حساب المواقع Calculate Locations

القائمة الرئيسية

الصفحات

حساب المواقع Calculate Locations

لمتابعة موقعنا ليصلك كل جديد إضغط هنا


Calculate Locations Tool

أداة حساب المواقع

ArcMap ArcGIS

How to use Calculate Locations Tool in Arc Toolbox ArcMap ArcGIS??

كيفية استخدام أداة حساب المواقع  ؟؟

كيفية استخدام أداة حساب المواقع  ؟؟

Path to access the toolمسار الوصول الى الأداة

:

Calculate Locations Tool, Analysis Toolset, Network Analyst Tools Toolbox

Calculate Locations Tool

 

Calculate Locations

Adds fields to the input features that contain the network location of the features. The tool is used to store the network location information as feature attributes to quickly load the features as inputs for a network analysis layer.

يضيف الحقول إلى ميزات الإدخال التي تحتوي على موقع الشبكة للميزات. تُستخدم الأداة لتخزين معلومات موقع الشبكة كسمات معلم لتحميل الميزات بسرعة كمدخلات لطبقة تحليل الشبكة.

1.    Input Features أدخل المعالم

The input features for which the network locations will be calculated.

For line and polygon features, since the network location information is stored in a blob field (specified in the Location ranges field parameter), only geodatabase feature classes are supported.

ميزات الإدخال التي سيتم حساب مواقع الشبكة من أجلها.

بالنسبة لميزات الخط والمضلع ، نظرًا لأنه يتم تخزين معلومات موقع الشبكة في حقل blob (محدد في معلمة حقل نطاقات المواقع) ، يتم دعم فئات معالم قاعدة البيانات الجغرافية فقط.

Input Analysis Network

The network dataset used to calculate the locations.

If a sublayer of a network analysis layer is used as input features, the parameter is automatically set to the network dataset referenced by the network analysis layer.

Search Tolerance

The search tolerance for locating the input features on the network. Features that are outside the search tolerance are left unlocated. The parameter includes a value and units for the tolerance.

Search Criteria

Specifies which sources in the network dataset will be searched when finding locations and what portions of geometry (also known as snap types) will be used.

For geodatabase network datasets, the snap types can be specified for each subtype of the network source (["Streets : Local Streets","SHAPE"]).

When calculating locations for line or polygon features, only the SHAPE snap type is used, even if other snap types are specified.

Find Closest among All Classes (optional)

Exclude Restricted Portions of the Network (optional)

This parameter is applicable only when the input features are from the sub layer of a network analysis layer and are not barrier objects.

Search Query (optional)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

2.    Input Analysis Network أدخل تحليل الشبكة

The network dataset used to calculate the locations.

If a sublayer of a network analysis layer is used as input features, the parameter is automatically set to the network dataset referenced by the network analysis layer.

مجموعة بيانات الشبكة المستخدمة لحساب المواقع.

إذا تم استخدام طبقة فرعية من طبقة تحليل الشبكة كميزات إدخال ، يتم تعيين المعلمة تلقائيًا على مجموعة بيانات الشبكة المشار إليها بواسطة طبقة تحليل الشبكة.

Search Tolerance

The search tolerance for locating the input features on the network. Features that are outside the search tolerance are left unlocated. The parameter includes a value and units for the tolerance.

Search Criteria

Specifies which sources in the network dataset will be searched when finding locations and what portions of geometry (also known as snap types) will be used.

For geodatabase network datasets, the snap types can be specified for each subtype of the network source (["Streets : Local Streets","SHAPE"]).

When calculating locations for line or polygon features, only the SHAPE snap type is used, even if other snap types are specified.

Find Closest among All Classes (optional)

Exclude Restricted Portions of the Network (optional)

This parameter is applicable only when the input features are from the sub layer of a network analysis layer and are not barrier objects.

Search Query (optional)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

3.    Search Tolerance بحث المسافة المسموحة

The search tolerance for locating the input features on the network. Features that are outside the search tolerance are left unlocated. The parameter includes a value and units for the tolerance.

تفاوت البحث لتحديد موقع ميزات الإدخال على الشبكة. يتم ترك الميزات التي تقع خارج نطاق تسامح البحث غير محددة. تتضمن المعلمة قيمة ووحدات للتفاوت.

Search Criteria

Specifies which sources in the network dataset will be searched when finding locations and what portions of geometry (also known as snap types) will be used.

For geodatabase network datasets, the snap types can be specified for each subtype of the network source (["Streets : Local Streets","SHAPE"]).

When calculating locations for line or polygon features, only the SHAPE snap type is used, even if other snap types are specified.

Find Closest among All Classes (optional)

Exclude Restricted Portions of the Network (optional)

This parameter is applicable only when the input features are from the sub layer of a network analysis layer and are not barrier objects.

Search Query (optional)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

4.    Search Criteria معايير البحث

Specifies which sources in the network dataset will be searched when finding locations and what portions of geometry (also known as snap types) will be used.

For geodatabase network datasets, the snap types can be specified for each subtype of the network source (["Streets : Local Streets","SHAPE"]).

When calculating locations for line or polygon features, only the SHAPE snap type is used, even if other snap types are specified.

تحدد المصادر الموجودة في مجموعة بيانات الشبكة التي سيتم البحث عنها عند البحث عن المواقع وأجزاء الهندسة (المعروفة أيضًا باسم أنواع المفاجئة) التي سيتم استخدامها.

بالنسبة لمجموعات بيانات شبكة قاعدة البيانات الجغرافية ، يمكن تحديد أنواع المفاجئة لكل نوع فرعي من مصدر الشبكة (["الشوارع: الشوارع المحلية" ، "الشكل"]).

عند حساب المواقع لميزات الخط أو المضلع ، يتم استخدام نوع SHAPE snap فقط ، حتى إذا تم تحديد أنواع snap أخرى.

Find Closest among All Classes (optional)

Exclude Restricted Portions of the Network (optional)

This parameter is applicable only when the input features are from the sub layer of a network analysis layer and are not barrier objects.

Search Query (optional)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

5.    Find Closest among All Classes (optional) البحث عن الأقرب بين جميع الفئات (اختياري)

· Checked—Matches the new network locations to the closest network source among all the sources that have a snap type specified in the search criteria. This is the default.

· Unchecked—Matches the new network locations to the first network source having a snap type specified in the search criteria. The sources are searched in the priority order, and the searching stops when the location is found within the search tolerance.

• محدد - يطابق مواقع الشبكة الجديدة مع أقرب مصدر للشبكة من بين جميع المصادر التي لها نوع سريع محدد في معايير البحث. هذا هو الافتراضي.

• غير محدد - يطابق مواقع الشبكة الجديدة بمصدر الشبكة الأول ذي النوع الخاطف المحدد في معايير البحث. يتم البحث عن المصادر بترتيب الأولوية ، ويتوقف البحث عند العثور على الموقع ضمن نطاق تفاوت البحث.

Exclude Restricted Portions of the Network (optional)

This parameter is applicable only when the input features are from the sub layer of a network analysis layer and are not barrier objects.

Search Query (optional)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

6.    Exclude Restricted Portions of the Network (optional) استبعاد الأجزاء المقيدة من الشبكة (اختياري)

This parameter is applicable only when the input features are from the sub layer of a network analysis layer and are not barrier objects.

· Checked The network locations are only placed on traversable portions of the network. This prevents placing network locations on elements that you can't reach due to restrictions or barriers. Before relocating your network locations using this option, make sure that you have already added all the restriction barriers to the network analysis layer to get expected results.

· Unchecked The network locations are placed on all the elements of the network. The network locations that are relocated with this option may be unreachable during the solve process if they are placed on restricted elements.

هذه المعلمة قابلة للتطبيق فقط عندما تكون ميزات الإدخال من الطبقة الفرعية لطبقة تحليل الشبكة وليست كائنات حاجزة.

• تم التحديد يتم وضع مواقع الشبكة فقط على الأجزاء التي يمكن عبورها من الشبكة. هذا يمنع وضع مواقع الشبكة على العناصر التي لا يمكنك الوصول إليها بسبب القيود أو العوائق. قبل نقل مواقع شبكتك باستخدام هذا الخيار ، تأكد من أنك قد أضفت بالفعل جميع حواجز التقييد إلى طبقة تحليل الشبكة للحصول على النتائج المتوقعة.

• غير محدد يتم وضع مواقع الشبكة على جميع عناصر الشبكة. قد يتعذر الوصول إلى مواقع الشبكة التي تم نقلها باستخدام هذا الخيار أثناء عملية الحل إذا تم وضعها على عناصر مقيدة.

Search Query (optional)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

7.    Search Query (optional) استعلام البحث (اختياري)

Specifies a query to restrict the search to a subset of the features within a source feature class. This is useful if you don't want to find features that may be unsuited for a network location. For example, if you are loading centroids of polygons and don't want to locate on local roads, you can define a query that searches for major roads only.

An SQL expression for a given source is specified by selecting the source name in the Name column and clicking the SQL button. If you don't want to specify a query for a source, remove the SQL expression for that source by selecting the source name and clicking the Remove button.

By default, no query is used.

