Copy and Create Raster Catalog Items Tools
Copy Raster Catalog Items
أداة نسخ عناصر
كالتالوج النقطية
ArcMap ArcGIS
How to Copy Raster Catalog
Items Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة نسخ عناصر كالتالوج النقطية ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Copy
Raster Catalog Items Tool, Raster Catalog Toolset, Raster Box, Data Management
Tools Toolbox
Copy Raster Catalog Items
Makes a copy of a raster
catalog, including all of its contents, or a subset of its contents if there is
a selection.
يقوم بعمل نسخة من كتالوج البيانات النقطية ، بما
في ذلك كل محتوياته ، أو مجموعة فرعية من محتوياته إذا كان هناك تحديد.
1.
Input Raster Catalog أدخل كالتالوج
النقطية
The name and location of
the raster catalog to be copied.
اسم وموقع كتالوج البيانات النقطية المراد نسخه.
2.
Output Raster Catalog كالتالوج
النقطية المخرج
The name and location of
the output raster catalog.
You can copy your output
raster catalog to any type of geodatabase.
اسم وموقع كتالوج البيانات النقطية الناتج.
يمكنك نسخ كتالوج البيانات النقطية الناتج إلى أي
نوع من قواعد البيانات الجغرافية.
Configuration
Keyword (optional)
Specifies the storage parameters (configuration) for a geodatabase.
Configuration keywords are set up by your database administrator.
Output Spatial
Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters apply only to file
geodatabases and enterprise geodatabases. If you are unfamiliar with setting
grid sizes, leave these options as 0,0,0 and ArcGIS will compute optimal sizes
for you. For more information about this parameter, refer to the Add Spatial
Index tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
3.
Configuration Keyword (optional) كلمة
التكوين الرئيسية (اختياري)
Specifies the storage parameters
(configuration) for a geodatabase. Configuration keywords are set up by your
database administrator.
يحدد معلمات التخزين (التكوين) لقاعدة بيانات
جغرافية. تم إعداد الكلمات الأساسية للتكوين من قبل مسؤول قاعدة البيانات.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters apply only to file
geodatabases and enterprise geodatabases. If you are unfamiliar with setting
grid sizes, leave these options as 0,0,0 and ArcGIS will compute optimal sizes
for you. For more information about this parameter, refer to the Add Spatial
Index tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
4.
Output Spatial Grid 1 (optional) شبكة
الإخراج المكانية 1 (اختياري)
The Output Spatial Grid
1, 2, and 3 parameters apply only to file geodatabases and enterprise
geodatabases. If you are unfamiliar with setting grid sizes, leave these
options as 0,0,0 and ArcGIS will compute optimal sizes for you. For more
information about this parameter, refer to the Add Spatial Index tool
documentation.
تنطبق معلمات Output Spatial Grid 1 و 2 و 3 فقط على قواعد البيانات الجغرافية للملف وقواعد البيانات
الجغرافية الخاصة بالمؤسسة. إذا لم تكن على دراية بإعداد أحجام الشبكة ، فاترك هذه
الخيارات على أنها 0،0،0 وسيقوم ArcGIS بحساب
الأحجام المثلى لك. لمزيد من المعلومات حول هذه المعلمة ، راجع وثائق أداة إضافة
فهرس مكاني.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
5.
Output Spatial Grid 2 (optional) شبكة
الإخراج المكانية 2 (اختياري)
Cell size of the second
spatial grid. Leave the size at 0 if you only want one grid. Otherwise, set the
size to at least three times larger than Spatial Grid 1.
حجم خلية الشبكة المكانية الثانية. اترك الحجم على
0 إذا كنت تريد شبكة واحدة فقط. خلاف ذلك ، اضبط الحجم على ثلاث مرات على الأقل
أكبر من Spatial Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
6.
Output Spatial Grid 3 (optional) شبكة
الإخراج المكانية 3 (اختياري)
Cell size of the third
spatial grid. Leave the size at 0 if you only want two grids. Otherwise, set
the size to at least three times larger than Spatial Grid 2.
حجم خلية الشبكة المكانية الثالثة. اترك الحجم على
0 إذا كنت تريد شبكتين فقط. خلاف ذلك ، اضبط الحجم على ثلاث مرات على الأقل أكبر
من Spatial Grid 2.
Create Raster Catalog
أداة إنشاء
كالتالوج النقطية
ArcMap ArcGIS
How to Create Raster
Catalog Tool in Arc Toolbox ArcMap ArcGIS??
كيفية استخدام أداة إنشاء كالتالوج النقطية ؟؟
Path
to access the toolمسار الوصول الى الأداة
:
Create
Raster Catalog Tool, Raster Catalog Toolset,
Raster Box, Data Management Tools Toolbox
Create Raster Catalog
Creates an empty raster
catalog in a geodatabase.
ينشئ كتالوج البيانات النقطية فارغًا في قاعدة
بيانات جغرافية.
1.
Output Location موقع الإخراج
The geodatabase to
contain the raster catalog; this can be any type of geodatabase.
قاعدة البيانات الجغرافية التي تحتوي على كتالوج
البيانات النقطية ؛ يمكن أن يكون هذا أي نوع من قواعد البيانات الجغرافية.
Template
Raster Catalog (optional)
If you want to base your new raster catalog on a template, you can specify
a template raster catalog. The new raster catalog will then have the same
fields as the template raster catalog.
Raster
Catalog Name
The name of the raster catalog to be created.
Coordinate
System for Raster Column (optional)
The coordinate system for the raster column in the raster catalog.
The spatial reference of the raster column is used during data loading as
one of the following:
· A default spatial reference for those raster datasets that have an unknown
spatial reference
· A target spatial reference if you choose to project your raster datasets
that have different spatial references from the raster column
The default value is the coordinate system set in the geoprocessing
Environments.
Coordinate
System for Geometry Column (optional)
The coordinate system for the geometry column.
The spatial reference for the geometry column defines the spatial
reference of the footprints of the raster datasets.
The default value is the coordinate system set in the geoprocessing
Environments.
Configuration
Keyword (optional)
Specifies the storage parameters (configuration) for a geodatabase.
Configuration keywords are set up by your database administrator.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters are used to compute a
spatial index and only apply to file geodatabases and enterprise geodatabases.
If you are unfamiliar with setting grid sizes, leave these options as 0,0,0 and
ArcGIS will compute optimal sizes for you.
If you use the default spatial grid index (of zero), it is recommended
that you load data using the Workspace To Raster Catalog tool. If that tool is
used to load raster datasets, the spatial grid size will be automatically
calculated. If another tool is used to load raster datasets into a raster
catalog, the Calculate Default Spatial Grid Index tool needs to be used after
the loading is completed.
For more information about this parameter, refer to the Add Spatial Index
tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
2.
Template Raster Catalog (optional) قالب
كاتالوج النقطية (اختياري)
If you want to base your
new raster catalog on a template, you can specify a template raster catalog.
The new raster catalog will then have the same fields as the template raster
catalog.
إذا كنت ترغب في تأسيس كتالوج البيانات النقطية
الجديد على قالب ، فيمكنك تحديد كتالوج قالب نقطي. سيكون لدى كتالوج البيانات
النقطية الجديد نفس الحقول الموجودة في كتالوج النماذج النقطية.
Raster
Catalog Name
The name of the raster catalog to be created.
Coordinate
System for Raster Column (optional)
The coordinate system for the raster column in the raster catalog.
The spatial reference of the raster column is used during data loading as
one of the following:
· A default spatial reference for those raster datasets that have an unknown
spatial reference
· A target spatial reference if you choose to project your raster datasets
that have different spatial references from the raster column
The default value is the coordinate system set in the geoprocessing
Environments.
Coordinate
System for Geometry Column (optional)
The coordinate system for the geometry column.
The spatial reference for the geometry column defines the spatial
reference of the footprints of the raster datasets.
The default value is the coordinate system set in the geoprocessing
Environments.
Configuration
Keyword (optional)
Specifies the storage parameters (configuration) for a geodatabase.
Configuration keywords are set up by your database administrator.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters are used to compute a
spatial index and only apply to file geodatabases and enterprise geodatabases.
If you are unfamiliar with setting grid sizes, leave these options as 0,0,0 and
ArcGIS will compute optimal sizes for you.
If you use the default spatial grid index (of zero), it is recommended
that you load data using the Workspace To Raster Catalog tool. If that tool is
used to load raster datasets, the spatial grid size will be automatically
calculated. If another tool is used to load raster datasets into a raster
catalog, the Calculate Default Spatial Grid Index tool needs to be used after
the loading is completed.
For more information about this parameter, refer to the Add Spatial Index
tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
3.
Raster Catalog Name اسم كالتالوج
النقطية
The name of the raster
catalog to be created.
اسم كتالوج البيانات النقطية الذي سيتم إنشاؤه.
Coordinate
System for Raster Column (optional)
The coordinate system for the raster column in the raster catalog.
The spatial reference of the raster column is used during data loading as
one of the following:
· A default spatial reference for those raster datasets that have an unknown
spatial reference
· A target spatial reference if you choose to project your raster datasets
that have different spatial references from the raster column
The default value is the coordinate system set in the geoprocessing
Environments.
Coordinate
System for Geometry Column (optional)
The coordinate system for the geometry column.
The spatial reference for the geometry column defines the spatial
reference of the footprints of the raster datasets.
The default value is the coordinate system set in the geoprocessing
Environments.
Configuration
Keyword (optional)
Specifies the storage parameters (configuration) for a geodatabase. Configuration
keywords are set up by your database administrator.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters are used to compute a
spatial index and only apply to file geodatabases and enterprise geodatabases.
If you are unfamiliar with setting grid sizes, leave these options as 0,0,0 and
ArcGIS will compute optimal sizes for you.
If you use the default spatial grid index (of zero), it is recommended
that you load data using the Workspace To Raster Catalog tool. If that tool is
used to load raster datasets, the spatial grid size will be automatically
calculated. If another tool is used to load raster datasets into a raster
catalog, the Calculate Default Spatial Grid Index tool needs to be used after
the loading is completed.
For more information about this parameter, refer to the Add Spatial Index
tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
4.
Coordinate System for Raster Column (optional) نظام الإحداثيات للعمود النقطي (اختياري)
The coordinate system
for the raster column in the raster catalog.
The spatial reference of
the raster column is used during data loading as one of the following:
·
A default spatial reference for those raster datasets that have an
unknown spatial reference
·
A target spatial reference if you choose to project your raster
datasets that have different spatial references from the raster column
The default value is the
coordinate system set in the geoprocessing Environments.
النظام الإحداثي لعمود البيانات النقطية في كتالوج
البيانات النقطية.
يتم استخدام الإسناد المكاني لعمود البيانات
النقطية أثناء تحميل البيانات كواحد مما يلي:
• مرجع مكاني افتراضي
لمجموعات البيانات النقطية التي لها مرجع مكاني غير معروف
• إسناد مكاني مستهدف إذا
اخترت عرض مجموعات البيانات النقطية التي تحتوي على مراجع مكانية مختلفة عن عمود
البيانات النقطية
القيمة الافتراضية هي نظام الإحداثيات المعين في
بيئات المعالجة الجغرافية.
Coordinate
System for Geometry Column (optional)
The coordinate system for the geometry column.
The spatial reference for the geometry column defines the spatial
reference of the footprints of the raster datasets.
The default value is the coordinate system set in the geoprocessing
Environments.
Configuration
Keyword (optional)
Specifies the storage parameters (configuration) for a geodatabase.
Configuration keywords are set up by your database administrator.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters are used to compute a
spatial index and only apply to file geodatabases and enterprise geodatabases.
If you are unfamiliar with setting grid sizes, leave these options as 0,0,0 and
ArcGIS will compute optimal sizes for you.
If you use the default spatial grid index (of zero), it is recommended
that you load data using the Workspace To Raster Catalog tool. If that tool is
used to load raster datasets, the spatial grid size will be automatically
calculated. If another tool is used to load raster datasets into a raster
catalog, the Calculate Default Spatial Grid Index tool needs to be used after
the loading is completed.
For more information about this parameter, refer to the Add Spatial Index
tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
5.
Coordinate System for Geometry Column (optional) نظام الاحداثيات للعمود الهندسي (اختياري)
The coordinate system
for the geometry column.
The spatial reference
for the geometry column defines the spatial reference of the footprints of the
raster datasets.
The default value is the
coordinate system set in the geoprocessing Environments.
نظام إحداثيات العمود الهندسي.
يحدد المرجع المكاني لعمود الهندسة الإسناد
المكاني لآثار أقدام مجموعات البيانات النقطية.
القيمة الافتراضية هي نظام الإحداثيات المعين في
بيئات المعالجة الجغرافية.
Configuration
Keyword (optional)
Specifies the storage parameters (configuration) for a geodatabase.
Configuration keywords are set up by your database administrator.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters are used to compute a spatial
index and only apply to file geodatabases and enterprise geodatabases. If you
are unfamiliar with setting grid sizes, leave these options as 0,0,0 and ArcGIS
will compute optimal sizes for you.
If you use the default spatial grid index (of zero), it is recommended
that you load data using the Workspace To Raster Catalog tool. If that tool is
used to load raster datasets, the spatial grid size will be automatically
calculated. If another tool is used to load raster datasets into a raster
catalog, the Calculate Default Spatial Grid Index tool needs to be used after
the loading is completed.
For more information about this parameter, refer to the Add Spatial Index
tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
6.
Configuration Keyword (optional) كلمة
التكوين الرئيسية (اختياري)
Specifies the storage
parameters (configuration) for a geodatabase. Configuration keywords are set up
by your database administrator.
يحدد معلمات التخزين (التكوين) لقاعدة بيانات جغرافية.
تم إعداد الكلمات الأساسية للتكوين من قبل مسؤول قاعدة البيانات.
Output
Spatial Grid 1 (optional)
The Output Spatial Grid 1, 2, and 3 parameters are used to compute a
spatial index and only apply to file geodatabases and enterprise geodatabases.
If you are unfamiliar with setting grid sizes, leave these options as 0,0,0 and
ArcGIS will compute optimal sizes for you.
If you use the default spatial grid index (of zero), it is recommended
that you load data using the Workspace To Raster Catalog tool. If that tool is
used to load raster datasets, the spatial grid size will be automatically
calculated. If another tool is used to load raster datasets into a raster
catalog, the Calculate Default Spatial Grid Index tool needs to be used after
the loading is completed.
For more information about this parameter, refer to the Add Spatial Index
tool documentation.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
7.
Output Spatial Grid 1 (optional) شبكة
الإخراج المكانية 1 (اختياري)
The Output Spatial Grid
1, 2, and 3 parameters are used to compute a spatial index and only apply to
file geodatabases and enterprise geodatabases. If you are unfamiliar with
setting grid sizes, leave these options as 0,0,0 and ArcGIS will compute
optimal sizes for you.
If you use the default
spatial grid index (of zero), it is recommended that you load data using the
Workspace To Raster Catalog tool. If that tool is used to load raster datasets,
the spatial grid size will be automatically calculated. If another tool is used
to load raster datasets into a raster catalog, the Calculate Default Spatial
Grid Index tool needs to be used after the loading is completed.
For more information
about this parameter, refer to the Add Spatial Index tool documentation.
تُستخدم معلمات Output Spatial Grid 1 و 2 و 3 لحساب فهرس مكاني وتنطبق فقط على قواعد البيانات
الجغرافية للملف وقواعد البيانات الجغرافية للمؤسسة. إذا لم تكن على دراية بإعداد
أحجام الشبكة ، فاترك هذه الخيارات على أنها 0،0،0 وسيقوم ArcGIS بحساب
الأحجام المثلى لك.
إذا كنت تستخدم فهرس الشبكة المكانية الافتراضي
(صفر) ، فمن المستحسن أن تقوم بتحميل البيانات باستخدام أداة Workspace To Raster Catalog. إذا تم استخدام هذه الأداة لتحميل مجموعات البيانات النقطية ،
فسيتم حساب حجم الشبكة المكانية تلقائيًا. إذا تم استخدام أداة أخرى لتحميل
مجموعات البيانات النقطية في كتالوج البيانات النقطية ، فيجب استخدام أداة حساب
مؤشر الشبكة المكانية الافتراضية بعد اكتمال التحميل.
