بناء الحدود و الآثار Build Boundary and Footprints Tools

القائمة الرئيسية

الصفحات

بناء الحدود و الآثار Build Boundary and Footprints Tools

لمتابعة موقعنا ليصلك كل جديد إضغط هنا


Build Boundary and Footprints Tools

Build Boundary

أداة بناء الحدود

ArcMap ArcGIS

How to Build Boundary Tool in Arc Toolbox ArcMap ArcGIS??

كيفية استخدام أداة بناء الحدودArc Toolbox ArcMap ArcGIS   ؟؟


كيفية استخدام أداة بناء الحدودArc Toolbox ArcMap ArcGIS   ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Build Boundary Tool, Mosaic Dataset Toolset, Raster Box, Data Management Tools Toolbox

Build Boundary Tool

 

Build Boundary

Updates the extent of the boundary when adding new raster datasets to a mosaic dataset that extend beyond its previous coverage.

يحدّث مدى الحد عند إضافة مجموعات بيانات نقطية جديدة إلى مجموعة بيانات دمج الصور تتجاوز تغطيتها السابقة.

1.    Mosaic Dataset مجموعة بيانات دمج الصور

Select the mosaic dataset where you want to recompute the boundary.

حدد مجموعة بيانات دمج الصور حيث تريد إعادة حساب الحدود.

Query Definition (optional)

An SQL query to compute a boundary for select raster datasets. Use this option in conjunction with the Append to Existing Boundary option to save time when adding new raster datasets.

Append To Existing Boundary (optional)

Use this option when adding new raster datasets to an existing mosaic dataset. Instead of calculating the entire boundary, it will merge the boundary of the new raster datasets with the existing boundary.

Simplification Method (optional)

The simplification method reduces the number of vertices, since a dense boundary can affect performance.

Choose which simplification method to use to simplify the boundary.

2.    Query Definition (optional) تعريف الاستعلام (اختياري)

An SQL query to compute a boundary for select raster datasets. Use this option in conjunction with the Append to Existing Boundary option to save time when adding new raster datasets.

استعلام SQL لحساب حد لمجموعات بيانات نقطية محددة. استخدم هذا الخيار جنبًا إلى جنب مع خيار Append to Existing Boundary لتوفير الوقت عند إضافة مجموعات بيانات نقطية جديدة.

Append To Existing Boundary (optional)

Use this option when adding new raster datasets to an existing mosaic dataset. Instead of calculating the entire boundary, it will merge the boundary of the new raster datasets with the existing boundary.

Simplification Method (optional)

The simplification method reduces the number of vertices, since a dense boundary can affect performance.

Choose which simplification method to use to simplify the boundary.

3.    Append to Existing Boundary (optional) إلحاق بالحدود الحالية (اختياري)

Use this option when adding new raster datasets to an existing mosaic dataset. Instead of calculating the entire boundary, it will merge the boundary of the new raster datasets with the existing boundary.

· Checked—Append the perimeter of footprints to the existing boundary. This can save time when adding additional raster data to the mosaic dataset, as the entire boundary will not be recalculated. If there are rasters selected, the boundary will be recalculated to include only the selected footprints. This is the default.

· Unchecked—Recompute the boundary in its entirety.

استخدم هذا الخيار عند إضافة مجموعات بيانات نقطية جديدة إلى مجموعة بيانات دمج الصور موجودة. بدلاً من حساب الحد بالكامل ، سيتم دمج حدود مجموعات البيانات النقطية الجديدة مع الحد الحالي.

• تم التحديد - قم بإلحاق محيط آثار الأقدام بالحد الحالي. يمكن أن يوفر هذا الوقت عند إضافة بيانات نقطية إضافية إلى مجموعة بيانات دمج الصور ، حيث لن يتم إعادة حساب الحد بالكامل. إذا كانت هناك بيانات نقطية محددة ، فسيتم إعادة حساب الحدود لتضمين آثار الأقدام المحددة فقط. هذا هو الافتراضي.

• غير محدد - إعادة حساب الحدود بالكامل.

Simplification Method (optional)

The simplification method reduces the number of vertices, since a dense boundary can affect performance.

Choose which simplification method to use to simplify the boundary.

4.    Simplification Method (optional) طريقة التبسيط (اختياري)

The simplification method reduces the number of vertices, since a dense boundary can affect performance.

Choose which simplification method to use to simplify the boundary.

· NONE—No simplification method will be implemented. This is the default.

· CONVEX_HULL—The minimum bounding geometry of the mosaic dataset will be used to simplify the boundary. If there are any footprints that are disconnected, a minimum bounding geometry for each continuous group of footprints will be used to simplify the boundary.

· ENVELOPE—The envelope of the mosaic dataset will provide a simplified boundary. If there are any footprints that are disconnected, an envelope for each continuous group of footprints will be used to simplify the boundary.

تقلل طريقة التبسيط من عدد الرؤوس ، لأن الحد الكثيف يمكن أن يؤثر على الأداء.

اختر طريقة التبسيط التي ستستخدمها لتبسيط الحدود.

• لا شيء - لن يتم تنفيذ أي طريقة تبسيط. هذا هو الافتراضي.

CONVEX_HULL - سيتم استخدام الحد الأدنى من هندسة الإحاطة لمجموعة بيانات دمج الصور لتبسيط الحدود. إذا كان هناك أي آثار أقدام غير متصلة ، فسيتم استخدام الحد الأدنى من هندسة الإحاطة لكل مجموعة مستمرة من آثار الأقدام لتبسيط الحدود.

ENVELOPE - سيوفر مغلف مجموعة البيانات دمج الصور حدًا مبسطًا. إذا كان هناك أي آثار أقدام غير متصلة ، فسيتم استخدام مظروف لكل مجموعة مستمرة من آثار الأقدام لتبسيط الحدود.

Build Footprints

أداة بناء الآثار

ArcMap ArcGIS

How to Build Footprints Tool in Arc Toolbox ArcMap ArcGIS??

كيفية استخدام أداة بناء آثار الأقدامArc Toolbox ArcMap ArcGIS   ؟؟


كيفية استخدام أداة بناء آثار الأقدامArc Toolbox ArcMap ArcGIS   ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Build Footprints Tool, Mosaic Dataset Toolset, Raster Box, Data Management Tools Toolbox

 Build Footprints Tool

Build Footprints

Computes the extent of every raster in a mosaic dataset. This tool is used when you have added or removed raster datasets from a mosaic dataset and want to recompute the footprints.

لحساب مدى كل خطوط نقطية في مجموعة بيانات دمج الصور. تُستخدم هذه الأداة عند إضافة مجموعات البيانات النقطية أو إزالتها من مجموعة بيانات دمج الصور وترغب في إعادة حساب آثار الأقدام.

1.    Mosaic Dataset مجموعة بيانات دمج الصور

The mosaic dataset that contains the raster datasets whose footprints you want to compute.

مجموعة بيانات دمج الصور التي تحتوي على مجموعات البيانات النقطية التي تريد حساب آثار أقدامها.

Query Definition (optional)

An SQL expression to select specific raster datasets within the mosaic dataset.

Computation Method (optional)

Refine the footprints using one of the following methods:

Minimum Data Value (optional)

Exclude pixels with a value less than this number.

Maximum Data Value (optional)

Exclude pixels with a value greater than this number.

Approximate number of vertices (optional)

Choose between 4 and 10,000. More vertices will improve accuracy but can extend processing time. A value of -1 will calculate all vertices. More vertices will increase accuracy but also the processing time.

Shrink distance (optional)

Clip the footprint by this distance. This can eliminate artifacts from using lossy compression, which causes the edges of the image to overlap into NoData areas.

Shrinking of the polygon is used to counteract effects of lossy compression, which causes edges of the image to overlap into NoData areas.

Maintain sheet edges (optional)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

2.    Query Definition (optional) تعريف الاستعلام (اختياري)

An SQL expression to select specific raster datasets within the mosaic dataset.

تعبير SQL لتحديد مجموعات بيانات نقطية معينة ضمن مجموعة بيانات دمج الصور.