يحدد استعلامًا لقصر البحث على مجموعة فرعية من المعالم ضمن فئة المعالم المصدر. يكون هذا مفيدًا إذا كنت لا تريد العثور على ميزات قد تكون غير مناسبة لموقع الشبكة. على سبيل المثال ، إذا كنت تقوم بتحميل النقطتين الوسطى من المضلعات ولا تريد تحديد موقع على الطرق المحلية ، فيمكنك تحديد طلب بحث يبحث عن الطرق الرئيسية فقط.

يتم تحديد تعبير SQL لمصدر معين عن طريق تحديد اسم المصدر في عمود الاسم والنقر فوق الزر SQL. إذا كنت لا تريد تحديد استعلام لمصدر ما ، فقم بإزالة تعبير SQL لهذا المصدر عن طريق تحديد اسم المصدر والنقر فوق الزر "إزالة".

بشكل افتراضي ، لا يتم استخدام أي استعلام.

Source ID Field (optional)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

8.    Source ID Field (optional) حقل معرف المصدر (اختياري)

The name of the field to be created or updated with the source ID of the computed network location. A field named SourceID is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه بمعرف المصدر لموقع الشبكة المحسوب. يتم إنشاء حقل يسمى SourceID أو تحديثه بشكل افتراضي.

Source OID Field (optional)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

9.    Source OID Field (optional) مصدر معرف الحقل (اختياري)

The name of the field to be created or updated with the source OID of the computed network location. A field named SourceOID is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه باستخدام معرف الكائن المصدر لموقع الشبكة المحسوب. يتم إنشاء حقل يسمى SourceOID أو تحديثه افتراضيًا.

Percent Along Field (optional)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

10. Percent Along Field (optional) النسبة المئوية على طول الحقل (اختياري)

The name of the field to be created or updated with the percent along with the computed network location. A field named PosAlong is created or updated by default.

اسم الحقل المراد إنشاؤه أو تحديثه بالنسبة المئوية جنبًا إلى جنب مع موقع الشبكة المحسوب. يتم إنشاء حقل يسمى PosAlong أو تحديثه افتراضيًا.

Side of Edge Field (optional)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

11. Side of Edge Field (optional) جانب حقل الحافة (اختياري)

The name of the field to be created or updated with the side of edge on which the point feature is located on the computed network location. A field named SideOfEdge is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه بجانب الحافة التي توجد عليها ميزة النقطة في موقع الشبكة المحسوب. يتم إنشاء حقل يسمى SideOfEdge أو تحديثه افتراضيًا.

Located X-Coordinate Field (optional)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

12. Located X-Coordinate Field (optional) موقع حقل الاحداثيات س (اختياري)

The name of the field to be created or updated with the x-coordinate of the computed network location. A field named SnapX is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه باستخدام الإحداثي x الخاص بموقع الشبكة المحسوب. يتم إنشاء حقل يسمى SnapX أو تحديثه افتراضيًا.

Located Y-Coordinate Field (optional)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

Distance from Feature Field (optional)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

13. Located Y-Coordinate Field (optional) موقع حقل الاحداثيات ص (اختياري)

The name of the field to be created or updated with the y-coordinate of the computed network location. A field named SnapY is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه باستخدام الإحداثي y الخاص بموقع الشبكة المحسوب. يتم إنشاء حقل يسمى SnapY أو تحديثه افتراضيًا.

14. Distance from Feature Field (optional) المسافة من حقل المعالم (اختياري)

The name of the field to be created or updated with the distance of the point feature from the computed network location. A field named Distance is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه بمسافة معلم النقطة من موقع الشبكة المحسوب. يتم إنشاء حقل يسمى المسافة أو تحديثه بشكل افتراضي.

Located Z-Coordinate Field (optional)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

15. Located Z-Coordinate Field (optional) موقع حقل احداثيات الإرتفاع (اختياري)

The name of the field to be created or updated with the z-coordinate of the computed network location. A field named SnapZ is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه باستخدام الإحداثي z لموقع الشبكة المحسوب. يتم إنشاء حقل يسمى SnapZ أو تحديثه افتراضيًا.

Location Ranges Field (optional)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

16. Location Ranges Field (optional) حقل نطاقات المواقع (اختياري)

The name of the field to be created or updated with the location ranges of the computed network locations for the line or polygon features. A field named Locations is created or updated by default.

اسم الحقل الذي سيتم إنشاؤه أو تحديثه بنطاقات المواقع الخاصة بمواقع الشبكة المحسوبة لميزات الخط أو المضلع. يتم إنشاء حقل يسمى المواقع أو تحديثه بشكل افتراضي.


 اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:


مجموعة على الفيس بوك ArcGIS Pro من هنا.
مجموعة على الفيس بوك GIS for WE - ArcGIS Pro من هنا.
صفحة الفيس بوك GIS for WE من هنا.

 

GIS for WE

تعليقات

التنقل السريع
    >