول موقع الطريق ونوع الأحداث في جدول حدث الإدخال.

• حقل معرف المسار - الحقل الذي يحتوي على القيم التي تشير إلى المسار الذي يقع عليه كل حدث. يمكن أن يكون هذا الحقل رقميًا أو محرفًا.

• نوع الحدث - نوع الأحداث في جدول حدث الإدخال (POINT أو LINE).

POINT - تحدث أحداث النقطة في موقع محدد على طول الطريق. يجب تحديد حقل من مقياس فقط.

LINE - تحدد أحداث الخط جزءًا من المسار. يجب تحديد حقلي "من" و "إلى" قياس.

• From-Measure Field - حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل رقميًا ويكون مطلوبًا عندما يكون نوع الحدث هو POINT أو LINE. ملاحظة عندما يكون "نوع الحدث" هو POINT ، فإن تسمية هذه المعلمة تصبح "حقل قياس".

• حقل القياس - حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل رقميًا ويكون مطلوبًا عندما يكون نوع الحدث LINE.

Layer Name or Table View

The layer to be created. This layer is stored in memory, so a path is not necessary.

Offset Field (optional)

The field containing values used to offset events from their underlying route. This field must be numeric.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

5.    Layer Name or Table View اسم الطبقة أو عرض الجدول

The layer to be created. This layer is stored in memory, so a path is not necessary.

الطبقة التي سيتم إنشاؤها. يتم تخزين هذه الطبقة في الذاكرة ، لذا فإن المسار ليس ضروريًا.

Offset Field (optional)

The field containing values used to offset events from their underlying route. This field must be numeric.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

6.    Offset Field (optional) حقل الإزاحة (اختياري)

The field containing values used to offset events from their underlying route. This field must be numeric.

الحقل الذي يحتوي على القيم المستخدمة لموازنة الأحداث من مسارها الأساسي. يجب أن يكون هذا الحقل رقميًا.

Generate a field for locating errors (optional)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

·      Unchecked—Do not add a field to store locating errors. This is the default.

·      Checked—Add a field to store locating errors.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

7.    Generate a field for locating errors (optional) إنشاء حقل لتحديد موقع الأخطاء (اختياري)

Specifies whether a field named LOC_ERROR will be added to the temporary layer that is created.

· Unchecked—Do not add a field to store locating errors. This is the default.

· Checked—Add a field to store locating errors.

يحدد ما إذا كان سيتم إضافة حقل يسمى LOC_ERROR إلى الطبقة المؤقتة التي تم إنشاؤها.

• غير محدد — لا تقم بإضافة حقل لتخزين أخطاء تحديد الموقع. هذا هو الافتراضي.

• تم التحديد — أضف حقلاً لتخزين أخطاء تحديد الموقع.

Generate an angle field (optional)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

·      Unchecked—Do not add a field to store locating angles. This is the default.

·      Checked—Add a field to store locating angles.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

8.    Generate an angle field (optional) إنشاء حقل زاوية (اختياري)

Specifies whether a field named LOC_ANGLE will be added to the temporary layer that is created. This parameter is only valid when the event type is POINT.

· Unchecked—Do not add a field to store locating angles. This is the default.

· Checked—Add a field to store locating angles.

يحدد ما إذا كان سيتم إضافة الحقل المسمى LOC_ANGLE إلى الطبقة المؤقتة التي تم إنشاؤها. هذه المعلمة صالحة فقط عندما يكون نوع الحدث هو POINT.

• لم يتم تحديده - لا تقم بإضافة حقل لتخزين زوايا تحديد الموقع. هذا هو الافتراضي.

• تم التحديد — أضف حقلاً لتخزين زوايا تحديد الموقع.

Calculated Angle Type (optional)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

·      NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

·      TANGENT—The tangent angle will be calculated.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

·      Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

·      Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

·      Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

·      Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

·      Unchecked—Point events will be treated as point features. This is the default.

·      Checked—Point events will be treated as multipoint features.

9.    Calculated Angle Type (optional) نوع الزاوية المحسوبة (اختياري)

Specifies the type of locating angle that will be calculated. This parameter is only valid if Generate an angle field is checked.

· NORMAL—The normal (perpendicular) angle will be calculated. This is the default.

· TANGENT—The tangent angle will be calculated.

يحدد نوع زاوية التحديد التي سيتم حسابها. هذه المعلمة صالحة فقط إذا تم تحديد إنشاء حقل زاوية.

• عادي - سيتم حساب الزاوية العادية (العمودية). هذا هو الافتراضي.

• الظل - سيتم حساب زاوية الظل.

Write the complement of the angle to the angle field (optional)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

· Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

· Checked—Write the complement of the angle.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

· Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

· Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

· Unchecked—Point events will be treated as point features. This is the default.

· Checked—Point events will be treated as multipoint features.

10. Write the complement of the angle to the angle field (optional) اكتب تكملة الزاوية لحقل الزاوية (اختياري)

Specifies whether the complement of the locating angle will be calculated. This parameter is only valid if Generate an angle field is checked.

· Unchecked—Do not write the complement of the angle. Write only the calculated angle. This is the default.

· Checked—Write the complement of the angle.

يحدد ما إذا كان سيتم حساب تكملة زاوية التحديد أم لا. هذه المعلمة صالحة فقط إذا تم تحديد إنشاء حقل زاوية.

• بدون علامة - لا تكتب تكملة الزاوية. اكتب الزاوية المحسوبة فقط. هذا هو الافتراضي.

• تم التحقق منه — اكتب مكمل الزاوية.

Events with a positive offset will be placed to the right of the routes (optional)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

· Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

· Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

· Unchecked—Point events will be treated as point features. This is the default.

· Checked—Point events will be treated as multipoint features.

11. Events with a positive offset will be placed to the right of the routes (optional) سيتم وضع الأحداث ذات الإزاحة الإيجابية على يمين المسارات (اختياري)

Specifies the side on which the route events with a positive offset are displayed. This parameter is only valid if an offset field has been specified.

· Unchecked—Events with a positive offset will be displayed to the left of the route. The side of the route is determined by the measures and not necessarily the digitized direction. This is the default.

· Checked—Events with a positive offset will be displayed to the right of the route. The side of the route is determined by the digitized direction.

يحدد الجانب الذي تظهر فيه أحداث المسار بإزاحة موجبة. هذه المعلمة صالحة فقط إذا تم تحديد حقل الإزاحة.

• غير محدد - سيتم عرض الأحداث ذات الإزاحة الإيجابية على يسار المسار. يتم تحديد جانب المسار من خلال المقاييس وليس بالضرورة الاتجاه الرقمي. هذا هو الافتراضي.

• تم التحديد - سيتم عرض الأحداث ذات الإزاحة الإيجابية على يمين المسار. يتم تحديد جانب الطريق من خلال الاتجاه الرقمي.

Point events will be generated as multipoint features (optional)

Specifies whether point events will be treated as point features or multipoint features.

· Unchecked—Point events will be treated as point features. This is the default.

· Checked—Point events will be treated as multipoint features.

12. Point events will be generated as multipoint features (optional) سيتم إنشاء أحداث النقاط كميزات متعددة النقاط (اختياري)

Specifies whether point events will be treated as point features or multipoint features.

· Unchecked—Point events will be treated as point features. This is the default.

· Checked—Point events will be treated as multipoint features.

يحدد ما إذا كان سيتم التعامل مع أحداث النقطة على أنها معالم نقطية أو معالم متعددة النقاط.

• غير محدد - سيتم التعامل مع أحداث النقاط على أنها معالم نقطية. هذا هو الافتراضي.

• تم التحديد - ستتم معاملة أحداث النقاط كميزات متعددة النقاط.

 اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:

مجموعة على الفيس بوك ArcGIS Pro من هنا.

مجموعة على الفيس بوك GIS for WE - ArcGIS Pro من هنا.

صفحة الفيس بوك GIS for WE من هنا.