3.    Computation Method (optional) طريقة الحساب (اختياري)

Refine the footprints using one of the following methods:

· RADIOMETRY— Exclude pixels with a value outside of a defined range. This option is generally used to exclude border areas, which do not contain valid data. This is the default.

· GEOMETRY— Restore the footprint to its original geometry.

· COPY_TO_SIBLING— Replace the panchromatic footprint with the multispectral footprint when using a pan-sharpened raster type. This can occur when the panchromatic and multispectral images do not have identical geometries.

· NONE—Do not redefine the footprints.

صقل البصمات باستخدام إحدى الطرق التالية:

RADIOMETRY - استبعاد وحدات البكسل بقيمة خارج النطاق المحدد. يستخدم هذا الخيار بشكل عام لاستبعاد المناطق الحدودية التي لا تحتوي على بيانات صالحة. هذا هو الافتراضي.

• الهندسة - استعادة البصمة إلى هندستها الأصلية.

COPY_TO_SIBLING - استبدل البصمة الشاملة بألوان متعددة الأطياف عند استخدام نوع نقطي شحذ عمومًا. يمكن أن يحدث هذا عندما لا تحتوي الصور البانكروماتية ومتعددة الأطياف على أشكال هندسية متطابقة.

• لا شيء - لا تقم بإعادة تعريف آثار الأقدام.

4.    Minimum Data Value (optional) الحد الأدنى لقيمة البيانات (اختياري)

Exclude pixels with a value less than this number.

استبعد وحدات البكسل بقيمة أقل من هذا الرقم.

5.    Maximum Data Value (optional) الحد الأقصى لقيمة البيانات (اختياري)

Exclude pixels with a value greater than this number.

استبعاد وحدات البكسل بقيمة أكبر من هذا الرقم.

6.    Approximate number of vertices (optional) العدد التقريبي للرؤوس (اختياري)

Choose between 4 and 10,000. More vertices will improve accuracy but can extend processing time. A value of -1 will calculate all vertices. More vertices will increase accuracy but also the processing time.

اختر ما بين 4 و 10000. سيؤدي المزيد من الرؤوس إلى تحسين الدقة ولكن يمكن أن يطيل وقت المعالجة. ستقوم القيمة -1 بحساب جميع الرؤوس. سيؤدي المزيد من الرؤوس إلى زيادة الدقة وكذلك وقت المعالجة.

7.    Shrink distance (optional) تقليص المسافة (اختياري)

Clip the footprint by this distance. This can eliminate artifacts from using lossy compression, which causes the edges of the image to overlap into NoData areas.

Shrinking of the polygon is used to counteract effects of lossy compression, which causes edges of the image to overlap into NoData areas.

قص البصمة بهذه المسافة. يمكن أن يؤدي ذلك إلى إزالة العناصر الأثرية من استخدام الضغط مع فقدان البيانات ، مما يتسبب في تداخل حواف الصورة في مناطق NoData.

يتم استخدام تقليص المضلع لمقاومة تأثيرات الضغط المفقود ، والذي يتسبب في تداخل حواف الصورة في مناطق NoData.

8.    Maintain sheet edges (optional) الحفاظ على حواف الورقة (اختياري)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

· Unchecked—Remove the sheet edges from all the footprints. This is the default.

· Checked—Maintain the footprints in their original state.

قم بتغيير آثار أقدام مجموعات البيانات النقطية التي تم تجانبها والمجاورة (اصطف على طول اللحامات مع القليل من التداخل أو عدم التداخل).

• غير محدد — قم بإزالة حواف الورقة من كافة آثار الأقدام. هذا هو الافتراضي.

• تم الفحص - حافظ على آثار الأقدام في حالتها الأصلية.

9.    Skip overviews (optional) تخطي النظرات العامة (اختياري)

Adjust the footprints of overviews.

· Checked—Do not adjust the footprints of overviews. This is the default.

· Unchecked—Adjust the footprints of overviews and associated raster datasets.

اضبط آثار أقدام النظرات العامة.

• تم التحديد - لا تقم بضبط آثار أقدام النظرات العامة. هذا هو الافتراضي.

• غير محدد - لضبط آثار أقدام النظرات العامة ومجموعات البيانات النقطية المرتبطة بها.

10. Update Boundary (optional) حد التحديث (اختياري)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

· Checked—Update the boundary. This is the default.

· Unchecked—Do not update the boundary.

قم بتحديث حدود مجموعة بيانات دمج الصور إذا أضفت أو أزلت صورًا تغير المدى.

• تم التحديد - تحديث الحدود. هذا هو الافتراضي.

• غير محدد - لا تقم بتحديث الحدود.

11. Simplification Method (optional) طريقة التبسيط (اختياري)

Reduce the number of vertices in the footprint to improve performance.

· NONE—Do not limit the number of vertices. This is the default.

· CONVEX_HULL—Use the minimum bounding box to simplify the footprint.

· ENVELOPE—Use the envelope of each mosaic dataset item to simplify the footprint.

قلل عدد الرؤوس في البصمة لتحسين الأداء.

• لا شيء - لا تحد من عدد الرؤوس. هذا هو الافتراضي.

CONVEX_HULL - استخدم مربع الحد الأدنى لتبسيط البصمة.

ENVELOPE - استخدم مغلف كل عنصر من عناصر مجموعة البيانات دمج الصور لتبسيط البصمة.

12. Edge tolerance (optional) تفاوت الحواف (اختياري)

·         Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

·         By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

·         A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

• ادفع البصمة إلى حافة الورقة إذا كانت ضمن هذا التفاوت. الوحدات هي نفسها الموجودة في نظام إحداثيات مجموعة البيانات دمج الصور.

• بشكل افتراضي ، تكون القيمة فارغة والتي يتم حساب التفاوت من أجلها بناءً على حجم البكسل المقابل للخطوط النقطية المعاد تشكيلها المطلوبة.

• ستحسب القيمة -1 التسامح باستخدام متوسط حجم البكسل لمجموعة بيانات دمج الصور.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Maintain sheet edges (optional)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Shrink distance (optional)

Clip the footprint by this distance. This can eliminate artifacts from using lossy compression, which causes the edges of the image to overlap into NoData areas.

Shrinking of the polygon is used to counteract effects of lossy compression, which causes edges of the image to overlap into NoData areas.

Maintain sheet edges (optional)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Approximate number of vertices (optional)

Choose between 4 and 10,000. More vertices will improve accuracy but can extend processing time. A value of -1 will calculate all vertices. More vertices will increase accuracy but also the processing time.

Shrink distance (optional)

Clip the footprint by this distance. This can eliminate artifacts from using lossy compression, which causes the edges of the image to overlap into NoData areas.

Shrinking of the polygon is used to counteract effects of lossy compression, which causes edges of the image to overlap into NoData areas.

Maintain sheet edges (optional)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Maximum Data Value (optional)

Exclude pixels with a value greater than this number.

Approximate number of vertices (optional)

Choose between 4 and 10,000. More vertices will improve accuracy but can extend processing time. A value of -1 will calculate all vertices. More vertices will increase accuracy but also the processing time.

Shrink distance (optional)

Clip the footprint by this distance. This can eliminate artifacts from using lossy compression, which causes the edges of the image to overlap into NoData areas.

Shrinking of the polygon is used to counteract effects of lossy compression, which causes edges of the image to overlap into NoData areas.

Maintain sheet edges (optional)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

Computation Method (optional)

Refine the footprints using one of the following methods:

Minimum Data Value (optional)

Exclude pixels with a value less than this number.

Maximum Data Value (optional)

Exclude pixels with a value greater than this number.

Approximate number of vertices (optional)

Choose between 4 and 10,000. More vertices will improve accuracy but can extend processing time. A value of -1 will calculate all vertices. More vertices will increase accuracy but also the processing time.

Shrink distance (optional)

Clip the footprint by this distance. This can eliminate artifacts from using lossy compression, which causes the edges of the image to overlap into NoData areas.

Shrinking of the polygon is used to counteract effects of lossy compression, which causes edges of the image to overlap into NoData areas.

Maintain sheet edges (optional)

Alter the footprints of raster datasets that have been tiled and are adjacent (line up along the seams with little to no overlap).

Skip overviews (optional)

Adjust the footprints of overviews.

Update Boundary (optional)

Update the boundary of the mosaic dataset if you have added or removed imagery that changes the extent.

Simplification Method (optional)

Reduce the number of vertices in the footprint to improve performance.

Edge tolerance (optional)

Snap the footprint to the sheet edge if it is within this tolerance. Units are the same as those in the mosaic dataset coordinate system.

By default, the value is empty for which the tolerance is computed based on the pixel size corresponding to the requested resampled raster.

A value of -1 will compute the tolerance using the average pixel size of the mosaic dataset.

Request Size (optional)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

 

13. Request Size (optional) حجم الطلب (اختياري)

Set the resampled extent (in columns and rows) for the raster when building footprints. Greater image resolution provides more detail in the raster dataset but increases the processing time. A value of -1 will compute the footprint at the original resolution.

عيّن المدى المعاد تشكيله (في الأعمدة والصفوف) للنقطية عند إنشاء آثار أقدام. توفر دقة الصورة الأكبر مزيدًا من التفاصيل في مجموعة البيانات النقطية ولكنها تزيد من وقت المعالجة. ستقوم القيمة -1 بحساب البصمة بدقة الوضوح الأصلية.

Minimum Region Size (optional)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

14. Minimum Region Size (optional) الحد الأدنى لحجم المنطقة (اختياري)

Avoid small holes in your imagery when using pixel values to create a mask. For example, your imagery may have a range of values from 0 to 255, and to mask clouds, you've excluded values from 245 to 255, which may cause other, noncloud pixels to be masked as well. If those areas are smaller than the number of pixels specified here, they will not be masked out.

تجنب الثقوب الصغيرة في صورك عند استخدام قيم البكسل لإنشاء قناع. على سبيل المثال ، قد تحتوي صورك على نطاق من القيم من 0 إلى 255 ، ولإخفاء الغيوم ، فقد استبعدت القيم من 245 إلى 255 ، مما قد يتسبب في إخفاء وحدات البكسل الأخرى غير السحابية أيضًا. إذا كانت هذه المناطق أصغر من عدد البكسل المحدد هنا ، فلن يتم إخفاءها.

Minimum Thinness Ratio (optional)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

15. Minimum Thinness Ratio (optional) الحد الأدنى من نسبة النحافة (اختياري)

Define the thinness of slivers on a scale from 0 to 1.0, where 1.0 represents a circle and 0.0 represents a polygon that approaches a straight line.

Polygons that are below both the Maximum Sliver Size and Minimum Thinness Ratio will be removed from the footprint.

حدد سُمك الشظايا على مقياس من 0 إلى 1.0 ، حيث يمثل 1.0 دائرة ويمثل 0.0 مضلعًا يقترب من خط مستقيم.

ستتم إزالة المضلعات التي تكون أقل من الحد الأقصى لحجم الشظية والحد الأدنى لنسبة النحافة من البصمة.

Maximum Sliver Size (optional)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

16. Maximum Sliver Size (optional) الحد الأقصى لحجم الشظية (اختياري)

Identify all polygons that are smaller than the square of this value. The value is specified in pixels and is based on the Request Size, not the spatial resolution of the source raster.

Regions less than the (Maximum Sliver Size)^2 and less than the Minimum Thinness Ratio are considered slivers and will be removed.

حدد كل المضلعات الأصغر من مربع هذه القيمة. يتم تحديد القيمة بالبكسل وتعتمد على حجم الطلب ، وليس الدقة المكانية للمصدر النقطي.

المناطق الأقل من (الحد الأقصى لحجم الشظية) ^ 2 وأقل من الحد الأدنى لنسبة النحافة تعتبر شظية وستتم إزالتها.


 اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:


مجموعة على الفيس بوك ArcGIS Pro من هنا.
مجموعة على الفيس بوك GIS for WE - ArcGIS Pro من هنا.
صفحة الفيس بوك GIS for WE من هنا.

 

GIS for WE

تعليقات

التنقل السريع
    >