لمزيد من المعلومات حول هذه المعلمة ، راجع وثائق
أداة إضافة فهرس مكاني.
Output
Spatial Grid 2 (optional)
Cell size of the second spatial grid. Leave the size at 0 if you only want
one grid. Otherwise, set the size to at least three times larger than Spatial
Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
8.
Output Spatial Grid 2 (optional) شبكة
الإخراج المكانية 2 (اختياري)
Cell size of the second
spatial grid. Leave the size at 0 if you only want one grid. Otherwise, set the
size to at least three times larger than Spatial Grid 1.
حجم خلية الشبكة المكانية الثانية. اترك الحجم على
0 إذا كنت تريد شبكة واحدة فقط. خلاف ذلك ، اضبط الحجم على ثلاث مرات على الأقل
أكبر من Spatial Grid 1.
Output
Spatial Grid 3 (optional)
Cell size of the third spatial grid. Leave the size at 0 if you only want
two grids. Otherwise, set the size to at least three times larger than Spatial
Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
9.
Output Spatial Grid 3 (optional) شبكة
الإخراج المكانية 3 (اختياري)
Cell size of the third
spatial grid. Leave the size at 0 if you only want two grids. Otherwise, set
the size to at least three times larger than Spatial Grid 2.
حجم خلية الشبكة المكانية الثالثة. اترك الحجم على
0 إذا كنت تريد شبكتين فقط. خلاف ذلك ، اضبط الحجم على ثلاث مرات على الأقل أكبر
من Spatial Grid 2.
Raster
Management Type (optional)
Raster datasets in raster catalogs can be managed in two ways: managed or
unmanaged (by the geodatabase).
· MANAGED—With a managed raster catalog, the raster datasets in the raster
catalog will be physically stored in the geodatabase. When a row (or raster) is
deleted from the catalog, it is deleted from the geodatabase.
· UNMANAGED—With an unmanaged raster catalog, the raster catalog only
contains links or pointers connecting a row to a raster dataset stored outside
the geodatabase. All raster datasets loaded into an unmanaged raster catalog
must be a file on disk.
10.
Raster Management Type (optional) نوع
إدارة البيانات النقطية (اختياري)
Raster datasets in
raster catalogs can be managed in two ways: managed or unmanaged (by the
geodatabase).
·
MANAGED—With a managed raster catalog, the raster datasets in the
raster catalog will be physically stored in the geodatabase. When a row (or
raster) is deleted from the catalog, it is deleted from the geodatabase.
·
UNMANAGED—With an unmanaged raster catalog, the raster catalog
only contains links or pointers connecting a row to a raster dataset stored
outside the geodatabase. All raster datasets loaded into an unmanaged raster
catalog must be a file on disk.
يمكن إدارة مجموعات البيانات النقطية في كتالوجات
البيانات النقطية بطريقتين: مُدارة أو غير مُدارة (بواسطة قاعدة البيانات
الجغرافية).
• مُدار — باستخدام
كتالوج البيانات النقطية المُدار ، سيتم تخزين مجموعات البيانات النقطية الموجودة
في كتالوج البيانات النقطية فعليًا في قاعدة البيانات الجغرافية. عند حذف صف (أو
نقطية) من الكتالوج ، يتم حذفه من قاعدة البيانات الجغرافية.
• غير مُدار - باستخدام
كتالوج البيانات النقطية غير المُدار ، لا يحتوي كتالوج البيانات النقطية إلا على
ارتباطات أو مؤشرات تربط صفًا بمجموعة بيانات نقطية مخزنة خارج قاعدة البيانات
الجغرافية. يجب أن تكون جميع مجموعات البيانات النقطية التي تم تحميلها في كتالوج
البيانات النقطية غير المُدارة عبارة عن ملف على القرص.
اليك صفحه ومجموعة على الفيس بوك لتعلم أكثر بما يخص نظم المعلومات الجغرافية (GIS) و برنامج ArcGIS Pro من خلال هذه الروابط:
مجموعة على الفيس بوك
ArcGIS Pro من
هنا.
مجموعة على الفيس بوك
GIS for WE - ArcGIS Pro من
هنا.صفحة الفيس بوك
GIS for WE من
هنا.
تعليقات
إرسال تعليق