موقع GIS for WE نظم المعلومات الجغرافية (GIS) وبرامج ArcGIS

Consolidate Result Tool

أداة توحيد النتيجة

ArcMap ArcGIS

How to Consolidate Result Tool in ArcToolbox ArcMap ArcGIS??

كيفية استخدام أداة توحيد النتيجةArcToolbox ArcMap ArcGIS   ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Consolidate Result Tool, Package Toolset, Data Management Tools Toolbox

 

Consolidate Result

Consolidates one or more geoprocessing results into a specified output folder.

If the specified folder does not exist, a new folder will be created.

يدمج نتيجة معالجة جغرافية واحدة أو أكثر في مجلد إخراج محدد.

في حالة عدم وجود المجلد المحدد ، سيتم إنشاء مجلد جديد.

Result

The geoprocessing result to be consolidated.

Results that are added as input can either be a result file (.rlt) or a result from the Results window.

Output Folder

The output folder that will contain the consolidated tools and data.

Convert data to file geodatabase (optional)

Specifies whether input layers will be converted to a file geodatabase or preserve their original format.

·      Checked—All data will be converted to a file geodatabase. This parameter does not apply to enterprise geodatabase data sources. To include enterprise geodatabase data, check the Include Enterprise geodatabase data instead of referencing the data parameter.

·      Unchecked—Data formats will be preserved when possible. This is the default. The exception to this rule are formats that are not supported in a 64x environment (personal geodatabase (.mdb) data, VPF data, and tables based on Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS cannot write out natively (ADRG, CADRG/ECRG, CIB, and RPF).

Include Enterprise Geodatabase data instead of referencing the data (optional)

Specifies whether input enterprise geodatabase layers will be converted into a file geodatabase or preserve their original format.

·      Checked—All enterprise geodatabase data sources will be converted to a file geodatabase. This is the default.

·      Unchecked—All enterprise geodatabase data sources will be preserved and will be referenced in the resulting package.

Extent (optional)

Specifies the extent that will be used to select or clip features.

·      Default—The extent will be based on the maximum extent of all participating layers. This is the default.

·      Union of Inputs—The maximum extent of all inputs.

·      Intersection of Inputs—The minimum area common to all inputs.

·      As Specified Below—Specify the minimum and maximum extent values.

·      Same as Display—Extent is equal to the data frame or visible display.

Apply Extent only to enterprise geodatabase layers (optional)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

·      Unchecked—Extent will be applied to all layers. This is the default.

·      Checked—Extent will be applied to enterprise geodatabase layers only.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

1.    Result النتيجة

The geoprocessing result to be consolidated.

Results that are added as input can either be a result file (.rlt) or a result from the Results window.

يتم توحيد نتيجة المعالجة الجغرافية.

النتائج التي تمت إضافتها كمدخلات يمكن أن تكون إما ملف نتيجة (.rlt) أو نتيجة من نافذة النتائج.

Output Folder

The output folder that will contain the consolidated tools and data.

Convert data to file geodatabase (optional)

Specifies whether input layers will be converted to a file geodatabase or preserve their original format.

·      Checked—All data will be converted to a file geodatabase. This parameter does not apply to enterprise geodatabase data sources. To include enterprise geodatabase data, check the Include Enterprise geodatabase data instead of referencing the data parameter.

·      Unchecked—Data formats will be preserved when possible. This is the default. The exception to this rule are formats that are not supported in a 64x environment (personal geodatabase (.mdb) data, VPF data, and tables based on Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS cannot write out natively (ADRG, CADRG/ECRG, CIB, and RPF).

Include Enterprise Geodatabase data instead of referencing the data (optional)

Specifies whether input enterprise geodatabase layers will be converted into a file geodatabase or preserve their original format.

·      Checked—All enterprise geodatabase data sources will be converted to a file geodatabase. This is the default.

·      Unchecked—All enterprise geodatabase data sources will be preserved and will be referenced in the resulting package.

Extent (optional)

Specifies the extent that will be used to select or clip features.

·      Default—The extent will be based on the maximum extent of all participating layers. This is the default.

·      Union of Inputs—The maximum extent of all inputs.

·      Intersection of Inputs—The minimum area common to all inputs.

·      As Specified Below—Specify the minimum and maximum extent values.

·      Same as Display—Extent is equal to the data frame or visible display.

Apply Extent only to enterprise geodatabase layers (optional)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

·      Unchecked—Extent will be applied to all layers. This is the default.

·      Checked—Extent will be applied to enterprise geodatabase layers only.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

2.    Output Folder مجلد الإخراج

The output folder that will contain the consolidated tools and data.

مجلد الإخراج الذي سيحتوي على الأدوات والبيانات المدمجة.

Convert data to file geodatabase (optional)

Specifies whether input layers will be converted to a file geodatabase or preserve their original format.

·      Checked—All data will be converted to a file geodatabase. This parameter does not apply to enterprise geodatabase data sources. To include enterprise geodatabase data, check the Include Enterprise geodatabase data instead of referencing the data parameter.

·      Unchecked—Data formats will be preserved when possible. This is the default. The exception to this rule are formats that are not supported in a 64x environment (personal geodatabase (.mdb) data, VPF data, and tables based on Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS cannot write out natively (ADRG, CADRG/ECRG, CIB, and RPF).

Include Enterprise Geodatabase data instead of referencing the data (optional)

Specifies whether input enterprise geodatabase layers will be converted into a file geodatabase or preserve their original format.

·      Checked—All enterprise geodatabase data sources will be converted to a file geodatabase. This is the default.

·      Unchecked—All enterprise geodatabase data sources will be preserved and will be referenced in the resulting package.

Extent (optional)

Specifies the extent that will be used to select or clip features.

·      Default—The extent will be based on the maximum extent of all participating layers. This is the default.

·      Union of Inputs—The maximum extent of all inputs.

·      Intersection of Inputs—The minimum area common to all inputs.

·      As Specified Below—Specify the minimum and maximum extent values.

·      Same as Display—Extent is equal to the data frame or visible display.

Apply Extent only to enterprise geodatabase layers (optional)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

·      Unchecked—Extent will be applied to all layers. This is the default.

·      Checked—Extent will be applied to enterprise geodatabase layers only.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

3.    Convert data to file geodatabase (optional) تحويل البيانات إلى ملف قاعدة بيانات جغرافية (اختياري)

Specifies whether input layers will be converted to a file geodatabase or preserve their original format.

· Checked—All data will be converted to a file geodatabase. This parameter does not apply to enterprise geodatabase data sources. To include enterprise geodatabase data, check the Include Enterprise geodatabase data instead of referencing the data parameter.

· Unchecked—Data formats will be preserved when possible. This is the default. The exception to this rule are formats that are not supported in a 64x environment (personal geodatabase (.mdb) data, VPF data, and tables based on Excel spreadsheets or OLEDB connections) and raster formats that ArcGIS cannot write out natively (ADRG, CADRG/ECRG, CIB, and RPF).

يحدد ما إذا كان سيتم تحويل طبقات الإدخال إلى قاعدة بيانات جغرافية للملف أو الاحتفاظ بتنسيقها الأصلي.

• تم التحديد - سيتم تحويل جميع البيانات إلى قاعدة بيانات جغرافية ملف. لا تنطبق هذه المعلمة على مصادر بيانات قاعدة البيانات الجغرافية الخاصة بالمؤسسة. لتضمين بيانات قاعدة البيانات الجغرافية للمؤسسة ، تحقق من تضمين بيانات قاعدة البيانات الجغرافية للمؤسسة بدلاً من الرجوع إلى معلمة البيانات.

• غير محدد - سيتم الاحتفاظ بتنسيقات البيانات عندما يكون ذلك ممكنًا. هذا هو الافتراضي. يُستثنى من هذه القاعدة التنسيقات غير المدعومة في بيئة 64x (بيانات قاعدة البيانات الجغرافية الشخصية (.mdb) وبيانات VPF والجداول المستندة إلى جداول بيانات Excel أو اتصالات OLEDB) وتنسيقات البيانات النقطية التي لا يستطيع ArcGIS كتابتها محليًا (ADRG و CADRG / ECRG و CIB و RPF).

Include Enterprise Geodatabase data instead of referencing the data (optional)

Specifies whether input enterprise geodatabase layers will be converted into a file geodatabase or preserve their original format.

·      Checked—All enterprise geodatabase data sources will be converted to a file geodatabase. This is the default.

·      Unchecked—All enterprise geodatabase data sources will be preserved and will be referenced in the resulting package.

Extent (optional)

Specifies the extent that will be used to select or clip features.

·      Default—The extent will be based on the maximum extent of all participating layers. This is the default.

·      Union of Inputs—The maximum extent of all inputs.

·      Intersection of Inputs—The minimum area common to all inputs.

·      As Specified Below—Specify the minimum and maximum extent values.

·      Same as Display—Extent is equal to the data frame or visible display.

Apply Extent only to enterprise geodatabase layers (optional)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

·      Unchecked—Extent will be applied to all layers. This is the default.

·      Checked—Extent will be applied to enterprise geodatabase layers only.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

4.    Include Enterprise Geodatabase data instead of referencing the data (optional) قم بتضمين بيانات قاعدة البيانات الجغرافية للمؤسسة بدلاً من الرجوع إلى البيانات (اختياري)

Specifies whether input enterprise geodatabase layers will be converted into a file geodatabase or preserve their original format.

· Checked—All enterprise geodatabase data sources will be converted to a file geodatabase. This is the default.

· Unchecked—All enterprise geodatabase data sources will be preserved and will be referenced in the resulting package.

يحدد ما إذا كان سيتم تحويل طبقات قاعدة البيانات الجغرافية الخاصة بالمؤسسة المدخلة إلى قاعدة بيانات جغرافية للملف أو ستحتفظ بتنسيقها الأصلي.

• تم التحديد - سيتم تحويل جميع مصادر بيانات قاعدة البيانات الجغرافية الخاصة بالمؤسسة إلى قاعدة بيانات جغرافية للملف. هذا هو الافتراضي.

• غير محدد - سيتم الاحتفاظ بجميع مصادر بيانات قاعدة البيانات الجغرافية الخاصة بالمؤسسة وسيتم الرجوع إليها في الحزمة الناتجة.

Extent (optional)

Specifies the extent that will be used to select or clip features.

·      Default—The extent will be based on the maximum extent of all participating layers. This is the default.

·      Union of Inputs—The maximum extent of all inputs.

·      Intersection of Inputs—The minimum area common to all inputs.

·      As Specified Below—Specify the minimum and maximum extent values.

·      Same as Display—Extent is equal to the data frame or visible display.

Apply Extent only to enterprise geodatabase layers (optional)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

·      Unchecked—Extent will be applied to all layers. This is the default.

·      Checked—Extent will be applied to enterprise geodatabase layers only.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

5.    Extent (optional) المدى (اختياري)

Specifies the extent that will be used to select or clip features.

· Default—The extent will be based on the maximum extent of all participating layers. This is the default.

· Union of Inputs—The maximum extent of all inputs.

· Intersection of Inputs—The minimum area common to all inputs.

· As Specified Below—Specify the minimum and maximum extent values.

· Same as Display—Extent is equal to the data frame or visible display.

يحدد المدى الذي سيتم استخدامه لتحديد الميزات أو قصها.

• افتراضي - سيعتمد المدى على أقصى مدى لجميع الطبقات المشاركة. هذا هو الافتراضي.

• اتحاد المدخلات - أقصى مدى لجميع المدخلات.

• تقاطع المدخلات - المنطقة الدنيا المشتركة لجميع المدخلات.

• كما هو محدد أدناه - حدد قيم الحد الأدنى والأقصى.

• نفس العرض - المدى يساوي إطار البيانات أو العرض المرئي.

Apply Extent only to enterprise geodatabase layers (optional)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

·      Unchecked—Extent will be applied to all layers. This is the default.

·      Checked—Extent will be applied to enterprise geodatabase layers only.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

6.    Apply Extent only to enterprise geodatabase layers (optional) تطبيق النطاق فقط على طبقات قاعدة البيانات الجغرافية الخاصة بالمؤسسة (اختياري)

Determines whether specified extent will be applied to all layers or only to enterprise geodatabase layers.

· Unchecked—Extent will be applied to all layers. This is the default.

· Checked—Extent will be applied to enterprise geodatabase layers only.

يحدد ما إذا كان النطاق المحدد سيتم تطبيقه على كل الطبقات أم فقط على طبقات قاعدة البيانات الجغرافية الخاصة بالمؤسسة.

• غير محدد - سيتم تطبيق النطاق على جميع الطبقات. هذا هو الافتراضي.

• تم التحديد - سيتم تطبيق النطاق على طبقات قاعدة البيانات الجغرافية للمؤسسة فقط.

Schema only (optional)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

·      Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

·      Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

7.    Schema only (optional) المخطط فقط (اختياري)

Specifies whether only the schema of input and output datasets will be consolidated or packaged.

· Unchecked—All features and records for input and output datasets will be included in the consolidated folder or package. This is the default.

· Checked—Only the schema of the input and output datasets will be consolidated or packaged. No features or records will be consolidated or packaged in the output folder.

يحدد ما إذا كان سيتم دمج أو حزم مخطط مجموعات بيانات الإدخال والإخراج فقط.

• غير محدد - سيتم تضمين جميع الميزات والسجلات الخاصة بمجموعات بيانات الإدخال والإخراج في المجلد أو الحزمة المدمجة. هذا هو الافتراضي.

• تم التحديد - سيتم فقط دمج مخطط مجموعات بيانات الإدخال والإخراج أو تجميعها. لن يتم دمج أي ميزات أو سجلات أو تجميعها في مجلد الإخراج.

 اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:

مجموعة على الفيس بوك ArcGIS Pro من هنا.

مجموعة على الفيس بوك GIS for WE - ArcGIS Pro من هنا.

صفحة الفيس بوك GIS for WE من هنا.