Package Map Tool
أداة خريطة الحزمة
ArcMap ArcGIS
How to Package Map Tool in
ArcToolbox ArcMap ArcGIS??
كيفية استخدام أداة خريطة الحزمةArcToolbox ArcMap
ArcGIS ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Package
Map Tool, Package Toolset, Data Management Tools Toolbox
Package Map
Packages a map document
and all referenced data sources to create a single compressed .mpk file.
يحزم مستند خريطة وجميع مصادر البيانات المرجعية
لإنشاء ملف .mpk واحد مضغوط.
1.
Input Map Document أدخل مستند
الخريطة
The map document to be
packaged.
وثيقة الخريطة المراد تعبئتها.
Output
File
The output map package (.mpk).
Convert
data to file geodatabase (optional)
Specifies whether input layers will be converted to a file geodatabase or
preserve their original format.
· Checked—All data will be converted to a file geodatabase. This parameter
does not apply to enterprise geodatabase data sources. To include enterprise
geodatabase data, check the Include Enterprise geodatabase data instead of
referencing the data parameter.
· Unchecked—Data formats will be preserved when possible. This is the
default. The exception to this rule are formats that are not supported in a 64x
environment (personal geodatabase (.mdb) data, VPF data, and tables based on
Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS cannot
write out natively (ADRG, CADRG/ECRG, CIB, and RPF).
Include
Enterprise Geodatabase data instead of referencing the data (optional)
Specifies whether input enterprise geodatabase layers will be converted
into a file geodatabase or preserve their original format.
· Checked—All enterprise geodatabase data sources will be converted to a
file geodatabase. This is the default.
· Unchecked—All enterprise geodatabase data sources will be preserved and
will be referenced in the resulting package.
Extent
(optional)
Specifies the extent that will be used to select or clip features.
· Default—The extent will be based on the maximum extent of all
participating layers. This is the default.
· Union of Inputs—The maximum extent of all inputs.
· Intersection of Inputs—The minimum area common to all inputs.
· As Specified Below—Specify the minimum and maximum extent values.
· Same as Display—Extent is equal to the data frame or visible display.
Apply
Extent only to enterprise geodatabase layers (optional)
Determines whether specified extent will be applied to all layers or only
to enterprise geodatabase layers.
· Unchecked—Extent will be applied to all layers. This is the default.
· Checked—Extent will be applied to enterprise geodatabase layers only.
Support
ArcGIS Runtime (optional)
Specifies whether the package will support ArcGIS Runtime. To support
ArcGIS Runtime, all data sources will be converted to a file geodatabase, and a
.msd file will be created in the output package.
· Unchecked—Package will not support ArcGIS Runtime.
· Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages can only be made with a 10.x version of ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags (optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
2.
Output File ملف الإخراج
The output map package
(.mpk).
حزمة مخطط الإخراج (.mpk).
Convert
data to file geodatabase (optional)
Specifies whether input layers will be converted to a file geodatabase or
preserve their original format.
· Checked—All data will be converted to a file geodatabase. This parameter
does not apply to enterprise geodatabase data sources. To include enterprise
geodatabase data, check the Include Enterprise geodatabase data instead of
referencing the data parameter.
· Unchecked—Data formats will be preserved when possible. This is the
default. The exception to this rule are formats that are not supported in a 64x
environment (personal geodatabase (.mdb) data, VPF data, and tables based on
Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS cannot
write out natively (ADRG, CADRG/ECRG, CIB, and RPF).
Include
Enterprise Geodatabase data instead of referencing the data (optional)
Specifies whether input enterprise geodatabase layers will be converted into
a file geodatabase or preserve their original format.
· Checked—All enterprise geodatabase data sources will be converted to a
file geodatabase. This is the default.
· Unchecked—All enterprise geodatabase data sources will be preserved and
will be referenced in the resulting package.
Extent
(optional)
Specifies the extent that will be used to select or clip features.
· Default—The extent will be based on the maximum extent of all
participating layers. This is the default.
· Union of Inputs—The maximum extent of all inputs.
· Intersection of Inputs—The minimum area common to all inputs.
· As Specified Below—Specify the minimum and maximum extent values.
· Same as Display—Extent is equal to the data frame or visible display.
Apply
Extent only to enterprise geodatabase layers (optional)
Determines whether specified extent will be applied to all layers or only
to enterprise geodatabase layers.
· Unchecked—Extent will be applied to all layers. This is the default.
· Checked—Extent will be applied to enterprise geodatabase layers only.
Support
ArcGIS Runtime (optional)
Specifies whether the package will support ArcGIS Runtime. To support
ArcGIS Runtime, all data sources will be converted to a file geodatabase, and a
.msd file will be created in the output package.
· Unchecked—Package will not support ArcGIS Runtime.
· Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages can only be made with a 10.x version of ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with previous
versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags
(optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
3.
Convert data to file geodatabase (optional) تحويل البيانات إلى ملف قاعدة بيانات جغرافية (اختياري)
Specifies whether input
layers will be converted to a file geodatabase or preserve their original
format.
·
Checked—All data will be converted to a file geodatabase. This
parameter does not apply to enterprise geodatabase data sources. To include
enterprise geodatabase data, check the Include Enterprise geodatabase data
instead of referencing the data parameter.
·
Unchecked—Data formats will be preserved when possible. This is
the default. The exception to this rule are formats that are not supported in a
64x environment (personal geodatabase (.mdb) data, VPF data, and tables based
on Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS
cannot write out natively (ADRG, CADRG/ECRG, CIB, and RPF).
يحدد ما إذا كان سيتم تحويل طبقات الإدخال إلى
قاعدة بيانات جغرافية للملف أو الاحتفاظ بتنسيقها الأصلي.
• تم التحديد - سيتم
تحويل جميع البيانات إلى قاعدة بيانات جغرافية ملف. لا تنطبق هذه المعلمة على
مصادر بيانات قاعدة البيانات الجغرافية الخاصة بالمؤسسة. لتضمين بيانات قاعدة
البيانات الجغرافية للمؤسسة ، تحقق من تضمين بيانات قاعدة البيانات الجغرافية
للمؤسسة بدلاً من الرجوع إلى معلمة البيانات.
• غير محدد - سيتم
الاحتفاظ بتنسيقات البيانات عندما يكون ذلك ممكنًا. هذا هو الافتراضي. يُستثنى من
هذه القاعدة التنسيقات غير المدعومة في بيئة 64x
(بيانات قاعدة البيانات الجغرافية الشخصية (.mdb)
وبيانات VPF والجداول المستندة إلى جداول بيانات Excel أو
اتصالات OLEDB) وتنسيقات البيانات
النقطية التي لا يستطيع ArcGIS كتابتها محليًا (ADRG و CADRG / ECRG و CIB و RPF).
Include
Enterprise Geodatabase data instead of referencing the data (optional)
Specifies whether input enterprise geodatabase layers will be converted
into a file geodatabase or preserve their original format.
· Checked—All enterprise geodatabase data sources will be converted to a
file geodatabase. This is the default.
· Unchecked—All enterprise geodatabase data sources will be preserved and
will be referenced in the resulting package.
Extent
(optional)
Specifies the extent that will be used to select or clip features.
· Default—The extent will be based on the maximum extent of all
participating layers. This is the default.
· Union of Inputs—The maximum extent of all inputs.
· Intersection of Inputs—The minimum area common to all inputs.
· As Specified Below—Specify the minimum and maximum extent values.
· Same as Display—Extent is equal to the data frame or visible display.
Apply
Extent only to enterprise geodatabase layers (optional)
Determines whether specified extent will be applied to all layers or only
to enterprise geodatabase layers.
· Unchecked—Extent will be applied to all layers. This is the default.
· Checked—Extent will be applied to enterprise geodatabase layers only.
Support
ArcGIS Runtime (optional)
Specifies whether the package will support ArcGIS Runtime. To support
ArcGIS Runtime, all data sources will be converted to a file geodatabase, and a
.msd file will be created in the output package.
· Unchecked—Package will not support ArcGIS Runtime.
· Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages can only be made with a 10.x version of ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags
(optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
4.
Include Enterprise Geodatabase data instead of referencing
the data (optional) قم بتضمين بيانات قاعدة البيانات
الجغرافية للمؤسسة بدلاً من الرجوع إلى البيانات (اختياري)
Specifies whether input
enterprise geodatabase layers will be converted into a file geodatabase or
preserve their original format.
·
Checked—All enterprise geodatabase data sources will be converted
to a file geodatabase. This is the default.
·
Unchecked—All enterprise geodatabase data sources will be
preserved and will be referenced in the resulting package.
يحدد ما إذا كان سيتم تحويل طبقات قاعدة البيانات
الجغرافية الخاصة بالمؤسسة المدخلة إلى قاعدة بيانات جغرافية للملف أو ستحتفظ
بتنسيقها الأصلي.
• تم التحديد - سيتم
تحويل جميع مصادر بيانات قاعدة البيانات الجغرافية الخاصة بالمؤسسة إلى قاعدة
بيانات جغرافية للملف. هذا هو الافتراضي.
• غير محدد - سيتم
الاحتفاظ بجميع مصادر بيانات قاعدة البيانات الجغرافية الخاصة بالمؤسسة وسيتم
الرجوع إليها في الحزمة الناتجة.
Extent
(optional)
Specifies the extent that will be used to select or clip features.
· Default—The extent will be based on the maximum extent of all
participating layers. This is the default.
· Union of Inputs—The maximum extent of all inputs.
· Intersection of Inputs—The minimum area common to all inputs.
· As Specified Below—Specify the minimum and maximum extent values.
· Same as Display—Extent is equal to the data frame or visible display.
Apply
Extent only to enterprise geodatabase layers (optional)
Determines whether specified extent will be applied to all layers or only
to enterprise geodatabase layers.
· Unchecked—Extent will be applied to all layers. This is the default.
· Checked—Extent will be applied to enterprise geodatabase layers only.
Support
ArcGIS Runtime (optional)
Specifies whether the package will support ArcGIS Runtime. To support
ArcGIS Runtime, all data sources will be converted to a file geodatabase, and a
.msd file will be created in the output package.
· Unchecked—Package will not support ArcGIS Runtime.
· Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages can only be made with a 10.x version of ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags
(optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
5.
Extent (optional) المدى (اختياري)
Specifies the extent
that will be used to select or clip features.
·
Default—The extent will be based on the maximum extent of all
participating layers. This is the default.
·
Union of Inputs—The maximum extent of all inputs.
·
Intersection of Inputs—The minimum area common to all inputs.
·
As Specified Below—Specify the minimum and maximum extent values.
·
Same as Display—Extent is equal to the data frame or visible
display.
يحدد المدى الذي سيتم استخدامه لتحديد الميزات أو
قصها.
• افتراضي - سيعتمد المدى
على أقصى مدى لجميع الطبقات المشاركة. هذا هو الافتراضي.
• اتحاد المدخلات - أقصى
مدى لجميع المدخلات.
• تقاطع المدخلات -
المنطقة الدنيا المشتركة لجميع المدخلات.
• كما هو محدد أدناه -
حدد قيم الحد الأدنى والأقصى.
• نفس العرض - المدى
يساوي إطار البيانات أو العرض المرئي.
Apply
Extent only to enterprise geodatabase layers (optional)
Determines whether specified extent will be applied to all layers or only
to enterprise geodatabase layers.
· Unchecked—Extent will be applied to all layers. This is the default.
· Checked—Extent will be applied to enterprise geodatabase layers only.
Support
ArcGIS Runtime (optional)
Specifies whether the package will support ArcGIS Runtime. To support
ArcGIS Runtime, all data sources will be converted to a file geodatabase, and a
.msd file will be created in the output package.
· Unchecked—Package will not support ArcGIS Runtime.
· Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages can only be made with a 10.x version of ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags
(optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
6.
Apply Extent only to enterprise geodatabase layers
(optional) تطبيق النطاق فقط على طبقات قاعدة البيانات
الجغرافية الخاصة بالمؤسسة (اختياري)
Determines whether
specified extent will be applied to all layers or only to enterprise
geodatabase layers.
·
Unchecked—Extent will be applied to all layers. This is the
default.
·
Checked—Extent will be applied to enterprise geodatabase layers
only.
يحدد ما إذا كان النطاق المحدد سيتم تطبيقه على كل
الطبقات أم فقط على طبقات قاعدة البيانات الجغرافية الخاصة بالمؤسسة.
• غير محدد - سيتم تطبيق
النطاق على جميع الطبقات. هذا هو الافتراضي.
• تم التحديد - سيتم
تطبيق النطاق على طبقات قاعدة البيانات الجغرافية للمؤسسة فقط.
Support
ArcGIS Runtime (optional)
Specifies whether the package will support ArcGIS Runtime. To support
ArcGIS Runtime, all data sources will be converted to a file geodatabase, and a
.msd file will be created in the output package.
· Unchecked—Package will not support ArcGIS Runtime.
· Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages can only be made with a 10.x version of ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags
(optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
7.
Support ArcGIS Runtime (optional) الدعم
(اختياري)
Specifies whether the
package will support ArcGIS Runtime. To support ArcGIS Runtime, all data
sources will be converted to a file geodatabase, and a .msd file will be
created in the output package.
·
Unchecked—Package will not support ArcGIS Runtime.
·
Checked—Output package will support ArcGIS Runtime.
Runtime enabled packages
can only be made with a 10.x version of ArcGIS.
يحدد ما إذا كانت الحزمة ستدعم ArcGIS Runtime. لدعم ArcGIS
Runtime ،
سيتم تحويل جميع مصادر البيانات إلى قاعدة بيانات جغرافية ملف ، وسيتم إنشاء ملف msd في
حزمة الإخراج.
• غير محدد - لن تدعم
الحزمة ArcGIS Runtime.
• تم التحديد - ستدعم
حزمة الإخراج ArcGIS Runtime.
لا يمكن إنشاء الحزم الممكّنة لوقت التشغيل إلا
بإصدار 10.x من ArcGIS.
Reference
all data for Runtime (optional)
Checking this option will create a package that references the data needed
rather than copying the data. This is valuable when trying to package large
datasets that are available from a central location within an organization.
· Checked—Creates a package that references the data needed rather than
copying the data.
· Unchecked— Creates a package that contains all needed data. This is the
default.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags (optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
8.
Reference all data for Runtime (optional) الرجوع إلى كافة البيانات الخاصة بوقت التشغيل (اختياري)
Checking this option
will create a package that references the data needed rather than copying the
data. This is valuable when trying to package large datasets that are available
from a central location within an organization.
·
Checked—Creates a package that references the data needed rather
than copying the data.
·
Unchecked— Creates a package that contains all needed data. This
is the default.
سيؤدي تحديد هذا الخيار إلى إنشاء حزمة تشير إلى
البيانات المطلوبة بدلاً من نسخ البيانات. يعد هذا أمرًا ذا قيمة عند محاولة تجميع
مجموعات البيانات الكبيرة المتوفرة من موقع مركزي داخل المؤسسة.
• تم التحقق منه - ينشئ
حزمة تشير إلى البيانات المطلوبة بدلاً من نسخ البيانات.
• غير محدد - يُنشئ حزمة
تحتوي على جميع البيانات المطلوبة. هذا هو الافتراضي.
Package
version (optional)
Specifies the version of the geodatabases that will be created in the
resulting package. Specifying a version allows packages to be shared with
previous versions of ArcGIS and supports backward compatibility.
A package saved to a previous version may lose properties available only
in the newer version.
· ALL — Package will contain geodatabases and a map document compatible with
all versions (10.0 and later).
· CURRENT— Package will contain geodatabases and a map document compatible
with the version of the current release.
· 10.5—Package will contain geodatabases and a map document compatible with
version 10.5.
· 10.4—Package will contain geodatabases and a map document compatible with
version 10.4.
· 10.3—Package will contain geodatabases and a map document compatible with
version 10.3.
· 10.2—Package will contain geodatabases and a map document compatible with
version 10.2.
· 10.1—Package will contain geodatabases and a map document compatible with
version 10.1.
· 10—Package will contain geodatabases and a map document compatible with
version 10.0.
Additional
Files (optional)
Adds additional files to a package. Additional files, such as .doc, .txt,
.pdf, and so on, are used to provide more information about the contents and
purpose of the package.
Summary
(optional)
Adds summary information to the properties of the package.
Tags
(optional)
Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
9.
Package version (optional) إصدار
الحزمة (اختياري)
Specifies the version of
the geodatabases that will be created in the resulting package. Specifying a
version allows packages to be shared with previous versions of ArcGIS and
supports backward compatibility.
A package saved to a
previous version may lose properties available only in the newer version.
·
ALL — Package will contain geodatabases and a map document
compatible with all versions (10.0 and later).
·
CURRENT— Package will contain geodatabases and a map document
compatible with the version of the current release.
·
10.5—Package will contain geodatabases and a map document
compatible with version 10.5.
يحدد إصدار قواعد البيانات الجغرافية التي سيتم
إنشاؤها في الحزمة الناتجة. يسمح تحديد الإصدار بمشاركة الحزم مع الإصدارات
السابقة من ArcGIS ويدعم التوافق مع
الإصدارات السابقة.
قد تفقد الحزمة المحفوظة في إصدار سابق الخصائص
المتوفرة فقط في الإصدار الأحدث.
• الكل - ستحتوي الحزمة
على قواعد بيانات جغرافية ووثيقة خريطة متوافقة مع جميع الإصدارات (10.0 وما
بعدها).
• CURRENT - ستحتوي الحزمة على قواعد بيانات جغرافية ووثيقة خريطة متوافقة
مع إصدار الإصدار الحالي.
• 10.5 — ستحتوي الحزمة
على قواعد بيانات جغرافية ووثيقة خريطة متوافقة مع الإصدار 10.5.
10.
Additional Files (optional) ملفات
إضافية (اختياري)
Adds additional files to a package. Additional
files, such as .doc, .txt, .pdf, and so on, are used to provide more
information about the contents and purpose of the package.
يضيف ملفات إضافية إلى الحزمة. تُستخدم الملفات
الإضافية ، مثل .doc و .txt و .pdf وما
إلى ذلك ، لتوفير مزيد من المعلومات حول محتويات الحزمة والغرض منها.
·
Summary (optional)
· Adds summary information to the properties of the package.
·
Tags (optional)
· Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
11.
Summary (optional) ملخص (اختياري)
Adds summary information to the properties of
the package.
يضيف معلومات موجزة إلى خصائص الحزمة.
·
Tags (optional)
· Adds tag information to the properties of the package. Multiple tags can
be added or separated by a comma or semicolon.
12.
Tags (optional) العلامات (اختياري)
Adds tag information to the properties of the
package. Multiple tags can be added or separated by a comma or semicolon.
يضيف معلومات العلامة إلى خصائص الحزمة. يمكن
إضافة علامات متعددة أو فصلها بفاصلة أو فاصلة منقوطة.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق