Create
Routes Tool
أداة
إنشاء طرق
ArcMap ArcGIS
How to use Create Routes Tool
in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة إنشاء طرق
؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Create
Routes Tool, Linear Referencing Tools Toolbox
Create Routes
Creates routes from
existing lines. The input line features that share a common identifier are
merged to create a single route.
ينشئ طرق من الخطوط الموجودة. يتم دمج ميزات خط
الإدخال التي تشترك في معرف مشترك لإنشاء طريق واحد.
1.
Input Line Features ميزات خط
الإدخال
The features from which
routes will be createdRoute
Identifier Field
الميزات التي سيتم إنشاء الطرق منها
· The field containing values that uniquely identify each route.
Output
Route Feature Class
The feature class to be created. It can be a shapefile or a geodatabase
feature class.
Measure
Source
Specifies how route measures will be obtained.
· LENGTH—The geometric length of the input features will be used to
accumulate the measures. This is the default.
· ONE_FIELD—The value stored in a single field will be used to accumulate
the measures.
· TWO_FIELDS—The values stored in both from- and to- measure fields will be
used to set the measures.
From-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is ONE_FIELD or TWO_FIELDS.
To-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is TWO_FIELDS.
Coordinate
Priority (optional)
The position from which measures will be accumulated for each output
route. This parameter is ignored when the measure source is TWO_FIELDS.
· UPPER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper left corner. This is the default.
· LOWER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower left corner.
· UPPER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper right corner.
· LOWER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower right corner.
Measure
Factor (optional)
A value multiplied by the measure length of each input line before they
are merged to create route measures. The default is 1.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
· Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
· Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
· Checked—Create an attribute index. This is the default.
· Unchecked—Do not create an attribute index.
2.
Route Identifier Field حقل معرف
الطريق
The field containing values that uniquely identify each route.
الحقل الذي يحتوي على
القيم التي تحدد كل مسار بشكل فريد.
3.
Output Route Feature Class فئة
ميزات طرق الإخراج
The feature class to be
created. It can be a shapefile or a geodatabase feature class.
فئة الميزة المراد إنشاؤها. يمكن أن يكون ملف شكل
أو فئة معالم قاعدة بيانات جغرافية.
Measure
Source
Specifies how route measures will be obtained.
· LENGTH—The geometric length of the input features will be used to
accumulate the measures. This is the default.
· ONE_FIELD—The value stored in a single field will be used to accumulate
the measures.
· TWO_FIELDS—The values stored in both from- and to- measure fields will be
used to set the measures.
From-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is ONE_FIELD or TWO_FIELDS.
To-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is TWO_FIELDS.
Coordinate
Priority (optional)
The position from which measures will be accumulated for each output
route. This parameter is ignored when the measure source is TWO_FIELDS.
· UPPER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper left corner. This is the default.
· LOWER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower left corner.
· UPPER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper right corner.
· LOWER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower right corner.
Measure
Factor (optional)
A value multiplied by the measure length of each input line before they
are merged to create route measures. The default is 1.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
· Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
· Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
· Checked—Create an attribute index. This is the default.
· Unchecked—Do not create an attribute index.
4.
Measure Source مصدر القياس
Specifies how route
measures will be obtained.
·
LENGTH—The geometric length of the input features will be used to
accumulate the measures. This is the default.
·
ONE_FIELD—The value stored in a single field will be used to
accumulate the measures.
·
TWO_FIELDS—The values stored in both from- and to- measure fields
will be used to set the measures.
يحدد كيفية الحصول على مقاييس المسار.
• LENGTH -
سيتم استخدام الطول الهندسي لسمات الإدخال لتجميع القياسات. هذا هو الافتراضي.
• ONE_FIELD - سيتم استخدام القيمة المخزنة في حقل واحد لتجميع المقاييس.
• TWO_FIELDS - سيتم استخدام القيم المخزنة في حقلي "من" و
"قياس" لتعيين المقاييس.
From-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is ONE_FIELD or TWO_FIELDS.
To-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is TWO_FIELDS.
Coordinate
Priority (optional)
The position from which measures will be accumulated for each output
route. This parameter is ignored when the measure source is TWO_FIELDS.
· UPPER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper left corner. This is the default.
· LOWER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower left corner.
· UPPER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper right corner.
· LOWER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower right corner.
Measure
Factor (optional)
A value multiplied by the measure length of each input line before they
are merged to create route measures. The default is 1.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
· Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
· Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
· Checked—Create an attribute index. This is the default.
· Unchecked—Do not create an attribute index.
5.
From-Measure Field (optional) حقل
من القياس (اختياري)
A field containing
measure values. This field must be numeric and is required when the measure
source is ONE_FIELD or TWO_FIELDS.
حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل
رقميًا ويكون مطلوبًا عندما يكون مصدر القياس ONE_FIELD أو TWO_FIELDS.
To-Measure
Field (optional)
A field containing measure values. This field must be numeric and is
required when the measure source is TWO_FIELDS.
Coordinate
Priority (optional)
The position from which measures will be accumulated for each output
route. This parameter is ignored when the measure source is TWO_FIELDS.
· UPPER_LEFT—Measures will be accumulated from the point closest to the minimum
bounding rectangle's upper left corner. This is the default.
· LOWER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower left corner.
· UPPER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper right corner.
· LOWER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower right corner.
Measure
Factor (optional)
A value multiplied by the measure length of each input line before they
are merged to create route measures. The default is 1.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
· Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
· Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
· Checked—Create an attribute index. This is the default.
· Unchecked—Do not create an attribute index.
6.
To-Measure Field (optional) حقل
القياس (اختياري)
A field containing
measure values. This field must be numeric and is required when the measure
source is TWO_FIELDS.
حقل يحتوي على قيم القياس. يجب أن يكون هذا الحقل
رقميًا ويكون مطلوبًا عندما يكون مصدر القياس هو TWO_FIELDS.
Coordinate
Priority (optional)
The position from which measures will be accumulated for each output
route. This parameter is ignored when the measure source is TWO_FIELDS.
· UPPER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper left corner. This is the default.
· LOWER_LEFT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower left corner.
· UPPER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's upper right corner.
· LOWER_RIGHT—Measures will be accumulated from the point closest to the
minimum bounding rectangle's lower right corner.
Measure
Factor (optional)
A value multiplied by the measure length of each input line before they
are merged to create route measures. The default is 1.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
· Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
· Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
· Checked—Create an attribute index. This is the default.
· Unchecked—Do not create an attribute index.
7.
Coordinate Priority (optional) أولوية
التنسيق (اختياري)
The position from which
measures will be accumulated for each output route. This parameter is ignored
when the measure source is TWO_FIELDS.
·
UPPER_LEFT—Measures will be accumulated from the point closest to
the minimum bounding rectangle's upper left corner. This is the default.
·
LOWER_LEFT—Measures will be accumulated from the point closest to
the minimum bounding rectangle's lower left corner.
·
UPPER_RIGHT—Measures will be accumulated from the point closest to
the minimum bounding rectangle's upper right corner.
·
LOWER_RIGHT—Measures will be accumulated from the point closest to
the minimum bounding rectangle's lower right corner.
الموضع الذي سيتم من خلاله تجميع المقاييس لكل
مسار إخراج. يتم تجاهل هذه المعلمة عندما يكون مصدر القياس هو TWO_FIELDS.
• UPPER_LEFT - سيتم تجميع المقاييس من أقرب نقطة إلى الزاوية اليسرى العلوية
الدنيا لمستطيل إحاطة. هذا هو الافتراضي.
• LOWER_LEFT - سيتم تجميع المقاييس من أقرب نقطة إلى الزاوية اليسرى السفلية
الدنيا لمستطيل الإحاطة.
• UPPER_RIGHT - سيتم تجميع المقاييس من أقرب نقطة إلى الزاوية اليمنى العليا
لمستطيل الإحاطة الأدنى.
• LOWER_RIGHT - سيتم تجميع المقاييس من أقرب نقطة إلى الزاوية اليمنى السفلية
الدنيا لمستطيل الإحاطة.
Measure
Factor (optional)
A value multiplied by the measure length of each input line before they
are merged to create route measures. The default is 1.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
· Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
· Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
· Checked—Create an attribute index. This is the default.
· Unchecked—Do not create an attribute index.
8.
Measure Factor (optional) عامل
القياس (اختياري)
A value multiplied by
the measure length of each input line before they are merged to create route
measures. The default is 1.
قيمة مضروبة في طول المقياس لكل سطر إدخال قبل
دمجها لإنشاء مقاييس المسار. الافتراضي هو 1.
9.
Measure Offset (optional) قياس
الإزاحة (اختياري)
A value added to the
route measures after the input lines have been merged to create a route. The
default is 0.
قيمة مضافة إلى مقاييس المسار بعد دمج خطوط
الإدخال لإنشاء مسار. الافتراضي هو 0.
10.
Ignore spatial gaps (optional) تجاهل
الفجوات المكانية (اختياري)
Specifies whether
spatial gaps will be ignored when calculating the measures on disjointed
routes. This parameter is applicable when the measure source is LENGTH or
ONE_FIELD.
·
Checked—Spatial gaps will be ignored. Measure values will be
continuous for disjointed routes. This is the default.
·
Unchecked—Do not ignore spatial gaps. The measure values on
disjointed routes will have gaps. The gap distance is calculated using the
straight-line distance between the endpoints of the disjointed parts.
يحدد ما إذا كان سيتم تجاهل الفجوات المكانية عند
حساب المقاييس على المسارات المفككة. هذه المعلمة قابلة للتطبيق عندما يكون مصدر
القياس هو LENGTH أو ONE_FIELD.
• تم التحديد - سيتم
تجاهل الفجوات المكانية. ستكون قيم القياس مستمرة للمسارات المفككة. هذا هو
الافتراضي.
• لم يتم التحقق منه — لا
تتجاهل الفجوات المكانية. سيكون لقيم القياس على المسارات المفككة فجوات. يتم حساب
مسافة الفجوة باستخدام مسافة الخط المستقيم بين نقطتي نهاية الأجزاء المفككة.
11.
Build index (optional) فهرس البناء
(اختياري)
Specifies whether an
attribute index will be created for the route identifier field that is written
to the output route feature class.
·
Checked—Create an attribute index. This is the default.
·
Unchecked—Do not create an attribute index. Build index (optional)
يحدد ما إذا كان سيتم إنشاء فهرس السمات لحقل معرف
المسار الذي تمت كتابته إلى فئة معلم مسار الإخراج.
• تم التحديد — إنشاء
فهرس سمة. هذا هو الافتراضي.
• غير محدد — لا تقم بإنشاء فهرس سمة.Specifies whether an
attribute index will be created for the route identifier field that is written
to the output route feature class.
·Checked—Create an attribute index. This is the default.
·Unchecked—Do not create an attribute index.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
·Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
·Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
·Checked—Create an attribute index. This is the default.
·Unchecked—Do not create an attribute index.
Measure
Offset (optional)
A value added to the route measures after the input lines have been merged
to create a route. The default is 0.
Ignore
spatial gaps (optional)
Specifies whether spatial gaps will be ignored when calculating the
measures on disjointed routes. This parameter is applicable when the measure
source is LENGTH or ONE_FIELD.
·Checked—Spatial gaps will be ignored. Measure values will be continuous
for disjointed routes. This is the default.
·Unchecked—Do not ignore spatial gaps. The measure values on disjointed
routes will have gaps. The gap distance is calculated using the straight-line
distance between the endpoints of the disjointed parts.
Build
index (optional)
Specifies whether an attribute index will be created for the route
identifier field that is written to the output route feature class.
·Checked—Create an attribute index. This is the default.
·Unchecked—Do not create an attribute index.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق