موقع GIS for WE نظم المعلومات الجغرافية (GIS) وبرامج ArcGIS

Locate Features Along Routes Tool

أداة حدد موقع المعالم على طول الطرق

ArcMap ArcGIS

How to use Locate Features Along Routes Tool in Arc Toolbox ArcMap ArcGIS??

كيفية استخدام أداة حدد موقع المعالم على طول الطرق ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Locate Features Along Routes Tool, Linear Referencing Tools Toolbox

 

Locate Features Along Routes

Computes the intersection of input features (point, line, or polygon) and route features and writes the route and measure information to a new event table.

يحسب تقاطع معالم الإدخال (نقطة أو خط أو مضلع) ومعالم الطرق ويكتب الطريق وقياس المعلومات إلى جدول حدث جديد.

1.    Input Features أدخل المعالم

The input point, line, or polygon features.

نقطة الإدخال أو الخط أو معالم المضلع.

Input Route Features

The routes with which the input features will be intersected.

Route Identifier Field

The field containing values that uniquely identify each route. This field can be numeric or character.

Search Radius

If the input features are points, the search radius is a numeric value defining how far around each point a search will be done to find a target route.

If the input features are lines, the search tolerance is really a cluster tolerance, which is a numeric value representing the maximum tolerated distance between the input lines and the target routes.

If the input features are polygons, this parameter is ignored and no search radius is used.

Output Event Table

The table to be created.

Output Event Table Properties

Parameter consisting of the route location fields and the type of events that will be written to the output event table.

·      Route Identifier Field—The field that will contain values that indicate the route on which each event is located.

·      Event Type—The type of events the output event table will contain (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a single measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field that will contain measure values. Required when the event type is LINE.

Keep only the closest route location (optional)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

·      Checked—Only the closest route location will be written to the output event table. This is the default.

·      Unchecked—Every route location (within the search radius) will be written to the output event table.

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·      Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·      Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·      Checked—Zero-length line events will be written to the output event table. This is the default.

·      Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·      Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·      Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·      Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·      Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

2.    Input Route Features معالم الطرق المدخلة

The routes with which the input features will be intersected.

المسارات التي سيتم تقاطع ميزات الإدخال معها.

Route Identifier Field

The field containing values that uniquely identify each route. This field can be numeric or character.

Search Radius

If the input features are points, the search radius is a numeric value defining how far around each point a search will be done to find a target route.

If the input features are lines, the search tolerance is really a cluster tolerance, which is a numeric value representing the maximum tolerated distance between the input lines and the target routes.

If the input features are polygons, this parameter is ignored and no search radius is used.

Output Event Table

The table to be created.

Output Event Table Properties

Parameter consisting of the route location fields and the type of events that will be written to the output event table.

·      Route Identifier Field—The field that will contain values that indicate the route on which each event is located.

·      Event Type—The type of events the output event table will contain (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a single measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field that will contain measure values. Required when the event type is LINE.

Keep only the closest route location (optional)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

·      Checked—Only the closest route location will be written to the output event table. This is the default.

·      Unchecked—Every route location (within the search radius) will be written to the output event table.

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·      Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·      Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·      Checked—Zero-length line events will be written to the output event table. This is the default.

·      Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·      Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·      Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·      Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·      Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

3.    Route Identifier Field حقل معرف الطريق

The field containing values that uniquely identify each route. This field can be numeric or character.

الحقل الذي يحتوي على القيم التي تحدد كل مسار بشكل فريد. يمكن أن يكون هذا الحقل رقميًا أو محرفًا.

Search Radius

If the input features are points, the search radius is a numeric value defining how far around each point a search will be done to find a target route.

If the input features are lines, the search tolerance is really a cluster tolerance, which is a numeric value representing the maximum tolerated distance between the input lines and the target routes.

If the input features are polygons, this parameter is ignored and no search radius is used.

Output Event Table

The table to be created.

Output Event Table Properties

Parameter consisting of the route location fields and the type of events that will be written to the output event table.

·      Route Identifier Field—The field that will contain values that indicate the route on which each event is located.

·      Event Type—The type of events the output event table will contain (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a single measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field that will contain measure values. Required when the event type is LINE.

Keep only the closest route location (optional)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

·      Checked—Only the closest route location will be written to the output event table. This is the default.

·      Unchecked—Every route location (within the search radius) will be written to the output event table.

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·      Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·      Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·      Checked—Zero-length line events will be written to the output event table. This is the default.

·      Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·      Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·      Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·      Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·      Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

4.    Search Radius بحث نصف القطر

If the input features are points, the search radius is a numeric value defining how far around each point a search will be done to find a target route.

If the input features are lines, the search tolerance is really a cluster tolerance, which is a numeric value representing the maximum tolerated distance between the input lines and the target routes.

If the input features are polygons, this parameter is ignored and no search radius is used.

إذا كانت ميزات الإدخال عبارة عن نقاط ، فإن نصف قطر البحث عبارة عن قيمة رقمية تحدد مدى المسافة حول كل نقطة سيتم إجراء بحث للعثور على مسار مستهدف.

إذا كانت ميزات الإدخال عبارة عن خطوط ، فإن تفاوت البحث هو في الحقيقة تفاوت الكتلة ، وهو عبارة عن قيمة رقمية تمثل الحد الأقصى للمسافة المسموح بها بين خطوط الإدخال والمسارات المستهدفة.

إذا كانت ميزات الإدخال عبارة عن مضلعات ، فسيتم تجاهل هذه المعلمة ولا يتم استخدام نصف قطر البحث.

Output Event Table

The table to be created.

Output Event Table Properties

Parameter consisting of the route location fields and the type of events that will be written to the output event table.

·      Route Identifier Field—The field that will contain values that indicate the route on which each event is located.

·      Event Type—The type of events the output event table will contain (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a single measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field that will contain measure values. Required when the event type is LINE.

Keep only the closest route location (optional)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

·      Checked—Only the closest route location will be written to the output event table. This is the default.

·      Unchecked—Every route location (within the search radius) will be written to the output event table.

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·      Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·      Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·      Checked—Zero-length line events will be written to the output event table. This is the default.

·      Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·      Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·      Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·      Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·      Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

5.    Output Event Table جدول حدث الإخراج

The table to be created.

الجدول المراد إنشاؤه.

Output Event Table Properties

Parameter consisting of the route location fields and the type of events that will be written to the output event table.

·      Route Identifier Field—The field that will contain values that indicate the route on which each event is located.

·      Event Type—The type of events the output event table will contain (POINT or LINE).

o   POINT—Point events occur at a precise location along a route. Only a single measure field must be specified.

o   LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

·      From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

·      To-Measure Field—A field that will contain measure values. Required when the event type is LINE.

Keep only the closest route location (optional)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

·      Checked—Only the closest route location will be written to the output event table. This is the default.

·      Unchecked—Every route location (within the search radius) will be written to the output event table.

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·      Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·      Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·      Checked—Zero-length line events will be written to the output event table. This is the default.

·      Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·      Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·      Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·      Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·      Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

6.    Output Event Table Properties خصائص جدول حدث الإخراج

Parameter consisting of the route location fields and the type of events that will be written to the output event table.

· Route Identifier Field—The field that will contain values that indicate the route on which each event is located.

· Event Type—The type of events the output event table will contain (POINT or LINE).

oPOINT—Point events occur at a precise location along a route. Only a single measure field must be specified.

oLINE—Line events define a portion of a route. Both from- and to-measure fields must be specified.

· From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field.

· To-Measure Field—A field that will contain measure values. Required when the event type is LINE.

تتكون المعلمة من حقول موقع المسار ونوع الأحداث التي ستتم كتابتها في جدول حدث الإخراج.

• حقل معرّف المسار - الحقل الذي سيحتوي على القيم التي تشير إلى المسار الذي يقع عليه كل حدث.

• نوع الحدث - نوع الأحداث التي سيحتويها جدول الحدث الناتج (POINT أو LINE).

o POINT - تحدث أحداث النقطة في موقع محدد على طول الطريق. يجب تحديد حقل قياس واحد فقط.

o LINE - تحدد أحداث الخط جزءًا من المسار. يجب تحديد حقلي "من" و "إلى" قياس.

• From-Measure Field - حقل يحتوي على قيم القياس. مطلوبة عندما يكون نوع الحدث هو POINT أو LINE. ملاحظة عندما يكون "نوع الحدث" هو POINT ، فإن تسمية هذه المعلمة تصبح "حقل قياس".

• حقل القياس - حقل يحتوي على قيم القياس. مطلوبة عندما يكون نوع الحدث هو LINE.

7.    Keep only the closest route location (optional) احتفظ فقط بأقرب موقع طريق (اختياري)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

· Checked—Only the closest route location will be written to the output event table. This is the default.

· Unchecked—Every route location (within the search radius) will be written to the output event table.

عند تحديد مواقع النقاط على طول المسارات ، من الممكن أن يكون أكثر من مسار واحد ضمن نصف قطر البحث لأي نقطة معينة. يتم تجاهل هذه المعلمة عند تحديد موقع الخطوط أو المضلعات على طول المسارات.

• تم التحديد - ستتم كتابة أقرب موقع مسار فقط إلى جدول حدث الإخراج. هذا هو الافتراضي.

• غير محدد — ستتم كتابة كل موقع مسار (داخل نصف قطر البحث) في جدول حدث الإخراج.

8.    Include distance field on output table (optional) تضمين حقل المسافة في جدول الإخراج (اختياري)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

· Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

· Unchecked—A field containing the point-to-route distance will not be added to the output event table.

يحدد ما إذا كان سيتم إضافة حقل يسمى DISTANCE إلى جدول حدث الإخراج. القيم الموجودة في هذا الحقل هي وحدات نصف قطر البحث المحدد. يتم تجاهل هذه المعلمة عند تحديد موقع الخطوط أو المضلعات على طول المسارات.

• تم التحديد - ستتم إضافة حقل يحتوي على مسافة نقطة إلى مسار إلى جدول حدث الإخراج. هذا هو الافتراضي.

• غير محدد - لن يتم إضافة حقل يحتوي على مسافة من نقطة إلى مسار إلى جدول حدث الإخراج.

9.    Keep zero length line events (optional) الاحتفاظ بأحداث خط الطول الصفري (اختياري)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

· Checked—Zero-length line events will be written to the output event table. This is the default.

· Unchecked—Zero-length line events will not be written to the output event table.

عند تحديد موقع المضلعات على طول المسارات ، من الممكن إنشاء أحداث حيث يكون المقياس من القياس مساويًا للقياس. يتم تجاهل هذه المعلمة عند تحديد موقع النقاط أو الخطوط على طول المسارات.

• تم التحديد - ستتم كتابة أحداث السطر الصفري في جدول حدث الإخراج. هذا هو الافتراضي.

• غير محدد - لن تتم كتابة أحداث السطر الصفري في جدول حدث الإخراج.

10. Include all fields from input (optional) قم بتضمين جميع الحقول من الإدخال (اختياري)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

· Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

· Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

يحدد ما إذا كان جدول حدث الإخراج سيحتوي على حقول موقع المسار بالإضافة إلى جميع السمات من ميزات الإدخال.

• تم التحديد - سيحتوي جدول حدث الإخراج على حقول موقع المسار بالإضافة إلى جميع السمات من ميزات الإدخال. هذا هو الافتراضي.

• غير محدد - سيحتوي جدول حدث الإخراج فقط على حقول موقع المسار بالإضافة إلى حقل معرف الكائن من ميزات الإدخال.

11. Use M Direction Offsetting (optional) أسخدام معالم اتجاه التجانب (اختياري)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

· Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

· Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+). Use M Direction Offsetting (optional)

يحدد ما إذا كانت مسافة الإزاحة المحسوبة يجب أن تستند إلى الاتجاه M أو الاتجاه الرقمي. يتم تضمين المسافات في جدول حدث الإخراج إذا تم تحديد تضمين حقل المسافة في جدول الإخراج.

• تم التحديد - سيتم حساب قيم المسافة في جدول حدث المخرجات بناءً على اتجاه M للمسارات. ميزات الإدخال على يسار الاتجاه M للمسار سيتم تعيين إزاحة موجبة (+) ، وسيتم تعيين قيمة إزاحة سالبة للميزات الموجودة على يمين الاتجاه M (-). هذا هو الافتراضي.

• غير محدد - سيتم حساب قيم المسافة في جدول حدث الإخراج بناءً على الاتجاه الرقمي للمسارات. ميزات الإدخال على يسار الاتجاه الرقمي للمسار سيتم تعيين إزاحة سالبة (-) ، وسيتم تعيين قيمة إزاحة موجبة (+) للميزات الموجودة على يمين الاتجاه الرقمي.Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·Checked—Zero-length line events will be written to the output event table. This is the default.

·Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·Checked—Zero-length line events will be written to the output event table. This is the default.

·Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

Keep only the closest route location (optional)

When locating points along routes, it is possible that more than one route may be within the search radius of any given point. This parameter is ignored when locating lines or polygons along routes.

·Checked—Only the closest route location will be written to the output event table. This is the default.

·Unchecked—Every route location (within the search radius) will be written to the output event table.

Include distance field on output table (optional)

Specifies whether a field named DISTANCE will be added to the output event table. The values in this field are in the units of the specified search radius. This parameter is ignored when locating lines or polygons along routes.

·Checked—A field containing the point-to-route distance will be added to the output event table. This is the default.

·Unchecked—A field containing the point-to-route distance will not be added to the output event table.

Keep zero length line events (optional)

When locating polygons along routes, it is possible that events can be created where the from-measure is equal to the to-measure. This parameter is ignored when locating points or lines along routes.

·Checked—Zero-length line events will be written to the output event table. This is the default.

·Unchecked—Zero-length line events will not be written to the output event table.

Include all fields from input (optional)

Specifies whether the output event table will contain route location fields plus all the attributes from the input features.

·Checked—The output event table will contain route location fields plus all the attributes from the input features. This is the default.

·Unchecked—The output event table will only contain route location fields plus the ObjectID field from the input features.

Use M Direction Offsetting (optional)

Specifies whether the offset distance calculated should be based on the M direction or the digitized direction. Distances are included in the output event table if Include distance field on output table is checked.

·Checked—The distance values in the output event table will be calculated based on the routes' M direction. Input features to the left of the M direction of the route will be assigned a positive offset (+), and features to the right of the M direction will be assigned a negative offset value (-). This is the default.

·Unchecked—The distance values in the output event table will be calculated based on the routes' digitized direction. Input features to the left of the digitized direction of the route will be assigned a negative (-) offset, and features to the right of the digitized direction will be assigned a positive offset value (+).

 اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:

مجموعة على الفيس بوك ArcGIS Pro من هنا.

مجموعة على الفيس بوك GIS for WE - ArcGIS Pro من هنا.

صفحة الفيس بوك GIS for WE من هنا.