Compute Camera Model Tool
أداة حساب طراز
الكاميرا
ArcMap ArcGIS
How to Compute Camera Model Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة حساب طراز الكاميرا ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Compute
Camera Model Tool, Ortho Mapping Toolset, Raster
Box, Data Management Tools Toolbox
Compute Camera Model
Estimates the exterior
camera model and interior camera model from the EXIF header of the raw image
and refines the camera models. The model is then applied to the mosaic dataset
with an option to use a tool-generated, high-resolution digital surface model
(DSM) to achieve better orthorectification.
This is especially
helpful for UAV and UAS images, where the exterior and interior camera models
are coarse or undefined.
تقدر طراز الكاميرا الخارجية وطراز الكاميرا
الداخلية من رأس EXIF للصورة الأولية وتنقية
نماذج الكاميرا. ثم يتم تطبيق النموذج على مجموعة بيانات دمج الصور مع خيار
استخدام نموذج سطح رقمي عالي الدقة تم إنشاؤه بواسطة أداة (DSM)
لتحقيق تقويم تقويم أفضل.
هذا مفيد بشكل خاص لصور الطائرات بدون طيار و UAS ، حيث
تكون نماذج الكاميرا الخارجية والداخلية خشنة أو غير محددة.
Input
Mosaic Dataset
The mosaic dataset on which to build and calculate the camera model.
Although not mandatory, it is recommended that the Apply Block Adjustment
tool has been previously run on the input mosaic dataset.
Output DSM
(optional)
A digital surface model raster dataset generated from the adjusted images
in the mosaic dataset. If Apply Adjustment is checked, this DSM will be used to
replace the DEM in the geometric function to achieve better orthorectification.
GPS
Location Accuracy (optional)
The accuracy level of your input images. The tool will search for images
in the neighborhood to compute matching points and automatically apply an
adjustment strategy based on the accuracy level.
· HIGH— GPS accuracy is 0 to 10 meters, and the tool uses a maximum of 4 by
3 images.
· MEDIUM— GPS accuracy of 10 to 20 meters, and the tool uses a maximum of 4
by 6 images.
· LOW— GPS accuracy of 20 to 50 meters, and the tool uses a maximum of 4 by
12 images.
· VERY_LOW— GPS accuracy is more than 50 meters, and the tool uses a maximum
of 4 by 20 images.
Estimate
Camera Model (optional)
Estimates the camera model by computing the adjustment based on eight
times the mosaic dataset's source resolution. Computing adjustment at such
levels will be faster but less accurate.
· Checked—The camera model will be estimated. This is the default.
· Unchecked—The camera model will not be estimated.
Refine
Camera Model (optional)
Computes the adjustment at the mosaic dataset resolution. Computing
adjustment at this level will provide the most accurate result.
· Checked—The adjustment will be computed at the source resolution. This is
the default.
· Unchecked—The adjustment will not be computed at the source resolution.
This option will be faster, so it is a good option when you do not need the
computation to be performed at the source resolution.
Apply
Adjustment (optional)
Choose whether to apply the adjusted transformation to the mosaic dataset.
· Checked—Apply the calculated adjustment to the input mosaic dataset. This
is the default.
· Unchecked—Do not apply the calculated adjustment to the input mosaic
dataset.
Maximum
Residual (optional)
The maximum residual value allowed to keep a computed control point as a
valid control point. The default is 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when
estimating the camera model. The default value is 8, which means eight times
the source pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
1.
Input Mosaic Dataset أدخل مجموعة
بيانات دمج الصور
The mosaic dataset on
which to build and calculate the camera model.
Although not mandatory,
it is recommended that the Apply Block Adjustment tool has been previously run
on the input mosaic dataset.
مجموعة البيانات دمج الصور التي يتم بناء وحساب
نموذج الكاميرا عليها.
على الرغم من أنه ليس إلزاميًا ، إلا أنه يوصى
بتشغيل أداة Apply Block Adjustment مسبقًا على مجموعة
بيانات دمج الصور الإدخال.
Output DSM
(optional)
A digital surface model raster dataset generated from the adjusted images
in the mosaic dataset. If Apply Adjustment is checked, this DSM will be used to
replace the DEM in the geometric function to achieve better orthorectification.
GPS
Location Accuracy (optional)
The accuracy level of your input images. The tool will search for images
in the neighborhood to compute matching points and automatically apply an
adjustment strategy based on the accuracy level.
· HIGH— GPS accuracy is 0 to 10 meters, and the tool uses a maximum of 4 by
3 images.
· MEDIUM— GPS accuracy of 10 to 20 meters, and the tool uses a maximum of 4
by 6 images.
· LOW— GPS accuracy of 20 to 50 meters, and the tool uses a maximum of 4 by
12 images.
· VERY_LOW— GPS accuracy is more than 50 meters, and the tool uses a maximum
of 4 by 20 images.
Estimate
Camera Model (optional)
Estimates the camera model by computing the adjustment based on eight
times the mosaic dataset's source resolution. Computing adjustment at such
levels will be faster but less accurate.
· Checked—The camera model will be estimated. This is the default.
· Unchecked—The camera model will not be estimated.
Refine
Camera Model (optional)
Computes the adjustment at the mosaic dataset resolution. Computing
adjustment at this level will provide the most accurate result.
· Checked—The adjustment will be computed at the source resolution. This is
the default.
· Unchecked—The adjustment will not be computed at the source resolution.
This option will be faster, so it is a good option when you do not need the
computation to be performed at the source resolution.
Apply
Adjustment (optional)
Choose whether to apply the adjusted transformation to the mosaic dataset.
· Checked—Apply the calculated adjustment to the input mosaic dataset. This
is the default.
· Unchecked—Do not apply the calculated adjustment to the input mosaic
dataset.
Maximum
Residual (optional)
The maximum residual value allowed to keep a computed control point as a
valid control point. The default is 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when
estimating the camera model. The default value is 8, which means eight times
the source pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
2.
Output DSM (optional) إخراج دي أس
أم (اختياري)
A digital surface model
raster dataset generated from the adjusted images in the mosaic dataset. If
Apply Adjustment is checked, this DSM will be used to replace the DEM in the
geometric function to achieve better orthorectification.
مجموعة بيانات نقطية رقمية لنموذج السطح تم
إنشاؤها من الصور المعدلة في مجموعة بيانات دمج الصور. إذا تم تحديد تطبيق الضبط ،
فسيتم استخدام DSM هذا لاستبدال DEM في
الوظيفة الهندسية لتحقيق تقويم تقويم أفضل.
GPS Location
Accuracy (optional)
The accuracy level of your input images. The tool will search for images
in the neighborhood to compute matching points and automatically apply an
adjustment strategy based on the accuracy level.
· HIGH— GPS accuracy is 0 to 10 meters, and the tool uses a maximum of 4 by
3 images.
· MEDIUM— GPS accuracy of 10 to 20 meters, and the tool uses a maximum of 4
by 6 images.
· LOW— GPS accuracy of 20 to 50 meters, and the tool uses a maximum of 4 by
12 images.
· VERY_LOW— GPS accuracy is more than 50 meters, and the tool uses a maximum
of 4 by 20 images.
Estimate
Camera Model (optional)
Estimates the camera model by computing the adjustment based on eight
times the mosaic dataset's source resolution. Computing adjustment at such
levels will be faster but less accurate.
· Checked—The camera model will be estimated. This is the default.
· Unchecked—The camera model will not be estimated.
Refine
Camera Model (optional)
Computes the adjustment at the mosaic dataset resolution. Computing
adjustment at this level will provide the most accurate result.
· Checked—The adjustment will be computed at the source resolution. This is
the default.
· Unchecked—The adjustment will not be computed at the source resolution.
This option will be faster, so it is a good option when you do not need the
computation to be performed at the source resolution.
Apply
Adjustment (optional)
Choose whether to apply the adjusted transformation to the mosaic dataset.
· Checked—Apply the calculated adjustment to the input mosaic dataset. This
is the default.
· Unchecked—Do not apply the calculated adjustment to the input mosaic
dataset.
Maximum
Residual (optional)
The maximum residual value allowed to keep a computed control point as a
valid control point. The default is 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when
estimating the camera model. The default value is 8, which means eight times
the source pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
3.
GPS Location Accuracy (optional) دقة
موقع الجي بي أس (اختياري)
The accuracy level of
your input images. The tool will search for images in the neighborhood to
compute matching points and automatically apply an adjustment strategy based on
the accuracy level.
·
HIGH— GPS accuracy is 0 to 10 meters, and the tool uses a maximum
of 4 by 3 images.
·
MEDIUM— GPS accuracy of 10 to 20 meters, and the tool uses a
maximum of 4 by 6 images.
·
LOW— GPS accuracy of 20 to 50 meters, and the tool uses a maximum
of 4 by 12 images.
·
VERY_LOW— GPS accuracy is more than 50 meters, and the tool uses a
maximum of 4 by 20 images.
مستوى دقة صور المدخلات الخاصة بك. ستقوم الأداة
بالبحث عن الصور في الحي لحساب نقاط المطابقة وتطبيق إستراتيجية تعديل تلقائيًا
بناءً على مستوى الدقة.
• عالية - دقة نظام تحديد
المواقع العالمي (GPS) تتراوح من 0 إلى 10 أمتار ، وتستخدم الأداة صورًا بحد أقصى 4 ×
3.
• متوسط - دقة نظام تحديد
المواقع العالمي (GPS) من 10 إلى 20 مترًا ، وتستخدم الأداة صورًا بحد أقصى 4 × 6.
• منخفضة - دقة نظام
تحديد المواقع العالمي (GPS) تتراوح من 20 إلى 50
مترًا ، وتستخدم الأداة حدًا أقصى 4 × 12 صورة.
• VERY_LOW - دقة نظام تحديد المواقع العالمي (GPS) تزيد
عن 50 مترًا ، وتستخدم الأداة حدًا أقصى 4 × 20 صورة.
Estimate
Camera Model (optional)
Estimates the camera model by computing the adjustment based on eight
times the mosaic dataset's source resolution. Computing adjustment at such
levels will be faster but less accurate.
· Checked—The camera model will be estimated. This is the default.
· Unchecked—The camera model will not be estimated.
Refine
Camera Model (optional)
Computes the adjustment at the mosaic dataset resolution. Computing
adjustment at this level will provide the most accurate result.
· Checked—The adjustment will be computed at the source resolution. This is
the default.
· Unchecked—The adjustment will not be computed at the source resolution.
This option will be faster, so it is a good option when you do not need the
computation to be performed at the source resolution.
Apply
Adjustment (optional)
Choose whether to apply the adjusted transformation to the mosaic dataset.
· Checked—Apply the calculated adjustment to the input mosaic dataset. This
is the default.
· Unchecked—Do not apply the calculated adjustment to the input mosaic
dataset.
Maximum
Residual (optional)
The maximum residual value allowed to keep a computed control point as a
valid control point. The default is 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when
estimating the camera model. The default value is 8, which means eight times
the source pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and removed.
The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
4.
Estimate Camera Model (optional) تقدير
طراز الكاميرا (اختياري)
Estimates the camera
model by computing the adjustment based on eight times the mosaic dataset's
source resolution. Computing adjustment at such levels will be faster but less
accurate.
·
Checked—The camera model will be estimated. This is the default.
·
Unchecked—The camera model will not be estimated.
تقدير نموذج الكاميرا عن طريق حساب الضبط بناءً
على ثمانية أضعاف دقة مصدر مجموعة بيانات دمج الصور. سيكون تعديل الحوسبة عند هذه
المستويات أسرع ولكن أقل دقة.
• تم التحديد - سيتم
تقدير طراز الكاميرا. هذا هو الافتراضي.
• غير محدد - لن يتم
تقدير طراز الكاميرا.
5.
Refine Camera Model (optional) صقل
طراز الكاميرا (اختياري)
Computes the adjustment
at the mosaic dataset resolution. Computing adjustment at this level will
provide the most accurate result.
·
Checked—The adjustment will be computed at the source resolution.
This is the default.
·
Unchecked—The adjustment will not be computed at the source
resolution. This option will be faster, so it is a good option when you do not
need the computation to be performed at the source resolution.
يحسب التعديل بدقة مجموعة بيانات دمج الصور. سيوفر
تعديل الحساب عند هذا المستوى النتيجة الأكثر دقة.
• تم التحديد - سيتم حساب
الضبط على دقة المصدر. هذا هو الافتراضي.
• غير محدد - لن يتم حساب
الضبط في دقة المصدر. سيكون هذا الخيار أسرع ، لذا فهو خيار جيد عندما لا تحتاج
إلى إجراء الحساب بدقة المصدر.
Apply
Adjustment (optional)
Choose whether to apply the adjusted transformation to the mosaic dataset.
· Checked—Apply the calculated adjustment to the input mosaic dataset. This
is the default.
· Unchecked—Do not apply the calculated adjustment to the input mosaic
dataset.
Maximum
Residual (optional)
The maximum residual value allowed to keep a computed control point as a
valid control point. The default is 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when
estimating the camera model. The default value is 8, which means eight times
the source pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
6.
Apply Adjustment (optional) تطبيق
التعديل (اختياري)
Choose whether to apply
the adjusted transformation to the mosaic dataset.
·
Checked—Apply the calculated adjustment to the input mosaic
dataset. This is the default.
·
Unchecked—Do not apply the calculated adjustment to the input
mosaic dataset.
اختر ما إذا كنت تريد تطبيق التحويل المعدل على
مجموعة بيانات دمج الصور.
• تم التحديد - قم بتطبيق
التعديل المحسوب على مجموعة بيانات دمج الصور المدخلة. هذا هو الافتراضي.
• غير محدد - لا تقم
بتطبيق التعديل المحسوب على مجموعة بيانات دمج الصور المدخلة.
Maximum Residual
(optional)
The maximum residual value allowed to keep a computed control point as a
valid control point. The default is 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when estimating
the camera model. The default value is 8, which means eight times the source
pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
7.
Maximum Residual (optional) الحد
الأقصى المتبقي (اختياري)
The maximum residual
value allowed to keep a computed control point as a valid control point. The
default is 5.
الحد الأقصى للقيمة المتبقية المسموح بها للاحتفاظ
بنقطة تحكم محسوبة كنقطة تحكم صالحة. الافتراضي هو 5.
Initial
Tie Point Resolution (optional)
Defines the resolution factor at which tie points are generated when
estimating the camera model. The default value is 8, which means eight times
the source pixel resolution.
For images with only minor differentiation of features, such as
agriculture fields, a lower value such as 2 can be used.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
8.
Initial Tie Point Resolution (optional) دقة نقطة التعادل الأولية (اختياري)
Defines the resolution
factor at which tie points are generated when estimating the camera model. The
default value is 8, which means eight times the source pixel resolution.
For images with only
minor differentiation of features, such as agriculture fields, a lower value
such as 2 can be used.
يحدد عامل الدقة الذي يتم عنده إنشاء نقاط الربط
عند تقدير نموذج الكاميرا. القيمة الافتراضية هي 8 ، مما يعني ثمانية أضعاف دقة
بكسل المصدر.
بالنسبة للصور ذات التمايز البسيط بين الميزات ،
مثل حقول الزراعة ، يمكن استخدام قيمة أقل مثل 2.
Output
Control Point Table (optional)
The optional control points feature class.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
9.
Output Control Point Table (optional) جدول نقطة التحكم في الإخراج (اختياري)
The optional control
points feature class.
فئة ميزة نقاط التحكم الاختيارية.
10.
Output Solution Table (optional) جدول
حل الإخراج (اختياري)
The optional adjustment
solution table. The solution table contains the Root Mean Square (RMS) of the
adjustment error and solution matrix.
جدول حل التعديل الاختياري. يحتوي جدول الحل على
مربع متوسط الجذر (RMS) لخطأ الضبط ومصفوفة
الحل.
11.
Output Solution Point Table (optional) جدول نقطة حل الإخراج (اختياري)
The optional solution
point feature class. The solution points are the final controls points used to
generate the adjustment solution.
فئة ميزة نقطة الحل الاختيارية. نقاط الحل هي نقاط
التحكم النهائية المستخدمة لإنشاء حل الضبط.
12.
Output Flight Path (optional) مسار
رحلة الإخراج (اختياري)
The optional flight path
line feature class.
فئة ميزة خط مسار الرحلة الاختيارية.
13.
Maximum Area Overlap (optional) أقصى
مساحة تداخل (اختياري)
The percentage of
overlap between two images needed to consider them duplicates.
For example, if the
value is 0.9, it means if an image is 90 percent covered by another image, it
will be considered a duplicate and removed.
النسبة المئوية للتداخل بين صورتين اللازمة
لاعتبارها مكررة.
على سبيل المثال ، إذا كانت القيمة 0.9 ، فهذا
يعني أنه إذا كانت الصورة مغطاة بنسبة 90 بالمائة بصورة أخرى ، فسيتم اعتبارها
مكررة وتتم إزالتها.
14.
Minimum Control Point Coverage (optional) الحد الأدنى من تغطية نقطة التحكم (اختياري)
A percentage indicating
the control point's coverage on an image. If the coverage is below the minimum
percentage, the image will be unresolved and removed. The default is 0.2, which
is 20 percent.
نسبة تشير إلى تغطية نقطة التحكم على صورة. إذا
كانت التغطية أقل من النسبة المئوية الدنيا ، فلن يتم حل الصورة وإزالتها. القيمة
الافتراضية هي 0.2 ، وهي 20 بالمائة.
15.
Remove Off-Strip Images (optional) إزالة
الصور خارج الشريط (اختياري)
Controls whether images
will be automatically removed if they are too far from the flight strip.
·
Unchecked—Use all images. This is the default.
·
Checked—Remove images that are too far away from the flight strip.
يتحكم في ما إذا كانت الصور ستتم إزالتها تلقائيًا
إذا كانت بعيدة جدًا عن شريط الرحلة.
• لم يتم التحديد -
استخدم جميع الصور. هذا هو الافتراضي.
• تم التحديد - قم بإزالة
الصور البعيدة جدًا عن شريط الرحلة.
16.
Input Tie Point Table (optional) جدول
نقطة التعادل الإدخال (اختياري)
The tie point table used to compute the camera model. If a tie
point table is not specified, the tool will compute its own tie points and
estimate the camera model.
يستخدم جدول نقطة الربط
لحساب طراز الكاميرا. إذا لم يتم تحديد جدول نقطة التعادل ، ستقوم الأداة بحساب
نقاط الربط الخاصة بها وتقدير طراز الكاميرا.
·
Additional Options (optional)
· Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
Output
Solution Table (optional)
The optional adjustment solution table. The solution table contains the
Root Mean Square (RMS) of the adjustment error and solution matrix.
Output
Solution Point Table (optional)
The optional solution point feature class. The solution points are the
final controls points used to generate the adjustment solution.
Output
Flight Path (optional)
The optional flight path line feature class.
Maximum
Area Overlap (optional)
The percentage of overlap between two images needed to consider them
duplicates.
For example, if the value is 0.9, it means if an image is 90 percent
covered by another image, it will be considered a duplicate and removed.
Minimum
Control Point Coverage (optional)
A percentage indicating the control point's coverage on an image. If the
coverage is below the minimum percentage, the image will be unresolved and
removed. The default is 0.2, which is 20 percent.
Remove
Off-Strip Images (optional)
Controls whether images will be automatically removed if they are too far
from the flight strip.
· Unchecked—Use all images. This is the default.
· Checked—Remove images that are too far away from the flight strip.
Input Tie
Point Table (optional)
The tie point table used to compute the camera model. If a tie point table
is not specified, the tool will compute its own tie points and estimate the
camera model.
Additional
Options (optional)
Additional options for the adjustment engine. These options are only for
use by third-party adjustment engines.
17.
Additional Options (optional) خيارات
إضافية (اختياري)
Additional options for
the adjustment engine. These options are only for use by third-party adjustment
engines.
خيارات إضافية لمحرك الضبط. هذه الخيارات مخصصة
للاستخدام فقط بواسطة محركات تعديل تابعة لجهات خارجية.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق