Make NetCDF Raster Layer and Table View Tools
Make NetCDF Raster Layer
أداة إنشاء طبقة
نقطية من ملف نيت سي دي أف
ArcMap ArcGIS
How to use Make NetCDF
Raster Layer Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة إنشاء طبقة نقطية من ملف نيت سي دي أف ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Make
NetCDF Raster Layer Tool, Multidimension Tools Toolbox
Make NetCDF Raster Layer
Makes a raster layer
from a netCDF file.
يصنع طبقة نقطية من ملف netCDF.
1.
Input netCDF File ادخل ملف نيت سي
دي أف
The input netCDF file.
ملف إدخال netCDF.
Variable
The variable of the netCDF file used to assign cell values to the output
raster. This is the variable that will be displayed, such as temperature or
rainfall.
X
Dimension
A netCDF dimension used to define the x, or longitude, coordinates of the
output layer.
Y
Dimension
A netCDF dimension used to define the y, or latitude, coordinates of the
output layer.
Output
Raster Layer
The name of the output raster layer.
Band
Dimension (optional)
A netCDF dimension used to create bands in the output raster. Set this
dimension if a multiband raster layer is required. For instance, altitude might
be set as the band dimension to create a multiband raster where each band
represents temperature at that altitude.
Dimension
Values (optional)
The value (such as 01/30/05) of the dimension (such as Time) or dimensions
to use when displaying the variable in the output layer. By default, the first
value of the dimension or dimensions will be used. This default value can also
be altered on the netCDF tab of the Layer Properties dialog box.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
2.
Variable المتغير
The variable of the
netCDF file used to assign cell values to the output raster. This is the
variable that will be displayed, such as temperature or rainfall.
متغير ملف netCDF
المستخدم لتعيين قيم الخلية إلى البيانات النقطية للإخراج. هذا هو المتغير الذي
سيتم عرضه ، مثل درجة الحرارة أو هطول الأمطار.
X
Dimension
A netCDF dimension used to define the x, or longitude, coordinates of the
output layer.
Y
Dimension
A netCDF dimension used to define the y, or latitude, coordinates of the
output layer.
Output
Raster Layer
The name of the output raster layer.
Band
Dimension (optional)
A netCDF dimension used to create bands in the output raster. Set this
dimension if a multiband raster layer is required. For instance, altitude might
be set as the band dimension to create a multiband raster where each band
represents temperature at that altitude.
Dimension
Values (optional)
The value (such as 01/30/05) of the dimension (such as Time) or dimensions
to use when displaying the variable in the output layer. By default, the first
value of the dimension or dimensions will be used. This default value can also
be altered on the netCDF tab of the Layer Properties dialog box.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell Registration
(optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
3.
X Dimension البعد س
A netCDF dimension used
to define the x, or longitude, coordinates of the output layer.
بعد netCDF
المستخدم لتعريف إحداثيات x أو
خطوط الطول لطبقة الإخراج.
Y
Dimension
A netCDF dimension used to define the y, or latitude, coordinates of the
output layer.
Output
Raster Layer
The name of the output raster layer.
Band
Dimension (optional)
A netCDF dimension used to create bands in the output raster. Set this
dimension if a multiband raster layer is required. For instance, altitude might
be set as the band dimension to create a multiband raster where each band
represents temperature at that altitude.
Dimension
Values (optional)
The value (such as 01/30/05) of the dimension (such as Time) or dimensions
to use when displaying the variable in the output layer. By default, the first
value of the dimension or dimensions will be used. This default value can also
be altered on the netCDF tab of the Layer Properties dialog box.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
4.
Y Dimension البعد ص
A netCDF dimension used
to define the y, or latitude, coordinates of the output layer.
بُعد netCDF
المستخدم لتحديد إحداثيات y أو خط
العرض لطبقة الإخراج.
Output
Raster Layer
The name of the output raster layer.
Band
Dimension (optional)
A netCDF dimension used to create bands in the output raster. Set this
dimension if a multiband raster layer is required. For instance, altitude might
be set as the band dimension to create a multiband raster where each band
represents temperature at that altitude.
Dimension
Values (optional)
The value (such as 01/30/05) of the dimension (such as Time) or dimensions
to use when displaying the variable in the output layer. By default, the first
value of the dimension or dimensions will be used. This default value can also
be altered on the netCDF tab of the Layer Properties dialog box.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
5.
Output Raster Layer طبقة النقطية
المخرجة
The name of the output
raster layer.
اسم الطبقة النقطية الناتجة.
Band
Dimension (optional)
A netCDF dimension used to create bands in the output raster. Set this
dimension if a multiband raster layer is required. For instance, altitude might
be set as the band dimension to create a multiband raster where each band
represents temperature at that altitude.
Dimension
Values (optional)
The value (such as 01/30/05) of the dimension (such as Time) or dimensions
to use when displaying the variable in the output layer. By default, the first
value of the dimension or dimensions will be used. This default value can also
be altered on the netCDF tab of the Layer Properties dialog box.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
6.
Band Dimension (optional) أبعاد
النطاق (اختياري)
A netCDF dimension used
to create bands in the output raster. Set this dimension if a multiband raster
layer is required. For instance, altitude might be set as the band dimension to
create a multiband raster where each band represents temperature at that altitude.
يتم استخدام بُعد netCDF
لإنشاء نطاقات في البيانات النقطية للإخراج. عيّن هذا البعد إذا كانت طبقة
البيانات النقطية متعددة النطاقات مطلوبة. على سبيل المثال ، يمكن تعيين الارتفاع
على أنه بُعد النطاق لإنشاء خطوط نقطية متعددة النطاقات حيث يمثل كل نطاق درجة الحرارة
عند هذا الارتفاع.
Dimension
Values (optional)
The value (such as 01/30/05) of the dimension (such as Time) or dimensions
to use when displaying the variable in the output layer. By default, the first
value of the dimension or dimensions will be used. This default value can also
be altered on the netCDF tab of the Layer Properties dialog box.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
7.
Dimension Values (optional) قيم
الأبعاد (اختياري)
The value (such as
01/30/05) of the dimension (such as Time) or dimensions to use when displaying
the variable in the output layer. By default, the first value of the dimension
or dimensions will be used. This default value can also be altered on the
netCDF tab of the Layer Properties dialog box.
·
Dimension—A netCDF dimension.
·
Value—The value of the dimension to use.
القيمة (مثل 01/30/05) للبعد (مثل الوقت) أو
الأبعاد المطلوب استخدامها عند عرض المتغير في طبقة الإخراج. بشكل افتراضي ، سيتم
استخدام القيمة الأولى للبعد أو الأبعاد. يمكن أيضًا تغيير هذه القيمة الافتراضية
في علامة التبويب netCDF بمربع حوار خصائص
الطبقة.
• البعد - بعد netCDF.
• القيمة - قيمة البعد
المطلوب استخدامه.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
8.
Value Selection Method (optional) طريقة
تحديد القيمة (اختياري)
Specifies the dimension
value selection method.
·
BY_VALUE—The input value is matched with the actual dimension
value.
·
BY_INDEX—The input value is matched with the position or index of
a dimension value. The index is 0 based; that is, the position starts at 0.
يحدد طريقة اختيار قيمة البعد.
• BY_VALUE - تطابق قيمة الإدخال مع قيمة البعد الفعلية.
• BY_INDEX - تطابق قيمة الإدخال مع موضع أو فهرس قيمة البعد. الفهرس قائم
على 0 ؛ أي أن الموضع يبدأ من 0.
Cell
Registration (optional)
Determines the location of the cell registration.
· CENTER—Cell registration at the center of the cell. This is the default.
· LOWER_LEFT—Cell registration at the lower left of the cell.
· UPPER_LEFT—Cell registration at the upper left of the cell.
9.
Cell Registration (optional) تسجيل
الخلية (اختياري)
Determines the location
of the cell registration.
·
CENTER—Cell registration at the center of the cell. This is the
default.
·
LOWER_LEFT—Cell registration at the lower left of the cell.
·
UPPER_LEFT—Cell registration at the upper left of the cell.
يحدد موقع تسجيل الخلية.
• CENTER -
تسجيل الخلية في مركز الخلية. هذا هو الافتراضي.
• LOWER_LEFT— تسجيل الخلية في أسفل يسار الخلية.
• UPPER_LEFT — تسجيل الخلية أعلى يسار الخلية.
Make NetCDF Table View
أداة إنشاء عرض
جدول من ملف نيت سي دي أف
ArcMap ArcGIS
How to use Make NetCDF
Table View Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة إنشاء عرض جدول من ملف نيت سي دي أف ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Make
NetCDF Table View Tool, Multidimension Tools Toolbox
Make NetCDF Table View
Makes a table view from
a netCDF file.
عمل عرض جدول من ملف netCDF.
1.
Input netCDF File أدخل ملف النيت سي
دي أف
The input netCDF file.
ملف إدخال netCDF.
Variables
The netCDF variable, or variables, used to create fields in the table
view.
Output
Table View
The name of the output table view.
Row
Dimensions (optional)
The netCDF dimension, or dimensions, used to create fields populated with
unique values in the table view. The dimension, or dimensions, set here
determine the number of rows in the table view and the fields that will be
present.
For instance, if stationID is a dimension in the netCDF file and has 10
values, by setting stationID as the dimension to use, 10 rows will be created
in the table view. If stationID and time are used and there are 3 time slices,
30 rows will be created in the table view.
Dimension
Values (optional)
A set of dimension-value pairs used to specify a slice of a
multidimensional variable.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
2.
Variables المتغيرات
The netCDF variable, or
variables, used to create fields in the table view.
متغير netCDF أو
المتغيرات المستخدمة لإنشاء الحقول في عرض الجدول.
Output
Table View
The name of the output table view.
Row
Dimensions (optional)
The netCDF dimension, or dimensions, used to create fields populated with
unique values in the table view. The dimension, or dimensions, set here
determine the number of rows in the table view and the fields that will be
present.
For instance, if stationID is a dimension in the netCDF file and has 10
values, by setting stationID as the dimension to use, 10 rows will be created
in the table view. If stationID and time are used and there are 3 time slices,
30 rows will be created in the table view.
Dimension
Values (optional)
A set of dimension-value pairs used to specify a slice of a
multidimensional variable.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
3.
Output Table View عرض جدول الإخراج
The name of the output table
view.
اسم عرض جدول الإخراج.
Row
Dimensions (optional)
The netCDF dimension, or dimensions, used to create fields populated with
unique values in the table view. The dimension, or dimensions, set here
determine the number of rows in the table view and the fields that will be
present.
For instance, if stationID is a dimension in the netCDF file and has 10
values, by setting stationID as the dimension to use, 10 rows will be created
in the table view. If stationID and time are used and there are 3 time slices,
30 rows will be created in the table view.
Dimension
Values (optional)
A set of dimension-value pairs used to specify a slice of a
multidimensional variable.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
4.
Row Dimensions (optional) أبعاد
الصف (اختياري)
The netCDF dimension, or
dimensions, used to create fields populated with unique values in the table
view. The dimension, or dimensions, set here determine the number of rows in
the table view and the fields that will be present.
For instance, if
stationID is a dimension in the netCDF file and has 10 values, by setting
stationID as the dimension to use, 10 rows will be created in the table view.
If stationID and time are used and there are 3 time slices, 30 rows will be
created in the table view.
بُعد netCDF ، أو
الأبعاد ، المستخدمة لإنشاء الحقول التي يتم ملؤها بقيم فريدة في طريقة عرض
الجدول. يحدد البعد أو الأبعاد المعينة هنا عدد الصفوف في طريقة عرض الجدول
والحقول التي ستكون موجودة.
على سبيل المثال ، إذا كانت stationID عبارة عن بُعد في ملف netCDF وله
10 قيم ، فمن خلال تعيين stationID كبعد
للاستخدام ، سيتم إنشاء 10 صفوف في عرض الجدول. إذا تم استخدام stationID والوقت وكان هناك 3 شرائح زمنية ، فسيتم إنشاء 30 صفًا في عرض
الجدول.
Dimension
Values (optional)
A set of dimension-value pairs used to specify a slice of a
multidimensional variable.
· Dimension—A netCDF dimension.
· Value—The value of the dimension to use.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
5.
Dimension Values (optional) قيم
الأبعاد (اختياري)
A set of dimension-value
pairs used to specify a slice of a multidimensional variable.
·
Dimension—A netCDF dimension.
·
Value—The value of the dimension to use.
مجموعة من أزواج الأبعاد والقيمة المستخدمة لتحديد
شريحة من متغير متعدد الأبعاد.
• البعد - بعد netCDF.
• القيمة - قيمة البعد
المطلوب استخدامه.
Value
Selection Method (optional)
Specifies the dimension value selection method.
· BY_VALUE—The input value is matched with the actual dimension value.
· BY_INDEX—The input value is matched with the position or index of a
dimension value. The index is 0 based; that is, the position starts at 0.
6.
Value Selection Method (optional) طريقة
تحديد القيمة (اختياري)
Specifies the dimension
value selection method.
·
BY_VALUE—The input value is matched with the actual dimension
value.
·
BY_INDEX—The input value is matched with the position or index of
a dimension value. The index is 0 based; that is, the position starts at 0.
يحدد طريقة اختيار قيمة البعد.
• BY_VALUE - تطابق قيمة الإدخال مع قيمة البعد الفعلية.
• BY_INDEX - تطابق قيمة الإدخال مع موضع أو فهرس قيمة البعد. الفهرس قائم
على 0 ؛ أي أن الموضع يبدأ من 0.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق