Geocode Addresses Tool
أداة عناوين الترميز الجغرافي
ArcMap ArcGIS
How to use Geocode
Addresses Tool in ArcToolbox ArcMap ArcGIS??
كيفية استخدام أداة عناوين الترميز الجغرافي ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Geocode
Addresses Tool, Geocoding Tools Toolbox
Geocode Addresses
Geocodes a table of
addresses. This process requires a table that stores the addresses you want to
geocode and an address locator or a composite address locator.
This tool matches the
addresses against the address locator and saves the result for each input
record in a new point feature class. When using the ArcGIS World Geocoding
Service, this operation may consume credits.
تكويد جدول عناوين جغرافيًا. تتطلب هذه العملية
جدولًا يخزن العناوين التي تريد تكويدها جغرافيًا ومحدد موقع العنوان أو محدد موقع
العنوان المركب.
تتطابق هذه الأداة مع العناوين مع محدد موقع
العنوان وتحفظ النتيجة لكل سجل إدخال في فئة معلم نقطة جديدة. عند استخدام ArcGIS World Geocoding Service ، قد تستهلك هذه العملية
أرصدة.
1.
Input Table أدخل الجدول
The table of addresses
to geocodeInput
Address Locator The address locator to
use to geocode the table of addresses. Locators should be stored in a file
folder so you take advantage of new features that are not supported for
locators stored in geodatabases, such as performance improvements, multithreading
capabilities, and suggestions support. ArcGIS 10.4 is the last release to
support storing locators in geodatabases.
جدول العناوين للترميز الجغرافي
·
Input Address Fields
Maps address fields used by the address locator to fields in the input
table of addresses. Select Single Field if the complete address is stored in
one field in the input table, for example, 303 Peachtree St NE, Atlanta, GA
30308. Select Multiple Fields if the input addresses are split into multiple
fields such as Address, City, State, and ZIP for a general United States
address.
Some locators support multiple input addresses fields, such as Address,
Address2, and Address3. In this case, the address component can be separated
into multiple fields, and the address fields will be concatenated together at
the time of geocoding. For example, 100, Main St, and Apt 140 across three
fields, or 100 Main St and Apt 140 across two fields, would both become 100
Main St Apt 140 when geocoding.
Only multiple fields are supported using locators created prior to ArcGIS
10.
Output
Feature Class
The output geocoded feature class or shapefile.
Dynamic
Output Feature Class (optional)
Indicates whether to create a static copy of the address table inside the
geocoded feature class or to create a dynamically updated geocoded feature
class.
· Unchecked—Creates a static copy of the fields input address table in the
output feature class. This is the default.
· Checked—Creates a relationship class between the input address table and
output feature class so that edits to the addresses in the input address table
are automatically updated in the output feature class. This option is available
only if the input address table and output feature class are in the same
geodatabase workspace.
This option is only available if you
have an ArcGIS Desktop Standard or Desktop Advanced licence.
Country
(optional)
Geocoding will be limited to the selected countries. When no country is
used, geocoding will be performed against all supported countries. Making a
country selection will improve the accuracy of geocoding in most cases.
If a field representing countries is in the Input Table and is mapped to
the CountryCode Input Address Field, the country value from the Input Table
will override the Country parameter. The input value should be specified as ISO
3166-1 3-character country codes.
This parameter is not supported for all locators.
Preferred
Location Type (optional)
Specifies the preferred output geometry for PointAddress matches. The
options are the street side location, which can be used for routing, or the
rooftop or parcel centroid for the address. If the preferred location does not
exist in the data, the default location will be returned instead. For geocode
results with Addr_type=PointAddress, the X,Y attribute values describe the
coordinates of the address along the street, while the DisplayX and DisplayY
values describe the rooftop, or building centroid, coordinates.
This parameter is not supported for all locators.
· ADDRESS_LOCATION—Returns geometry for geocode results that could represent
an address location such as rooftop location, parcel centroid, or front door.
· ROUTING_LOCATION—Returns geometry for geocode results that represents a
location close to the side of the street. This is the default.
2.
Input Address Locator محدد عنوان
الإدخال
The address locator to use to geocode the table of addresses.
Locators should be stored in a file folder so you take advantage
of new features that are not supported for locators stored in geodatabases,
such as performance improvements, multithreading capabilities, and suggestions
support. ArcGIS 10.4 is the last release to support storing locators in
geodatabases.
محدد موقع العنوان المراد
استخدامه لترميز جدول العناوين جغرافيًا.
يجب تخزين محددات المواقع
في مجلد ملف حتى تستفيد من الميزات الجديدة غير المدعومة لمحددات المواقع المخزنة
في قواعد البيانات الجغرافية ، مثل تحسينات الأداء وإمكانيات تعدد مؤشرات الترابط
ودعم الاقتراحات. ArcGIS 10.4 هو الإصدار الأخير لدعم
تخزين محددات المواقع في قواعد البيانات الجغرافية.
3.
Input Address Fields أدخل حقول
العناوين
Maps address fields used
by the address locator to fields in the input table of addresses. Select Single
Field if the complete address is stored in one field in the input table, for
example, 303 Peachtree St NE, Atlanta, GA 30308. Select Multiple Fields if the
input addresses are split into multiple fields such as Address, City, State,
and ZIP for a general United States address.
Some locators support
multiple input addresses fields, such as Address, Address2, and Address3. In
this case, the address component can be separated into multiple fields, and the
address fields will be concatenated together at the time of geocoding. For
example, 100, Main St, and Apt 140 across three fields, or 100 Main St and Apt
140 across two fields, would both become 100 Main St Apt 140 when geocoding.
Only multiple fields are
supported using locators created prior to ArcGIS 10.
حقول عناوين الخرائط التي يستخدمها محدد العنوان
للحقول الموجودة في جدول إدخال العناوين. حدد حقل واحد إذا تم تخزين العنوان
الكامل في حقل واحد في جدول الإدخال ، على سبيل المثال ، 303 Peachtree St NE، Atlanta، GA 30308. حدد حقول متعددة إذا تم تقسيم عناوين الإدخال إلى عدة حقول مثل
العنوان ، المدينة ، الولاية ، و ZIP
للحصول على عنوان عام للولايات المتحدة.
تدعم بعض محددات المواقع العديد من حقول عناوين
الإدخال ، مثل العنوان ، والعنوان 2 ، والعنوان 3. في هذه الحالة ، يمكن فصل مكون
العنوان إلى عدة حقول ، وسيتم ربط حقول العنوان معًا في وقت التكويد الجغرافي. على
سبيل المثال ، سيصبح كل من 100 و Main St و Apt 140 عبر ثلاثة حقول ، أو 100 Main St و Apt 140 عبر حقلين ، 100 Main St Apt 140 عند
الترميز الجغرافي.
يتم دعم الحقول المتعددة فقط باستخدام محددات
المواقع التي تم إنشاؤها قبل ArcGIS 10.
Output
Feature Class
The output geocoded feature class or shapefile.
Dynamic
Output Feature Class (optional)
Indicates whether to create a static copy of the address table inside the
geocoded feature class or to create a dynamically updated geocoded feature
class.
· Unchecked—Creates a static copy of the fields input address table in the
output feature class. This is the default.
· Checked—Creates a relationship class between the input address table and
output feature class so that edits to the addresses in the input address table
are automatically updated in the output feature class. This option is available
only if the input address table and output feature class are in the same
geodatabase workspace.
This option is only available if you
have an ArcGIS Desktop Standard or Desktop Advanced licence.
Country
(optional)
Geocoding will be limited to the selected countries. When no country is
used, geocoding will be performed against all supported countries. Making a
country selection will improve the accuracy of geocoding in most cases.
If a field representing countries is in the Input Table and is mapped to
the CountryCode Input Address Field, the country value from the Input Table
will override the Country parameter. The input value should be specified as ISO
3166-1 3-character country codes.
This parameter is not supported for all locators.
Preferred
Location Type (optional)
Specifies the preferred output geometry for PointAddress matches. The
options are the street side location, which can be used for routing, or the
rooftop or parcel centroid for the address. If the preferred location does not
exist in the data, the default location will be returned instead. For geocode
results with Addr_type=PointAddress, the X,Y attribute values describe the
coordinates of the address along the street, while the DisplayX and DisplayY
values describe the rooftop, or building centroid, coordinates.
This parameter is not supported for all locators.
· ADDRESS_LOCATION—Returns geometry for geocode results that could represent
an address location such as rooftop location, parcel centroid, or front door.
· ROUTING_LOCATION—Returns geometry for geocode results that represents a
location close to the side of the street. This is the default.
4.
Output Feature Class فئة ميزة
الإخراج
The output geocoded
feature class or shapefile.
فئة معلم الإخراج المشفر جغرافيًا أو ملف الشكل.
Dynamic
Output Feature Class (optional)
Indicates whether to create a static copy of the address table inside the
geocoded feature class or to create a dynamically updated geocoded feature
class.
· Unchecked—Creates a static copy of the fields input address table in the
output feature class. This is the default.
· Checked—Creates a relationship class between the input address table and
output feature class so that edits to the addresses in the input address table
are automatically updated in the output feature class. This option is available
only if the input address table and output feature class are in the same
geodatabase workspace.
This option is only available if you
have an ArcGIS Desktop Standard or Desktop Advanced licence.
Country
(optional)
Geocoding will be limited to the selected countries. When no country is
used, geocoding will be performed against all supported countries. Making a
country selection will improve the accuracy of geocoding in most cases.
If a field representing countries is in the Input Table and is mapped to
the CountryCode Input Address Field, the country value from the Input Table
will override the Country parameter. The input value should be specified as ISO
3166-1 3-character country codes.
This parameter is not supported for all locators.
Preferred
Location Type (optional)
Specifies the preferred output geometry for PointAddress matches. The
options are the street side location, which can be used for routing, or the
rooftop or parcel centroid for the address. If the preferred location does not
exist in the data, the default location will be returned instead. For geocode
results with Addr_type=PointAddress, the X,Y attribute values describe the
coordinates of the address along the street, while the DisplayX and DisplayY
values describe the rooftop, or building centroid, coordinates.
This parameter is not supported for all locators.
· ADDRESS_LOCATION—Returns geometry for geocode results that could represent
an address location such as rooftop location, parcel centroid, or front door.
· ROUTING_LOCATION—Returns geometry for geocode results that represents a
location close to the side of the street. This is the default.
5.
Dynamic Output Feature Class (optional) فئة ميزات الإخراج الديناميكي (اختياري)
Indicates whether to
create a static copy of the address table inside the geocoded feature class or
to create a dynamically updated geocoded feature class.
·
Unchecked—Creates a static copy of the fields input address table
in the output feature class. This is the default.
·
Checked—Creates a relationship class between the input address
table and output feature class so that edits to the addresses in the input
address table are automatically updated in the output feature class. This
option is available only if the input address table and output feature class
are in the same geodatabase workspace.
This option is only available if you have an ArcGIS Desktop
Standard or Desktop Advanced licence.
يشير إلى ما إذا كان سيتم إنشاء نسخة ثابتة من
جدول العناوين داخل فئة المعالم المشفرة جغرافيًا أو لإنشاء فئة معلم مُرمَّزة
جغرافيًا محدَّثة ديناميكيًا.
• غير محدد - يُنشئ نسخة
ثابتة من جدول عنوان إدخال الحقول في فئة معلم الإخراج. هذا هو الافتراضي.
• تم التحديد - ينشئ فئة
علاقة بين جدول عنوان الإدخال وفئة ميزة الإخراج بحيث يتم تحديث عمليات التحرير
على العناوين في جدول عنوان الإدخال تلقائيًا في فئة معلم الإخراج. يتوفر هذا
الخيار فقط إذا كان جدول عنوان الإدخال وفئة ميزة الإخراج في نفس مساحة عمل قاعدة
البيانات الجغرافية.
يتوفر هذا الخيار فقط إذا كان لديك ترخيص ArcGIS Desktop Standard أو Desktop
Advanced.
Country
(optional)
Geocoding will be limited to the selected countries. When no country is
used, geocoding will be performed against all supported countries. Making a
country selection will improve the accuracy of geocoding in most cases.
If a field representing countries is in the Input Table and is mapped to
the CountryCode Input Address Field, the country value from the Input Table
will override the Country parameter. The input value should be specified as ISO
3166-1 3-character country codes.
This parameter is not supported for all locators.
Preferred
Location Type (optional)
Specifies the preferred output geometry for PointAddress matches. The
options are the street side location, which can be used for routing, or the
rooftop or parcel centroid for the address. If the preferred location does not
exist in the data, the default location will be returned instead. For geocode
results with Addr_type=PointAddress, the X,Y attribute values describe the
coordinates of the address along the street, while the DisplayX and DisplayY
values describe the rooftop, or building centroid, coordinates.
This parameter is not supported for all locators.
· ADDRESS_LOCATION—Returns geometry for geocode results that could represent
an address location such as rooftop location, parcel centroid, or front door.
· ROUTING_LOCATION—Returns geometry for geocode results that represents a
location close to the side of the street. This is the default.
6.
Country (optional) الدولة (اختياري)
Geocoding will be
limited to the selected countries. When no country is used, geocoding will be
performed against all supported countries. Making a country selection will
improve the accuracy of geocoding in most cases.
If a field representing
countries is in the Input Table and is mapped to the CountryCode Input Address
Field, the country value from the Input Table will override the Country
parameter. The input value should be specified as ISO 3166-1 3-character
country codes.
This parameter is not
supported for all locators.
سيقتصر الترميز الجغرافي على البلدان المختارة. في
حالة عدم استخدام أي بلد ، سيتم تنفيذ التكويد الجغرافي على جميع البلدان
المدعومة. سيؤدي اختيار البلد إلى تحسين دقة الترميز الجغرافي في معظم الحالات.
إذا كان هناك حقل يمثل البلدان في جدول الإدخال
وتم تعيينه إلى حقل عنوان إدخال رمز البلد ، فستتجاوز قيمة البلد من جدول الإدخال
معلمة البلد. يجب تحديد قيمة الإدخال كرموز بلدان مكونة من 3 أحرف ISO 3166-1.
هذه المعلمة غير مدعومة لجميع محددات المواقع.
Preferred
Location Type (optional)
Specifies the preferred output geometry for PointAddress matches. The
options are the street side location, which can be used for routing, or the
rooftop or parcel centroid for the address. If the preferred location does not
exist in the data, the default location will be returned instead. For geocode
results with Addr_type=PointAddress, the X,Y attribute values describe the
coordinates of the address along the street, while the DisplayX and DisplayY
values describe the rooftop, or building centroid, coordinates.
This parameter is not supported for all locators.
· ADDRESS_LOCATION—Returns geometry for geocode results that could represent
an address location such as rooftop location, parcel centroid, or front door.
· ROUTING_LOCATION—Returns geometry for geocode results that represents a
location close to the side of the street. This is the default.
7.
Preferred Location Type (optional) نوع
الموقع المفضل (اختياري)
Specifies the preferred
output geometry for PointAddress matches. The options are the street side
location, which can be used for routing, or the rooftop or parcel centroid for
the address. If the preferred location does not exist in the data, the default
location will be returned instead. For geocode results with
Addr_type=PointAddress, the X,Y attribute values describe the coordinates of
the address along the street, while the DisplayX and DisplayY values describe
the rooftop, or building centroid, coordinates.
This parameter is not
supported for all locators.
·
ADDRESS_LOCATION—Returns geometry for geocode results that could
represent an address location such as rooftop location, parcel centroid, or
front door.
·
ROUTING_LOCATION—Returns geometry for geocode results that
represents a location close to the side of the street. This is the default.
يحدد هندسة الإخراج المفضلة لمطابقات PointAddress. الخيارات هي موقع جانب الشارع ، والذي يمكن استخدامه للتوجيه ،
أو السطح أو النقطية المركزية للعنوان. إذا كان الموقع المفضل غير موجود في
البيانات ، فسيتم إرجاع الموقع الافتراضي بدلاً من ذلك. بالنسبة لنتائج الترميز
الجغرافي باستخدام Addr_type
= PointAddress ، تصف
قيم السمة X و Y إحداثيات العنوان على
طول الشارع ، بينما تصف قيم DisplayX و DisplayY إحداثيات السطح أو المبنى المركزي.
هذه المعلمة غير مدعومة لجميع محددات المواقع.
• ADDRESS_LOCATION - إرجاع الشكل الهندسي لنتائج الترميز الجغرافي التي يمكن أن تمثل
موقع عنوان مثل موقع على السطح أو نقطة مركزية للطرد أو باب أمامي.
• ROUTING_LOCATION - إرجاع الشكل الهندسي لنتائج الترميز الجغرافي التي تمثل موقعًا
قريبًا من جانب الشارع. هذا هو الافتراضي.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق